From: Steffen Dirkwinkel s.dirkwinkel@beckhoff.com
These mmc functions were not used anymore since DM_MMC was introduced.
Acked-by: Patrick Bruenn p.bruenn@beckhoff.com Signed-off-by: Steffen Dirkwinkel s.dirkwinkel@beckhoff.com ---
board/beckhoff/mx53cx9020/mx53cx9020.c | 55 -------------------------- 1 file changed, 55 deletions(-)
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c index fdef4477d9a..de1d85f1518 100644 --- a/board/beckhoff/mx53cx9020/mx53cx9020.c +++ b/board/beckhoff/mx53cx9020/mx53cx9020.c @@ -9,7 +9,6 @@
#include <common.h> #include <dm.h> -#include <asm/io.h> #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> @@ -20,11 +19,8 @@ #include <ACEX1K.h> #include <netdev.h> #include <i2c.h> -#include <mmc.h> -#include <fsl_esdhc.h> #include <asm/gpio.h> #include <input.h> -#include <fs.h> #include <dm/platform_data/serial_mxc.h>
enum LED_GPIOS { @@ -148,57 +144,6 @@ int board_ehci_hcd_init(int port) } #endif
-#ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR}, - {MMC_SDHC2_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret; - - gpio_request(GPIO_SD1_CD, "GPIO_SD1_CD"); - gpio_request(GPIO_SD2_CD, "GPIO_SD2_CD"); - gpio_direction_input(GPIO_SD1_CD); - gpio_direction_input(GPIO_SD2_CD); - - if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - ret = !gpio_get_value(GPIO_SD1_CD); - else - ret = !gpio_get_value(GPIO_SD2_CD); - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - u32 index; - int ret; - - esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - - for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { - switch (index) { - case 0: - break; - case 1: - break; - default: - printf("Warning: you configured more ESDHC controller(%d) as supported by the board(2)\n", - CONFIG_SYS_FSL_ESDHC_NUM); - return -EINVAL; - } - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]); - if (ret) - return ret; - } - - return 0; -} -#endif
static int power_init(void) {