The OMAPL138-LCD board uses a NAND chip with a 16 bits bus. Add support into the davinci driver for 16 bit bus NAND chips.
Signed-off-by: Fabien Parent fparent@baylibre.com --- drivers/mtd/nand/davinci_nand.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 48a8ca7..0624644 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -799,6 +799,9 @@ void davinci_nand_init(struct nand_chip *nand) #ifdef CONFIG_SYS_NAND_NO_SUBPAGE_WRITE nand->options |= NAND_NO_SUBPAGE_WRITE; #endif +#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT + nand->options |= NAND_BUSWIDTH_16; +#endif #ifdef CONFIG_SYS_NAND_HW_ECC nand->ecc.mode = NAND_ECC_HW; nand->ecc.size = 512;