Hi, Przemyslaw
There is a return value comments that from Fabio, I correct it and send out v3 version. Others are same to the v1 version patch set. If this patch set is fine, please give you Acked-by. Sorry for the troubles.
This patch set is to support buck regulator can working in different switching modes. To improve system efficiency the buck regulators can operate in different switching modes.
patch 1/3 is to add related bit definitions and registers. patch 2/3 is to implement the switching mode init function. patch 3/3 is to add related mode init function in board code.
mx6slevk board is not included in this patch set, since power and i2c interface are not implemented for it. Future patch will cover this to add PAD setting, power_init_board and etc.
Peng Fan (3): pmic:pfuz100 add switch mode and more registers pmic:pfuze implement pmic_mode_init imx:mx6 set normal APS and standby PFM mode
board/freescale/common/pfuze.c | 36 ++++++++++++++++++ board/freescale/common/pfuze.h | 1 + board/freescale/mx6qsabreauto/mx6qsabreauto.c | 6 +++ board/freescale/mx6sabresd/mx6sabresd.c | 6 ++- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 6 ++- include/power/pfuze100_pmic.h | 53 +++++++++++++++++++++++++++ 6 files changed, 106 insertions(+), 2 deletions(-)