Hi,
I am getting the following error after running make all for coreboot target,from /usr/bin/ld.bfd.real: skipping incompatible /home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/arch/x86/lib/libgcc.a when searching for -lgcc /usr/bin/ld.bfd.real: cannot find -lgcc make: *** [u-boot] Error 1
Please help me.
Best Regards, Manohar
-----Original Message----- From: "Graeme Russ" graeme.russ@gmail.com Sent: Friday, November 23, 2012 4:23pm To: manohar.betham@smartplayin.com Cc: "Marek Vasut" marex@denx.de, u-boot@lists.denx.de, "Simon Glass" sjg@chromium.org Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
Hi Manohar,
On 11/23/2012 09:10 PM, manohar.betham@smartplayin.com wrote:
Dear Graeme,
Thank you!
I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link.
Depending on when you downloaded it, you may not have the latest mainline which is at:
http://git.denx.de/?p=u-boot.git;a=summary
Nevertheless, you will have the latest x86 patches
and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same . cd u-boot-x86
Hmm, I don't think U-Boot is what your after. There are a few problems you will be faced with: - There is no ACPI support (no power management) - No System Management Mode (SMM) support - No chipset support (No RAM initialisation) - No Cache-As-RAM init code
Unless you have at least these covered, you will brick your board if you try to flash U-Boot. You might instead take a look at coreboot
opened the boards.config file and appended my board details in the config file .
MIH61R-MB x86 x86 MIH61R-MB GenuineIntel - # Target ARCH CPU Board name Vendor SoC Options
and then run the below commands and i didnot modify any code other than that above line. .....................................................................................................................................
manoharb@smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg manoharb@smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean /bin/bash: i386-linux-gcc: command not found /bin/bash: i386-linux-gcc: command not found
[snip]
Ah, I now see that the patch I thought had been applied has not :(
You will need this patch:
http://patchwork.ozlabs.org/patch/155727/
Regards,
Graeme
...............................................................................................................................................................................................................................................................................................................................................
Please help me what are the files i need to modify and provide me the documentation.
Thank you! Best Regards, Manohar 8790215215
-----Original Message----- From: "Graeme Russ" graeme.russ@gmail.com Sent: Friday, November 23, 2012 12:12pm To: manohar.betham@smartplayin.com Cc: "Marek Vasut" marex@denx.de, u-boot@lists.denx.de Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
Hi Manohar,
On 11/23/2012 04:46 PM, manohar.betham@smartplayin.com wrote:
Dear Marek,
Thank you for the reply.
Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.
I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using the standard GNU gcc package. There was an issue with the Makefile and there was a need to manually create some toolchain symlinks, but the was rectified some time ago. Are you using the latest mainline U-Boot from git.denx.de? If so, what errors are you getting - please provide a copy of your build output.
We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
What are the config/code i need to change to make my pc as host & target are the same.
Are you planning on running U-Boot on an x86_64 machine? If so, you will need to create code to support that - Current U-Boot only supports 32-bit x86 targets. The sandbox target (designed for testing on a Linux host, not for downloading onto a board) should run on an x86_64 host.
Please help us to build the u-boot on x86_64.
Please provide more detail - what have you tried? What was the result? The build scripts should work as is on a properly configured x86_64 build machine
Regards,
Graeme
P.S. Please stop top posting - thanks
Thank you! Best Regards, Manohar 8790215215
-----Original Message----- From: "Marek Vasut" marex@denx.de Sent: Friday, November 23, 2012 6:08am To: u-boot@lists.denx.de Cc: manohar.betham@smartplayin.com, "Graeme Russ" graeme.russ@gmail.com Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
Dear manohar.betham@smartplayin.com,
Hi,
I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz) using u-boot to work for TIZEN .
As I am unable to configure/build my pc using u-boot-x86 .
I request you please help me how to configure it/build the u-boot-x86 on my pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as host and target are the same.
Please resolve the issue/is my PC support for the u-boot.
You need to compile it on a 32bit machine ... or install 32bit cross compiler ... u-boot doesn't support x86/64. Patches are welcome though.
Best regards, Marek Vasut