On 16/02/24 02:14, Andrew Halaney wrote:
On Fri, Jan 19, 2024 at 11:20:43PM +0530, Apurva Nandan wrote:
TI K3 J784S4 and AM69 are new additions to the K3 SoC family. Add documentation about the J784S4 EVM and AM69 SK.
Signed-off-by: Dasnavis Sabiyasabiya.d@ti.com Signed-off-by: Apurva Nandana-nandan@ti.com
board/ti/j784s4/MAINTAINERS | 1 + doc/board/ti/j784s4_evm.rst | 299 ++++++++++++++++++++++++++++++++++++ doc/board/ti/k3.rst | 1 + 3 files changed, 301 insertions(+) create mode 100644 doc/board/ti/j784s4_evm.rst
<snip>
+Switch Setting for Boot Mode +----------------------------
+Boot Mode pins provide means to select the boot mode and options before the +device is powered up. After every POR, they are the main source to populate +the Boot Parameter Tables.
+Boot Mode Pins for J784S4-EVM +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+The following tables show some common boot modes used on J784S4 EVM platform. +More details can be found in the Technical Reference Manual: +http://www.ti.com/lit/zip/spruj52 under the `Boot Mode Pins` section.
+.. list-table:: J784S4 EVM Boot Modes
- :widths: 16 16 16
- :header-rows: 1
- Switch Label
- SW9: 12345678- SW8: 12345678According to spruj62 I think SW9 and SW8 are supposed to be SW7 and SW11 respectively?
- SD
- 00000000- 10000010
- EMMC
- 01000000- 10000000
- OSPI
- 01000000- 00000110
- UART
- 01110000- 00000000+For SW8 and SW9, the switch state in the "ON" position = 1.
Referencing more from spruj62...
SW8 is a push button for a user defined interrupt for wake up (I think), and SW9 is the main domain warm reset push button.
I'm not sure either of those are what you're trying to highlight here.
Thanks for highlighting, I will fix it.
Love the TI documentation by the way, it is very nice.
Great to hear, that you found it useful :)
Thanks, Andrew