This patch fixed compiler errors due to missing definitions of CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR.
The board doesn't start, though. A v2 of this patch or a seperate patch will fix the error when it was found.
Signed-off-by: Torsten Koschorrek koschorrek@synertronixx.de --- board/scb9328/config.mk | 2 +- board/scb9328/scb9328.c | 10 +++++++++- include/configs/scb9328.h | 3 +++ 3 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/board/scb9328/config.mk b/board/scb9328/config.mk index 7c5e067..6e411de 100644 --- a/board/scb9328/config.mk +++ b/board/scb9328/config.mk @@ -7,4 +7,4 @@ # the code in RAM device only. # -CONFIG_SYS_TEXT_BASE = 0x08f00000 +CONFIG_SYS_TEXT_BASE = 0x10000000 diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c index 428e8c9..631f4e3 100644 --- a/board/scb9328/scb9328.c +++ b/board/scb9328/scb9328.c @@ -39,6 +39,15 @@ int board_init (void) int dram_init (void) { + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile void *)SCB9328_SDRAM_1, + SCB9328_SDRAM_1_SIZE); + + return 0; +} + +void dram_init_banksize (void) +{ #if ( CONFIG_NR_DRAM_BANKS > 0 ) gd->bd->bi_dram[0].start = SCB9328_SDRAM_1; gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE; @@ -55,7 +64,6 @@ int dram_init (void) gd->bd->bi_dram[3].start = SCB9328_SDRAM_4; gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE; #endif - return 0; } /** diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 3da214e..c610ed1 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -127,6 +127,9 @@ #define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */ #define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */ +#define CONFIG_SYS_SDRAM_BASE SCB9328_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR SCB9328_SDRAM_1 + 0xf00000 + /* * Configuration for FLASH memory for the Synertronixx board */