As K2 can directly boot u-boot, re-use u-boot_HS_XIP_X-LOADER as the secure image while booting secure K2 devices. Updates the comments in the file to reflect this.
Signed-off-by: Madan Srinivas madans@ti.com ---
arch/arm/cpu/armv7/omap-common/config_secure.mk | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/omap-common/config_secure.mk b/arch/arm/cpu/armv7/omap-common/config_secure.mk index 1122439..ae5e8de 100644 --- a/arch/arm/cpu/armv7/omap-common/config_secure.mk +++ b/arch/arm/cpu/armv7/omap-common/config_secure.mk @@ -78,7 +78,9 @@ u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin
# For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot # file, not an SPL. In this case the mkomapsecimg command looks for a -# u-boot-HS_* prefix +# u-boot-HS_* prefix. Keystone devices also support a single stage boot +# so this image can be used for booting from all media on keystone +# secure devices u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin $(call if_changed,mkomapsecimg)