Thank you very much for your answer!
Which flash driver are you using? Can you erase / program the flash using a JTAG debugger?
I am using a precompiled u-boot image from the board's vendor (Toradex AG.). Where can I check the type of the selected flash driver? I have downloaded the u-boot image to the board via jtag (jflash utility), so it is working. I have some interesting thing in the u-boot output: Bank # 1: INTEL 28F128J3A Size: 32 MB in 128 Sectors
On the board I have two flash chips (2x16MB) of the type 28F128J3C150. Is it OK? I think I had to see two bank of 16MB each.
Best regards,
Áron Takács
Best regards,
Wolfgang Denk
-- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Horses just naturally have mohawk haircuts.
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_idv37&alloc_id%16865&op=Click _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users