On 30.10.2018 22:26, Marek Vasut wrote:
On 10/30/2018 10:23 PM, Simon Goldschmidt wrote:
Correctly define CONFIG_SPL_MAX_FOOTPRINT to make the default arm linker script for SPL check the total SRAM size available for SPL (code, data, bss, heap, global data).
The previously existing define CONFIG_SPL_MAX_SIZE seems to only check the binary size (which is without bss, heap and gd).
Signed-off-by: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com
include/configs/socfpga_common.h | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 2330143cf1..9103d0a966 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -242,6 +242,13 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
+/* Check total size of SPL including BSS, malloc area and gd */ +#include <generated/generic-asm-offsets.h> +#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_SP_ADDR - \
CONFIG_SYS_INIT_RAM_ADDR - \CONFIG_SYS_MALLOC_F_LEN - \GENERATED_GBL_DATA_SIZE)Are you sure this calculation is correct ? INIT_SP_ADDR is I think the SRAM offset in the address space. Shouldn't that contain INIT_SP_SIZE or something ?
Yes, I'm pretty sure. INIT_SP_ADDR is defined as INIT_RAM_ADDR + INIT_RAM_SIZE. So by subtracting INIT_RAM_ADDR again, I effectively get "INIT_RAM_ADDR - MALLOC_F_LEN - GBL_DATA_SIZE".
But I did it this way to keep it working after Stefan's fix for reserving the boot counter location is applied.
Simon