
Hi Hans,
On 30 April 2015 at 08:35, Hans de Goede hdegoede@redhat.com wrote:
Convert sunxi-boards which use the sunxi-ehci code to the driver-model.
Signed-off-by: Hans de Goede hdegoede@redhat.com
board/sunxi/Kconfig | 3 ++ drivers/usb/host/ehci-sunxi.c | 95 ++++++++++++++++++++++++++++++------------- 2 files changed, 69 insertions(+), 29 deletions(-)
A few nits, but otherwise:
Acked-by: Simon Glass sjg@chromium.org
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 18e5561..6dcbff3 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -559,4 +559,7 @@ config DM_ETH config DM_SERIAL default y
+config DM_USB
default y if !USB_MUSB_SUNXI
endif diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c index 0edb643..9c6703c 100644 --- a/drivers/usb/host/ehci-sunxi.c +++ b/drivers/usb/host/ehci-sunxi.c @@ -14,53 +14,90 @@ #include <asm/arch/clock.h> #include <asm/arch/usb_phy.h> #include <asm/io.h> +#include <dm.h> #include "ehci.h"
-int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
struct ehci_hcor **hcor)
+struct ehci_sunxi_priv {
struct ehci_ctrl ehci;
Comment for these two: ?
int ahb_gate_mask;
int phy_index;
+};
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev) +{
return 0;
Maybe can drop this function if not used? Or do you plan to use it later?
+}
+static int ehci_usb_probe(struct udevice *dev) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int ahb_gate_offset;
struct usb_platdata *plat = dev_get_platdata(dev);
struct ehci_sunxi_priv *priv = dev_get_priv(dev);
struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
struct ehci_hcor *hcor;
if (hccr == (void *)SUNXI_USB1_BASE) {
priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
priv->phy_index = 1;
} else {
priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1;
priv->phy_index = 2;
}
ahb_gate_offset = index ? AHB_GATE_OFFSET_USB_EHCI1 :
AHB_GATE_OFFSET_USB_EHCI0;
setbits_le32(&ccm->ahb_gate0, 1 << ahb_gate_offset);
setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
#ifdef CONFIG_SUNXI_GEN_SUN6I
setbits_le32(&ccm->ahb_reset0_cfg, 1 << ahb_gate_offset);
setbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
#endif
sunxi_usb_phy_init(index + 1);
sunxi_usb_phy_power_on(index + 1);
sunxi_usb_phy_init(priv->phy_index);
sunxi_usb_phy_power_on(priv->phy_index);
if (index == 0)
*hccr = (void *)SUNXI_USB1_BASE;
else
*hccr = (void *)SUNXI_USB2_BASE;
hcor = (struct ehci_hcor *)((uint32_t)hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
debug("sunxi-ehci: init hccr %x and hcor %x hc_length %d\n",
(uint32_t)*hccr, (uint32_t)*hcor,
(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
return 0;
return ehci_register(dev, hccr, hcor, NULL, 0, plat->init_type);
}
-int ehci_hcd_stop(int index) +static int ehci_usb_remove(struct udevice *dev) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int ahb_gate_offset;
struct ehci_sunxi_priv *priv = dev_get_priv(dev);
int ret;
sunxi_usb_phy_power_off(index + 1);
sunxi_usb_phy_exit(index + 1);
ret = ehci_deregister(dev);
if (ret)
return ret;
sunxi_usb_phy_power_off(priv->phy_index);
sunxi_usb_phy_exit(priv->phy_index);
ahb_gate_offset = index ? AHB_GATE_OFFSET_USB_EHCI1 :
AHB_GATE_OFFSET_USB_EHCI0;
#ifdef CONFIG_SUNXI_GEN_SUN6I
clrbits_le32(&ccm->ahb_reset0_cfg, 1 << ahb_gate_offset);
clrbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
#endif
clrbits_le32(&ccm->ahb_gate0, 1 << ahb_gate_offset);
clrbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask); return 0;
}
+static const struct udevice_id ehci_usb_ids[] = {
{ .compatible = "allwinner,sun4i-a10-ehci", },
{ .compatible = "allwinner,sun5i-a13-ehci", },
{ .compatible = "allwinner,sun6i-a31-ehci", },
{ .compatible = "allwinner,sun7i-a20-ehci", },
{ .compatible = "allwinner,sun8i-a23-ehci", },
{ .compatible = "allwinner,sun9i-a80-ehci", },
{ }
+};
+U_BOOT_DRIVER(usb_ehci) = {
.name = "ehci_sunxi",
.id = UCLASS_USB,
.of_match = ehci_usb_ids,
.ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
.probe = ehci_usb_probe,
.remove = ehci_usb_remove,
.ops = &ehci_usb_ops,
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
.priv_auto_alloc_size = sizeof(struct ehci_sunxi_priv),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
2.3.6
Regards, Simon