26 Jan
2017
26 Jan
'17
6:41 p.m.
On Thu, Jan 26, 2017 at 03:07:26PM +0200, Roger Quadros wrote:
Use the same convention that was used for ICSS1 Ethernet
- If pin is output, set as PIN_OUTPUT
- If pin is input and external pull resistor present set as PIN_INPUT
- If pin is input and external pull resistor absent, set pull to same
as that of the external PHY's internall pull.
Signed-off-by: Roger Quadros rogerq@ti.com
Reviewed-by: Tom Rini trini@konsulko.com
--
Tom