[U-Boot] [PATCH] rockchip: rk3399: use regulators_enable_boot_on() to init regulator

Use regulators_enable_boot_on() instead of init regulators one by one, the interface can init all the regulators with regulator-boot-on property.

Signed-off-by: Kever Yang kever.yang@rock-chips.com ---

board/rockchip/evb_rk3399/evb-rk3399.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c index c437f1b..2ebdee7 100644 --- a/board/rockchip/evb_rk3399/evb-rk3399.c +++ b/board/rockchip/evb_rk3399/evb-rk3399.c @@ -40,10 +40,9 @@ int board_init(void) goto out; }

- /* rk3399 need init vdd_center to get correct output voltage */ - ret = regulator_get_by_platname("vdd_center", &regulator); + ret = regulators_enable_boot_on(false); if (ret) - debug("%s: Cannot get vdd_center regulator\n", __func__); + debug("%s: Cannot enable boot on regulator\n", __func__);

ret = regulator_get_by_platname("vcc5v0_host", &regulator); if (ret) {