Stefan Roese wrote:
DRAM: 64 MB ERROR: too many flash sectors ERROR: too many flash sectors
This error is important. Searching in the source code
gives you an hint. You
should increase CONFIG_SYS_MAX_FLASH_SECT to match you hardware.
Cheers, Stefan
Stefan Roese wrote:
On Thursday 20 August 2009 16:45:28 SlinceArm wrote:
Hi , everyone .
My u-boot version is 2009-01 and i try porting u-boot on pxa270 development board. when i power on my board then minicom show these information
DRAM: 64 MB ERROR: too many flash sectors ERROR: too many flash sectors
This error is important. Searching in the source code gives
you an hint.
You should increase CONFIG_SYS_MAX_FLASH_SECT to match you hardware.
Cheers, Stefan
Thanks for your reply , Stefan. : )
My flash is 32MB
and here is my source code for flash environment
#define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
#define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 128
Please check your sector size CONFIG_SYS_ENV_SECT_SIZE and multiply with your CONFIG_SYS_MAX_FLASH_SECT should not cross 32MB
What code did set wrong ??
View this message in context: http://www.nabble.com/-U-Boot--ERROR%3A-too-many-flash-sectors -tp25063511p25090177.html Sent from the Uboot - Users mailing list archive at Nabble.com.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot