The TCG event log buffer is being set at the end of ram memory. This region of memory is to be reserved as LMB_NOMAP memory in the LMB memory map. The current location of this buffer overlaps with the memory region reserved for the U-Boot image, which is at the top of the usable memory. This worked earlier as the LMB memory map was not global but caller specific, but fails now because of the overlap.
Move the TCG event log buffer to the start of the ram memory region instead. Move the location of the early trace buffer and the load buffer for U-Boot(spl boot) accordingly.
Signed-off-by: Sughosh Ganu sughosh.ganu@linaro.org Reviewed-by: Simon Glass sjg@chromium.org --- Changes since V3: None
arch/sandbox/dts/test.dts | 2 +- configs/sandbox_spl_defconfig | 2 +- doc/arch/sandbox/sandbox.rst | 5 +++-- lib/Kconfig | 2 +- 4 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 5fb5eac862..8412506c17 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -78,7 +78,7 @@
event_log: tcg_event_log { no-map; - reg = <(CFG_SYS_SDRAM_SIZE - 0x2000) 0x2000>; + reg = <(CFG_SYS_SDRAM_BASE + 0x100000) 0x2000>; }; };
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index f7b92dc844..826a82d092 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -1,4 +1,4 @@ -CONFIG_TEXT_BASE=0x200000 +CONFIG_TEXT_BASE=0x400000 CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y diff --git a/doc/arch/sandbox/sandbox.rst b/doc/arch/sandbox/sandbox.rst index 5f8db12665..4967551724 100644 --- a/doc/arch/sandbox/sandbox.rst +++ b/doc/arch/sandbox/sandbox.rst @@ -662,7 +662,8 @@ Addr Config Usage b000 CONFIG_BLOBLIST_ADDR Blob list 10000 CFG_MALLOC_F_ADDR Early memory allocation f0000 CONFIG_PRE_CON_BUF_ADDR Pre-console buffer - 100000 CONFIG_TRACE_EARLY_ADDR Early trace buffer (if enabled). Also used + 100000 TCG Event log TCG Event Log + 200000 CONFIG_TRACE_EARLY_ADDR Early trace buffer (if enabled). Also used as the SPL load buffer in spl_test_load(). - 200000 CONFIG_TEXT_BASE Load buffer for U-Boot (sandbox_spl only) + 400000 CONFIG_TEXT_BASE Load buffer for U-Boot (sandbox_spl only) ======= ======================== =============================== diff --git a/lib/Kconfig b/lib/Kconfig index e352b5550a..5f282ecb54 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -403,7 +403,7 @@ config TRACE_EARLY_CALL_DEPTH_LIMIT config TRACE_EARLY_ADDR hex "Address of early trace buffer in U-Boot" depends on TRACE_EARLY - default 0x00100000 + default 0x00200000 help Sets the address of the early trace buffer in U-Boot. This memory must be accessible before relocation.