Improve documentation.
Signed-off-by: Christian Hewitt christianshewitt@gmail.com --- doc/board/amlogic/beelink-gtkingpro.rst | 120 ++++++++++++------------ 1 file changed, 60 insertions(+), 60 deletions(-)
diff --git a/doc/board/amlogic/beelink-gtkingpro.rst b/doc/board/amlogic/beelink-gtkingpro.rst index 07bb04bb36..541938b103 100644 --- a/doc/board/amlogic/beelink-gtkingpro.rst +++ b/doc/board/amlogic/beelink-gtkingpro.rst @@ -1,10 +1,10 @@ .. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Beelink GT-King Pro -============================== +U-Boot for Beelink GT-King Pro (S922X) +======================================
-The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference -board with an S922X-H chip. +The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference board with +an S922X-H chip and the following specifications:
- 4GB LPDDR4 RAM - 64GB eMMC storage @@ -19,10 +19,10 @@ board with an S922X-H chip. - 1x SD card slot - 1x Power on/off button
-Beelink do not provide public schematics, but have been willing -to share them with known distro developers on request. +Beelink do not provide public schematics, but have been willing to share them with known +distro developers to assist with development.
-U-Boot compilation +U-Boot Compilation ------------------
.. code-block:: bash @@ -31,21 +31,21 @@ U-Boot compilation $ make beelink-gtkingpro_defconfig $ make
-Image creation --------------- +U-Boot Signing with Pre-Built FIP repo +--------------------------------------
-Amlogic does not provide sources for the firmware and for tools needed -to create the bootloader image. Beelink have provided the Amlogic "SDK" -in their forums, but the u-boot sources included result in 2GB RAM being -detected. The following FIPs were generated with newer private sources -and give correct (4GB) RAM detection: - -https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x +.. code-block:: bash + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1 + $ cd amlogic-boot-fip + $ mkdir my-output-dir + $ ./build-fip.sh beelink-s922x /path/to/u-boot/u-boot.bin my-output-dir
-NB: Beelink use a common board config for GT-King, GT-King Pro and the -GS-King-X model, hence the "beelink-s922x" name. +U-Boot Manual Signing +---------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `beelink-s922x` +Beelink released an Amlogic "SDK" dump in their forums, but the U-Boot sources included +result in 2GB RAM detected. The following FIPs were generated with newer sources and +detect 4GB RAM: https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
.. code-block:: bash
@@ -62,57 +62,57 @@ Go back to the mainline U-Boot source tree then: $ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30
$ sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 + --output fip/bl30_new.bin.g12a.enc \ + --level v3 $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 + --output fip/bl31.img.enc \ + --level v3 --type bl31 $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 + --output fip/bl33.bin.enc \ + --level v3 --type bl33 $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig + --output fip/bl2.n.bin.sig $ fip/aml_encrypt_g12b --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --level v3 - -and then write the image to SD with: + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device + $ DEV=/dev/boot_device $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440