[ fsl_esdhc commit b1ba1460a445bcc67972a617625d0349e4f22b31 ]
Use the dma_{map,unmap}_single() calls. These will take care of the flushing and invalidation of caches.
Signed-off-by: Michael Walle michael@walle.cc Signed-off-by: Sean Anderson sean.anderson@seco.com Reviewed-by: Jaehoon Chung jh80.chung@samsung.com ---
(no changes since v1)
drivers/mmc/fsl_esdhc_imx.c | 50 +++++++++++-------------------------- 1 file changed, 15 insertions(+), 35 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index 84df131c9f..283af35a81 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -38,6 +38,7 @@ #include <mapmem.h> #include <dm/ofnode.h> #include <linux/iopoll.h> +#include <linux/dma-mapping.h>
#ifndef ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE #ifdef CONFIG_FSL_USDHC @@ -171,6 +172,7 @@ struct fsl_esdhc_priv { struct gpio_desc cd_gpio; struct gpio_desc wp_gpio; #endif + dma_addr_t dma_addr; };
/* Return the XFERTYP flags for a given command and data packet */ @@ -281,8 +283,8 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, struct mmc_data *data) { int timeout; + uint trans_bytes = data->blocksize * data->blocks; struct fsl_esdhc *regs = priv->esdhc_regs; - dma_addr_t addr; uint wml_value;
wml_value = data->blocksize/4; @@ -293,17 +295,13 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value); #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO - addr = virt_to_phys((void *)(data->dest)); - if (upper_32_bits(addr)) + priv->dma_addr = dma_map_single(data->dest, trans_bytes, + mmc_get_dma_dir(data)); + if (upper_32_bits(priv->dma_addr)) printf("Cannot use 64 bit addresses with SDMA\n"); - esdhc_write32(®s->dsaddr, lower_32_bits(addr)); + esdhc_write32(®s->dsaddr, lower_32_bits(priv->dma_addr)); #endif } else { -#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO - flush_dcache_range((ulong)data->src, - (ulong)data->src+data->blocks - *data->blocksize); -#endif if (wml_value > WML_WR_WML_MAX) wml_value = WML_WR_WML_MAX_VAL; if (priv->wp_enable) { @@ -325,10 +323,11 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK, wml_value << 16); #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO - addr = virt_to_phys((void *)(data->src)); - if (upper_32_bits(addr)) + priv->dma_addr = dma_map_single((void *)data->src, trans_bytes, + mmc_get_dma_dir(data)); + if (upper_32_bits(priv->dma_addr)) printf("Cannot use 64 bit addresses with SDMA\n"); - esdhc_write32(®s->dsaddr, lower_32_bits(addr)); + esdhc_write32(®s->dsaddr, lower_32_bits(priv->dma_addr)); #endif }
@@ -378,23 +377,6 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, return 0; }
-static void check_and_invalidate_dcache_range - (struct mmc_cmd *cmd, - struct mmc_data *data) { - unsigned start = 0; - unsigned end = 0; - unsigned size = roundup(ARCH_DMA_MINALIGN, - data->blocks*data->blocksize); - dma_addr_t addr; - - addr = virt_to_phys((void *)(data->dest)); - if (upper_32_bits(addr)) - printf("Cannot use 64 bit addresses with SDMA\n"); - start = lower_32_bits(addr); - end = start + size; - invalidate_dcache_range(start, end); -} - #ifdef CONFIG_MCF5441x /* * Swaps 32-bit words to little-endian byte order. @@ -450,9 +432,6 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc, err = esdhc_setup_data(priv, mmc, data); if(err) return err; - - if (data->flags & MMC_DATA_READ) - check_and_invalidate_dcache_range(cmd, data); }
/* Figure out the transfer arguments */ @@ -560,12 +539,13 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc, * cache-fill during the DMA operations such as the * speculative pre-fetching etc. */ - if (data->flags & MMC_DATA_READ) { - check_and_invalidate_dcache_range(cmd, data); + dma_unmap_single(priv->dma_addr, + data->blocks * data->blocksize, + mmc_get_dma_dir(data)); #ifdef CONFIG_MCF5441x + if (data->flags & MMC_DATA_READ) sd_swap_dma_buff(data); #endif - } #endif }