This mvebu msys platform always uses fixed 200 MHz TCLK. So specify this CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of manual configuration in every board file.
Signed-off-by: Pali Rohár pali@kernel.org --- arch/arm/mach-mvebu/include/mach/soc.h | 2 ++ include/configs/crs3xx-98dx3236.h | 1 - include/configs/db-xc3-24g4xg.h | 1 - 3 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index eb6906ad8027..e29c0f32c3de 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -187,6 +187,8 @@ #define BOOT_FROM_NAND 0x1 #define BOOT_FROM_UART 0x2 #define BOOT_FROM_SPI 0x3 + +#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ #else /* SAR values for Armada XP */ #define CONFIG_SAR_REG (MVEBU_REGISTER(0x18230)) diff --git a/include/configs/crs3xx-98dx3236.h b/include/configs/crs3xx-98dx3236.h index e2ba7b81263f..3feaa60edad8 100644 --- a/include/configs/crs3xx-98dx3236.h +++ b/include/configs/crs3xx-98dx3236.h @@ -12,7 +12,6 @@
#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) /* 64 MB */ #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg -#define CONFIG_SYS_TCLK 200000000 /* 200MHz */
/* USB/EHCI configuration */ #define CONFIG_EHCI_IS_TDI diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h index 0e9ccd9b4419..f04ae487b76a 100644 --- a/include/configs/db-xc3-24g4xg.h +++ b/include/configs/db-xc3-24g4xg.h @@ -11,7 +11,6 @@ */
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg -#define CONFIG_SYS_TCLK 200000000 /* 200MHz */
/* USB/EHCI configuration */ #define CONFIG_EHCI_IS_TDI