Add gpio command to defconfig - this can be used to detect whether the button is pressed or light LEDs. Add DS1307 RTC driver and the date command. Add CONFIG_WATCHDOG, so that U-Boot calls watchdog_reset. Add CONFIG_MISC_INIT_R so that ethernet addresses are read from OTP before network controller is initialized.
Signed-off-by: Marek Behún marek.behun@nic.cz Reviewed-by: Stefan Roese sr@denx.de --- configs/turris_mox_defconfig | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig index 749ed31acd..e89e6617ca 100644 --- a/configs/turris_mox_defconfig +++ b/configs/turris_mox_defconfig @@ -13,7 +13,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_EARLY_INIT_R=y +CONFIG_MISC_INIT_R=y CONFIG_CMD_CLK=y +CONFIG_CMD_GPIO=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -24,6 +26,7 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_CACHE=y +CONFIG_CMD_DATE=y CONFIG_CMD_TIME=y CONFIG_CMD_MVEBU_BUBT=y CONFIG_CMD_BTRFS=y @@ -63,6 +66,8 @@ CONFIG_DEBUG_UART_SHIFT=2 CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_MVEBU_A3700_UART=y CONFIG_MVEBU_A3700_SPI=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y @@ -73,6 +78,7 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_WATCHDOG=y CONFIG_WDT=y CONFIG_WDT_ARMADA_37XX=y CONFIG_SHA1=y