On Sun, 11 Jul 2021 09:46:19 +0900 Masami Hiramatsu masami.hiramatsu@linaro.org wrote:
Add partition information to the spi-nor flash. This is required for accessing NOR flash via mtdparts.
Signed-off-by: Masami Hiramatsu masami.hiramatsu@linaro.org
Changes in v2:
- Add new lines to separate the partitions.
.../dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 49 ++++++++++++++++++++ 1 file changed, 49 insertions(+)
diff --git a/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi b/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi index 2f13a42235..7a56116d6f 100644 --- a/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi +++ b/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi @@ -31,6 +31,55 @@ spi-max-frequency = <31250000>; spi-rx-bus-width = <0x1>; spi-tx-bus-width = <0x1>;
partitions {compatible = "fixed-partitions";#address-cells = <1>;#size-cells = <1>;partition@0 {label = "BootStrap-BL1";reg = <0x0 0x70000>;read-only;};partition@70000 {label = "Flash-Writer";reg = <0x70000 0x90000>;read-only;};partition@100000 {label = "SCP-BL2";reg = <0x100000 0x80000>;read-only;};partition@180000 {label = "FIP-TFA";reg = <0x180000 0x78000>;};partition@1f8000 {label = "Stage2Tables";reg = <0x1f8000 0x8000>;};partition@200000 {label = "U-Boot";reg = <0x200000 0x100000>;};partition@300000 {label = "UBoot-Env";reg = <0x300000 0x100000>;};partition@500000 {label = "Ex-OPTEE";reg = <0x500000 0x200000>;};};
Reviewed-by: Marek Behún marek.behun@nic.cz