
2 Jun
2005
2 Jun
'05
5:46 p.m.
In message 429F1E26.1010508@web.de you wrote:
I had the following assumptions:
- The MPC875 will try to boot from 0xfff00100 due to my HRCW settings,
which cause MSR[IP] to be "1". 2. The whole memory is tiled with the first 64K of the flash due to the fact that OR0 is 0x00000ff4 when the board boots, which should mask out
Did you read the MPC8xx User's Manual about how the processor comes up from reset? Read it again, please.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
There are three things I always forget. Names, faces - the third I
can't remember. - Italo Svevo