Don,
Please ask u-boot questions on the u-boot mailing list.
On 22/07/11 01:03, Don McCune wrote:
We are bringing up a board based on the OMAPL137 processor. The board is similar to the Spectrum Digital Evm board; however it has used UART2 for something else, so we need to make UAR1 the console line for u-boot. Could you tell us how to modify u-boot to use UART1 for its console?
$ grep UART include/configs/da830evm.h #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */
Just change DAVINCI_UART2_BASE to DAVINCI_UART1_BASE.
(and make sure your boot loader enables the pinmux for UART1)
Please reply-to-all with any questions or answers. If you wish to contact us directly, please call Tim Orling at 805 269 0767.
Thank you.
Regards,
Don McCune
Nick.