Re: [DNX#2006040142001203] [U-Boot-Users] [PATCH 5/7] Flat device tree suppor [...]

Hello list,

inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142001203] was created:

<snip>

• Added PCI and I2C support to 8540 ADS flat device tree
• Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006

Signed-off-by: Andy Fleming afleming@freescale.com

---

board/mpc8540ads/mpc8540ads.c | 21 ++------- board/mpc8540ads/oftree.dts | 98 +++++++++++++++++++++++++++++++++++++++++ include/configs/MPC8540ADS.h | 9 ++--

78e133998e9e91efcd43bf476681aad123c25aaa diff --git a/board/mpc8540ads/mpc8540ads.c b/board/mpc8540ads/mpc8540ads.c index 1252d2a..e7db14b 100644 --- a/board/mpc8540ads/mpc8540ads.c +++ b/board/mpc8540ads/mpc8540ads.c @@ -317,24 +317,8 @@ long int fixed_sdram (void)

• Initialize PCI Devices, report devices found.

*/

-#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc85xxads_config_table[] = {

• { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

•  PCI_IDSEL_NUMBER, PCI_ANY_ID,
  

•  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
  

• 		   PCI_ENET0_MEMADDR,
  

• 		   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
  

•  } },
  

• { }

-}; -#endif

-static struct pci_controller hose = { -#ifndef CONFIG_PCI_PNP

• config_table: pci_mpc85xxads_config_table,

-#endif -}; +static struct pci_controller hose;

#endif /* CONFIG_PCI */

@@ -354,6 +338,9 @@ pci_init_board(void) void ft_board_setup(void *blob, bd_t *bd) { +#ifdef CONFIG_PCI

• ft_pci_setup(blob, bd);

+#endif ft_cpu_setup(blob, bd); } #endif diff --git a/board/mpc8540ads/oftree.dts b/board/mpc8540ads/oftree.dts index 290e80e..a505f48 100644 --- a/board/mpc8540ads/oftree.dts +++ b/board/mpc8540ads/oftree.dts @@ -54,6 +54,15 @@ reg = <e0000000 00100000>; // CCSRBAR 1M bus-frequency = <0>;

• i2c@3000 {
  

• 	device_type = "i2c";
  

• 	compatible = "fsl-i2c";
  

• 	reg = <3000 100>;
  

• 	interrupts = <1b 0>;
  

• 	interrupt-parent = <40000>;
  

• 	dfsrr;
  

• };
  

• mdio@24520 { #address-cells = <1>; #size-cells = <0>;

@@ -120,6 +129,95 @@ interrupts = <1a 3>; interrupt-parent = <40000>; };

• pci@8000 {
  

• 	linux,phandle = <8000>;
  

• 	interrupt-map-mask = <f800 0 0 7>;
  

• 	interrupt-map = <
  

• 		/* IDSEL 0x02 */
  

• 		1000 0 0 1 40000 31 0
  

• 		1000 0 0 2 40000 32 0
  

• 		1000 0 0 3 40000 33 0
  

• 		1000 0 0 4 40000 34 0
  

• 		/* IDSEL 0x03 */
  

• 		1800 0 0 1 40000 34 0
  

• 		1800 0 0 2 40000 31 0
  

• 		1800 0 0 3 40000 32 0
  

• 		1800 0 0 4 40000 33 0
  

• 		/* IDSEL 0x04 */
  

• 		2000 0 0 1 40000 33 0
  

• 		2000 0 0 2 40000 34 0
  

• 		2000 0 0 3 40000 31 0
  

</snip>

Your U-Boot support team