On Fri, 25 Oct 2019 16:22:09 +0200 Simon Goldschmidt simon.k.r.goldschmidt@gmail.com wrote:
As SPL_SPI_FLASH_SUPPORT cannot work without SPL_SPI_SUPPORT, fix dependencies to prevent enabling SPI flash support without basic SPI support.
Signed-off-by: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com
Changes in v2:
- move SYS_SPI_U_BOOT_OFFS out of the SPL_SPI_FLASH_SUPPORT guard since that broke sunxi SPL (which uses non-DM spi)
common/spl/Kconfig | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 86d7edfee1..b8d234eb5e 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1014,8 +1014,19 @@ config SPL_SERIAL_SUPPORT unless there are space reasons not to. Even then, consider enabling SPL_USE_TINY_PRINTF which is a small printf() version. +config SPL_SPI_SUPPORT
- bool "Support SPI drivers"
- help
Enable support for using SPI in SPL. This is used forconnecting
to SPI flash for loading U-Boot. See SPL_SPI_FLASH_SUPPORTfor
more details on that. The SPI driver provides thetransport for
data between the SPI flash and the CPU. This option can beused to
enable SPI drivers that are needed for other purposesalso, such
as a SPI PMIC.config SPL_SPI_FLASH_SUPPORT bool "Support SPI flash drivers"
- depends on SPL_SPI_SUPPORT help Enable support for using SPI flash in SPL, and loading
U-Boot from SPI flash. SPI flash (Serial Peripheral Bus flash) is named after @@ -1060,16 +1071,6 @@ config SYS_SPI_U_BOOT_OFFS Address within SPI-Flash from where the u-boot payload is fetched from.
-config SPL_SPI_SUPPORT
- bool "Support SPI drivers"
- help
Enable support for using SPI in SPL. This is used forconnecting
to SPI flash for loading U-Boot. See SPL_SPI_FLASH_SUPPORTfor
more details on that. The SPI driver provides thetransport for
data between the SPI flash and the CPU. This option can beused to
enable SPI drivers that are needed for other purposesalso, such
as a SPI PMIC.config SPL_THERMAL bool "Driver support for thermal devices" help
Reviewed-by: Lukasz Majewski lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de