[U-Boot] openrd_ultimate GigEth ports not working

Alex Zeffertt writes:

and then I burn the .kwb file into the flash using openocd.

Unfortunately I cannot get the Gig Eth ports to work in u-boot at the moment. When I run the following at the command prompt the console just hangs and I have to reboot:

Marvell>> setenv ipaddr 192.168.1.1 Marvell>> ping 192.168.1.30 ... board hangs ...

Has anybody else seen this issue?

I see something similar with the Seagate Dockstar (also Kirkwood) when using dhcp. It also hangs. I did not test ping. The 2011.06 snapshot works fine.

-Ralph