2017-10-13 19:21 GMT+09:00 Masahiro Yamada yamada.masahiro@socionext.com:
- Reactor of GPIO, clk, reset drivers.
- Clean up SOC code
- Sync DT
- Use more clock drivers
- Split U-Boot specific DT property
Masahiro Yamada (20): ARM: uniphier: switch to CONFIG_ENV_IS_NOWHERE gpio: uniphier: rework single device node model ARM: dts: uniphier: update GPIO nodes pinctrl: uniphier: set PUPD_SIMPLE cap flag for PXs3 pinctrl: uniphier: simplify input enable and delete pin arrays ARM: uniphier: use pr_() instead of printf() where appropriate usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h> i2c: uniphier: replace debug() with dev_dbg() i2c: uniphier-f: replace debug() with dev_dbg() clk: uniphier: rework for better clock tree structure clk: uniphier: add PXs3 clock data clk: uniphier: add peripheral clock data reset: uniphier: fix the first argument passed to dev_err() i2c: uniphier: use clk for enable and get_rate i2c: uniphier-f: use clk for enable and get_rate ARM: uniphier: split u-boot,dm-pre-reloc out to uniphier-v7-u-boot.dtsi ARM: dts: uniphier: prepare to use clock for serial serial: uniphier: use clk for enable and get_rate ARM: dts: uniphier: sync DT with Linux 4.14-rc4 ARM: uniphier: change the default of SoC select to UNIPHIER_V7_MULTI
1-11, 13, 20 applied to u-boot-uniphier.
The others have been deferred because I found the SPL size exceeds the limit depending on compiler.