From: Shivamurthy Shastri sshivamurthy@micron.com
Add device table for new Micron SPI NAND devices, which have multiple dies.
Also, enable support to select the dies.
Signed-off-by: Shivamurthy Shastri sshivamurthy@micron.com --- drivers/mtd/nand/spi/micron.c | 55 +++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)
diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c index fe91349999c6..6bacf14aafea 100644 --- a/drivers/mtd/nand/spi/micron.c +++ b/drivers/mtd/nand/spi/micron.c @@ -24,6 +24,14 @@
#define MICRON_CFG_CR BIT(0)
+/* + * As per datasheet, die selection is done by the 6th bit of Die + * Select Register (Address 0xD0). + */ +#define MICRON_DIE_SELECT_REG 0xD0 + +#define MICRON_SELECT_DIE(x) ((x) << 6) + static SPINAND_OP_VARIANTS(read_cache_variants, SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0), SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0), @@ -70,6 +78,20 @@ static const struct mtd_ooblayout_ops micron_8_ooblayout = { .rfree = micron_8_ooblayout_free, };
+static int micron_select_target(struct spinand_device *spinand, + unsigned int target) +{ + struct spi_mem_op op = SPINAND_SET_FEATURE_OP(MICRON_DIE_SELECT_REG, + spinand->scratchbuf); + + if (target > 1) + return -EINVAL; + + *spinand->scratchbuf = MICRON_SELECT_DIE(target); + + return spi_mem_exec_op(spinand->slave, &op); +} + static int micron_8_ecc_get_status(struct spinand_device *spinand, u8 status) { @@ -137,6 +159,17 @@ static const struct spinand_info micron_spinand_table[] = { 0, SPINAND_ECCINFO(µn_8_ooblayout, micron_8_ecc_get_status)), + /* M79A 4Gb 3.3V */ + SPINAND_INFO("MT29F4G01ADAGD", 0x36, + NAND_MEMORG(1, 2048, 128, 64, 2048, 2, 1, 2), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(µn_8_ooblayout, + micron_8_ecc_get_status), + SPINAND_SELECT_TARGET(micron_select_target)), /* M70A 4Gb 3.3V */ SPINAND_INFO("MT29F4G01ABAFD", 0x34, NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1), @@ -157,6 +190,28 @@ static const struct spinand_info micron_spinand_table[] = { SPINAND_HAS_CR_FEAT_BIT, SPINAND_ECCINFO(µn_8_ooblayout, micron_8_ecc_get_status)), + /* M70A 8Gb 3.3V */ + SPINAND_INFO("MT29F8G01ADAFD", 0x46, + NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 2), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_CR_FEAT_BIT, + SPINAND_ECCINFO(µn_8_ooblayout, + micron_8_ecc_get_status), + SPINAND_SELECT_TARGET(micron_select_target)), + /* M70A 8Gb 1.8V */ + SPINAND_INFO("MT29F8G01ADBFD", 0x47, + NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 2), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_CR_FEAT_BIT, + SPINAND_ECCINFO(µn_8_ooblayout, + micron_8_ecc_get_status), + SPINAND_SELECT_TARGET(micron_select_target)), };
static int micron_spinand_detect(struct spinand_device *spinand)