On 30 June 2015 at 00:26, Vikas MANOCHA vikas.manocha@st.com wrote:
Hi Jagan,
-----Original Message----- From: Jagan Teki [mailto:jteki@openedev.com] Sent: Monday, June 29, 2015 11:15 AM To: Vikas MANOCHA Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi flash
On 29 June 2015 at 23:14, Vikas MANOCHA vikas.manocha@st.com wrote:
Thanks Jagan,
-----Original Message----- From: Jagan Teki [mailto:jteki@openedev.com] Sent: Sunday, June 28, 2015 3:57 AM To: Vikas MANOCHA Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] [v2 0/6] stv0991: enable cadence qspi controller & spi flash
On 25 June 2015 at 04:36, Vikas Manocha vikas.manocha@st.com
wrote:
This patchset enables cadence qspi controller for stv0991 soc, saves environment in spi flash & moves CONFIG_OF in the defconfig
file.
In fact it clubs two patchsets submitted earlier:
- [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash
- [PATCH 0/3] stv0991: spi env & configs related board changes
I'm OK, with this series and commented about v2, 6/6
Please rebase all these 6 patches
Ok, I will rebase these 6 on u-boot-spi/next-dev, add doc as per your v2,
6/6 comment & send the v3.
- 3 patches on to u-boot-spi/next-dev [1]
[PATCH v2 0/3] spi: cadence_qspi: sram depth from DT & fix for FIFO
I checked these 3 patches & can be applied to spi-next-dev without any
modification.
I wasn't able to apply these 3 at-lest - please rebase all 9 against this branch and send.
You are right, I will rebase these 3 also & send the v3 for them. Also about your comment on stv0991 patchset v2, 6/6 of adding binding doc : It is more relevant for the cadence_qspi. Do you mind if I add this binding document as 4th patch in this patchset ?
Sure, send them all at once.
So send all 9 patches with fix on v2, 6/6 at once.
[1] http://git.denx.de/?p=u-boot/u-boot- spi.git;a=shortlog;h=refs/heads/next-dev
Changed in v2:
- remove checkpatch.pl error from patch "stv0991: configure clock..."
- clubbed two patchsets mentioned above.
Vikas Manocha (6): stv0991: enable saving enrironment in spi flash stv0991: move OF_CONTROL config to defconfig stv0991: remove define CONFIG_OF_SEPARATE from board file stv0991: configure clock & pad muxing for qspi stv0991: enable cadence qspi controller & spi flash stv0991: configure device tree for cadence qspi & flash
arch/arm/cpu/armv7/stv0991/clock.c | 4 ++- arch/arm/cpu/armv7/stv0991/pinmux.c | 5 +++ arch/arm/dts/stv0991.dts | 34 ++++++++++++++++++++ arch/arm/include/asm/arch-stv0991/stv0991_cgu.h | 15 +++++++++ arch/arm/include/asm/arch-stv0991/stv0991_creg.h | 9 ++++++ arch/arm/include/asm/arch-stv0991/stv0991_periph.h | 2 ++ board/st/stv0991/stv0991.c | 8 +++++ configs/stv0991_defconfig | 1 + include/configs/stv0991.h | 25 +++++++++++--- 9 files changed, 98 insertions(+), 5 deletions(-)
thanks!