20 Oct
2010
20 Oct
'10
12:51 p.m.
Am 2010-10-20 08:48, schrieb Andreas Bießmann:
Dear Reinhard Meyer,
Am 19.10.2010 um 20:30 schrieb Reinhard Meyer:
+#define CONFIG_SYS_TEXT_BASE 0x00000000
How does this work with a text base of 0? Am I missing something?
This should work when booting from NOR. The first MiB (0x00000000-0x00100000) is mapped to internal SRAM, internal ROM _or_ NOR on CS0 depending on 'BMS' Pin and REMAP command -> datasheet at91rm9200 p17. Nevertheless I would prefer to explicitly address NOR flash on CS0 with 0x10000000.
This is right. The board boot from a 16-bit NOR Flash.
regards
Jens Scharsig