On Mon, 2015-06-01 at 17:01 +0200, Hans de Goede wrote:
The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using the same defconfig (and dts on the kernel side) for both models. Unfortunately this does not work for the otg controller, on the M9 this is routed to a micro-usb connector on the outside, while as on the A1000G-quad it is connected to an usb to sata bridge.
This commit adds a new defconfig for the Mele-A1000G-quad to allow using different otg controller settings on the 2 boards.
Signed-off-by: Hans de Goede hdegoede@redhat.com diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig new file mode 100644 index 0000000..b93dcf5 --- /dev/null +++ b/configs/Mele_A1000G_quad_defconfig @@ -0,0 +1,24 @@ +# The Mele A1000G quad is yet another Allwinnner based Android top set box +# from Mele. +# +# It uses the same case as the original Mele A1000 and the same PCB as the M9, +# the USM sata storage slot is connected via anusb to sata bridge connected to +# the otg controller, this renders the micro USB B receptacle non functional. +# +# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out, +# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif, +# RTL R8188EU (USB) wifi and a full size sdcard slot
Have you seen the thread "Clean all defconfigs with savedefconfig" which we were copied on today? It seems that these comments are subject to automated cleansing :-/
So we should put them somewhere else. Tom says there "in a README somewhere".
Apart from that and assuming this matches the Linux patch you copied me on and _that_ gets accepted:
Acked-by: Ian Campbell ijc@hellion.org.uk
Ian.