I am seeing model detection problems with the current git master.
U-Boot 2024.04-rc5 (Mar 26 2024 - 15:59:22 +0100)
CPU: Freescale i.MX6Q rev1.3 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 26C Reset cause: POR Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc) gpio@20a4000: set_dir_flags: error: gpio GPIO3_8 not reserved gpio@20a4000: get_value: error: gpio GPIO3_8 not reserved gpio@20a8000: set_dir_flags: error: gpio GPIO4_4 not reserved gpio@20a8000: get_value: error: gpio GPIO4_4 not reserved gpio@20b0000: set_dir_flags: error: gpio GPIO6_9 not reserved gpio@20b0000: get_value: error: gpio GPIO6_9 not reserved Board: MX6 HummingBoard DRAM: 2 GiB Core: 82 devices, 17 uclasses, devicetree: fit MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: eth0: ethernet@2188000
I did a git bisect to find the commit that broke model detection:
# good: [4459ed60cb1e0562bc5b40405e2b4b9bbf766d57] Prepare v2023.10 git bisect good 4459ed60cb1e0562bc5b40405e2b4b9bbf766d57 # bad: [873791433602281ed230486606e326983c97a285] Merge https://source.denx.de/u-boot/custodians/u-boot-riscv git bisect bad 873791433602281ed230486606e326983c97a285 # bad: [6e0a75d3162a024cb0cdedd871d435e6ee782447] configs: Resync with savedefconfig git bisect bad 6e0a75d3162a024cb0cdedd871d435e6ee782447 # good: [99b46477e3495f819f6826d11470d46f12a4f9f7] clk: Dont return error when assigned-clocks is empty or missing git bisect good 99b46477e3495f819f6826d11470d46f12a4f9f7 # bad: [50fa67d091b6ffbc1d77d3100d7b31795bf64928] arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS git bisect bad 50fa67d091b6ffbc1d77d3100d7b31795bf64928 # bad: [827cece3aa550d41e9c08c640b3a73372c8fb14a] pinctrl: renesas: Synchronize R8A77980 V3H PFC tables with Linux 6.5.3 git bisect bad 827cece3aa550d41e9c08c640b3a73372c8fb14a # good: [623b3e8f9718a1fbd612b3e42451859e9f98a947] x86: spl: Change the condition for copying U-Boot to RAM git bisect good 623b3e8f9718a1fbd612b3e42451859e9f98a947 # good: [ad57b98e212bd15492398cea3a8d4df6297e16fd] x86: doc: Split out manual booting into its own file git bisect good ad57b98e212bd15492398cea3a8d4df6297e16fd # bad: [6d53b50888315252cdd3251551add7a9108a1300] ARM: renesas: Enable DM_ETH_PHY on 64-bit R-Car boards git bisect bad 6d53b50888315252cdd3251551add7a9108a1300 # bad: [283dcb63cb7d124fa427938f39aa9362872e02fc] buildman: Show progress when regenerating the board.cfg file git bisect bad 283dcb63cb7d124fa427938f39aa9362872e02fc # bad: [9e644284ab812f2db23f6185af77c0e771b0be73] dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation git bisect bad 9e644284ab812f2db23f6185af77c0e771b0be73 # good: [b05a184379631d13c4a49e423aa1324dc1ae6158] Merge tag 'x86-pull-20230922' of https://source.denx.de/u-boot/custodians/u-boot-x86 into next git bisect good b05a184379631d13c4a49e423aa1324dc1ae6158 # first bad commit: [9e644284ab812f2db23f6185af77c0e771b0be73] dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation
If I revert 9e644284ab812f2db23f6185af77c0e771b0be73 on top of git master everything is fine again. As I am not an export in that area I am seeking some directions on how to fix this issue.