Hi,
I'm trying to enable ethernet on a custom board with an am335x soc, and a VSC8601 connected through RGMII. The plan is to use u-boot as a first stage loader to load a proprietary application (called "the app"). The app already has its own ethernet stack and drivers, and can successfully do network talk.
I started with the am3355x config, and with a few trivial hacks, [1], [2], and [3], I was able to get the PHY recognized in u-boot. Auto-negotiation works correctly on 100Mbit link. The issue is that while packets seem to get transmitted when doing DHCP queries (light on the switch blinks), they aren't legible. I tried hooking up the board to an ethernet port with static IPs, and watching traffic with wireshark, but did not observe any packets.
I also probed the RGMII link and it seems the TX clock is running at 10 MHz, instead of 25MHz, when the app is running. At this point I suspect either a gross misconfiguration on my part, or a bug in the cpsw code.
I was hoping someone here might have an idea what to do to get ethernet working.
Thanks, Alex
[1] diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index ec70b72..63a5b29 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -433,6 +433,7 @@ #define CONFIG_PHY_SMSC /* Enable Atheros phy driver */ #define CONFIG_PHY_ATHEROS +#define CONFIG_PHY_VITESSE
/* * NOR Size = 16 MiB
[2] diff --git a/arch/arm/dts/am335x-evm.dts b/arch/arm/dts/am335x-evm.dts index c1a53e2..153a06f 100644 --- a/arch/arm/dts/am335x-evm.dts +++ b/arch/arm/dts/am335x-evm.dts @@ -585,8 +585,8 @@ };
&cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii-txid"; + phy_id = <&davinci_mdio>, <8>; + phy-mode = "rgmii"; };
&cpsw_emac1 {
[3] diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 27979bd..e758429 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -341,7 +341,7 @@ static unsigned short detect_daughter_board_profile(void) void enable_board_pin_mux(void) { /* Do board-specific muxes. */ - if (board_is_bone()) { + if (0 && board_is_bone()) { /* Beaglebone pinmux */ configure_module_pin_mux(mii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux); @@ -352,7 +352,7 @@ void enable_board_pin_mux(void) #else configure_module_pin_mux(mmc1_pin_mux); #endif - } else if (board_is_gp_evm()) { + } else if (1 || board_is_gp_evm()) { /* General Purpose EVM */ unsigned short profile = detect_daughter_board_profile(); configure_module_pin_mux(rgmii1_pin_mux);