
On 26.05.20 22:13, Anatolij Gustschin wrote:
On Sun, 24 May 2020 17:46:22 +0200 Soeren Moch smoch@web.de wrote:
On 23.05.20 01:24, Anatolij Gustschin wrote:
Migration to DM_VIDEO driver is long overdue, configure it in board config files. To enable the display set stdout like:
setenv stdout serial,vidconsole
Signed-off-by: Anatolij Gustschin agust@denx.de
This is only build tested.
I tested this on top of v2020.07-rc2 and your patch "video: extend stdout video console work-around for 'vga'"
Works great. However, some comments below.
Thanks for testing!
...
+CONFIG_SYS_MALLOC_F_LEN=0x4000
This is not necessary. The default 0x2000 also works fine.
Dropped in v2.
...
Since DM_VIDEO requires vidconsole as output device, please also add
---8<--- diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 8ab3fcfe3e..82165a9ffe 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -92,11 +92,11 @@ "fan=gpio set 92\0" \ "set_con_serial=setenv stdout serial; " \ "setenv stderr serial\0" \ - "set_con_hdmi=setenv stdout serial,vga; " \ - "setenv stderr serial,vga\0" \ - "stderr=serial,vga\0" \ + "set_con_hdmi=setenv stdout serial,vidconsole; " \ + "setenv stderr serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" \ "stdin=serial,usbkbd\0" \ - "stdout=serial,vga\0" + "stdout=serial,vidconsole\0" #define CONFIG_BOOTCOMMAND \ "mmc rescan; " \ ---8<---
to avoid warnings for users with default environment.(not sure if whitespace is still correct in this snippet)
Done in v2.
With this DM_VIDEO conversion the board comes very close to the size limit. While it works with my toolchain, there might be problems with others. So maybe not a good idea to merge this as fix immediately.
Yes, with GCC 9.2 it didn't work any more. I've submitted some DM_VIDEO patches to disable more unused code to fix this.
Since this depends on your above mentioned patch, do you plan to merge this via u-boot-video, or should this go as usual through the imx tree?
I'll merge this via u-boot-video tree. v2 patch depends on a few more video patches which are under review/built-test currently.
OK, I will try to test this new version again on top of your other patches.
Do you plan to merge this for v2020.07, or for -next?
Soeren