From: David Brownell dbrownell@users.sourceforge.net
Fix two buglets in the dm644x support: don't set two must-be-zero bits in the UART management register; and only include the I2C hooks if the I2C driver is being included.
Signed-off-by: David Brownell dbrownell@users.sourceforge.net --- cpu/arm926ejs/davinci/dm644x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/cpu/arm926ejs/davinci/dm644x.c +++ b/cpu/arm926ejs/davinci/dm644x.c @@ -41,7 +41,7 @@ void davinci_enable_uart0(void) lpsc_on(DAVINCI_LPSC_UART0);
/* Bringup UART0 out of reset */ - REG(UART0_PWREMU_MGMT) = 0x0000e003; + REG(UART0_PWREMU_MGMT) = 0x00006001;
/* Enable UART0 MUX lines */ REG(PINMUX1) |= PINMUX1_UART0; @@ -62,6 +62,7 @@ void davinci_enable_emac(void) } #endif
+#ifdef CONFIG_DRIVER_DAVINCI_I2C void davinci_enable_i2c(void) { lpsc_on(DAVINCI_LPSC_I2C); @@ -69,6 +70,7 @@ void davinci_enable_i2c(void) /* Enable I2C pin Mux */ REG(PINMUX1) |= PINMUX1_I2C; } +#endif
void davinci_errata_workarounds(void) {