The default Ten64 MTD configuration reserves two ubifs partitions for OpenWrt residing on NAND flash. Add the bootcmd for this system into the default environment.
Signed-off-by: Mathew McBride matt@traverse.com.au --- include/configs/ten64.h | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/include/configs/ten64.h b/include/configs/ten64.h index 1b8b27c230..f9e800d4b6 100644 --- a/include/configs/ten64.h +++ b/include/configs/ten64.h @@ -39,6 +39,11 @@ func(PXE, pxe, 0) #include <config_distro_bootcmd.h>
+#define OPENWRT_NAND_BOOTCMD \ + "bootcmd_openwrt_nand=ubi part ubi${openwrt_active_sys} && "\ + "ubi read $load_addr kernel && " \ + "setenv bootargs "root=/dev/ubiblock0_1 earlycon ubi.mtd=ubi${openwrt_active_sys}" &&"\ + "bootm $load_addr#ten64\0" #undef CFG_EXTRA_ENV_SETTINGS
#define CFG_EXTRA_ENV_SETTINGS \ @@ -48,6 +53,8 @@ "kernel_addr_r=0x81000000\0" \ "load_addr=0xa0000000\0" \ BOOTENV \ + OPENWRT_NAND_BOOTCMD \ + "openwrt_active_sys=a\0" \ "load_efi_dtb=mtd read devicetree $fdt_addr_r && fdt addr $fdt_addr_r && " \ "fdt resize && fdt boardsetup\0" \ "bootcmd_recovery=mtd read recovery 0xa0000000 && " \