Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive damage.
Signed-off-by: Giulio Benetti giulio.benetti@benettiengineering.com --- V2->V3: * change /dev/sdb to /dev/sdX as suggested by Fabio --- board/freescale/imxrt1050-evk/README | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README index f7e2894025..a7e68fa9b3 100644 --- a/board/freescale/imxrt1050-evk/README +++ b/board/freescale/imxrt1050-evk/README @@ -11,11 +11,11 @@ This will generate the SPL image called SPL and the u-boot.img.
- Flash the SPL image into the micro SD card:
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync +sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
- Flash the u-boot.img image into the micro SD card:
-sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=128; sync +sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync
- Jumper settings: