On Fri, 1 Feb 2019 16:40:11 +0000 Abel Vesa abel.vesa@nxp.com wrote:
Since the fsl_esdhc will also be used by SPL, make the preprocessor switches more generic to allow any kind of build.
The same here - as with ehci-mx6. Thanks Abel for this patch.
Reviewed-by: Lukasz Majewski lukma@denx.de
Signed-off-by: Abel Vesa abel.vesa@nxp.com
drivers/mmc/fsl_esdhc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 21fa2ab..9e34557 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -804,7 +804,7 @@ static int esdhc_set_voltage(struct mmc *mmc) case MMC_SIGNAL_VOLTAGE_330: if (priv->vs18_enable) return -EIO; -#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED(DM_REGULATOR) if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) { ret = regulator_set_value(priv->vqmmc_dev, 3300000); if (ret) { @@ -823,7 +823,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
return -EAGAIN;case MMC_SIGNAL_VOLTAGE_180: -#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED(DM_REGULATOR) if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) { ret = regulator_set_value(priv->vqmmc_dev, 1800000); if (ret) { @@ -1442,7 +1442,7 @@ static int fsl_esdhc_probe(struct udevice *dev) int node = dev_of_offset(dev); struct esdhc_soc_data *data = (struct esdhc_soc_data *)dev_get_driver_data(dev); -#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED(DM_REGULATOR) struct udevice *vqmmc_dev; #endif fdt_addr_t addr; @@ -1500,7 +1500,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
priv->vs18_enable = 0;
-#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED(DM_REGULATOR) /* * If emmc I/O has a fixed voltage at 1.8V, this must be provided, * otherwise, emmc will work abnormally.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de