In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time.
Signed-off-by: Ioana Ciornei ioana.ciornei@nxp.com --- board/freescale/lx2160a/eth_lx2160aqds.c | 12 +++++++++++- board/freescale/lx2160a/lx2160a.c | 5 +++++ 2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/board/freescale/lx2160a/eth_lx2160aqds.c b/board/freescale/lx2160a/eth_lx2160aqds.c index 0e928ebd8689..3b7830343d1e 100644 --- a/board/freescale/lx2160a/eth_lx2160aqds.c +++ b/board/freescale/lx2160a/eth_lx2160aqds.c @@ -25,6 +25,7 @@
DECLARE_GLOBAL_DATA_PTR;
+#ifndef CONFIG_DM_ETH #define EMI_NONE 0 #define EMI1 1 /* Mdio Bus 1 */ #define EMI2 2 /* Mdio Bus 2 */ @@ -439,9 +440,11 @@ static inline void do_dpmac_config(int dpmac, const char *arg_dpmacid, }
#endif +#endif /* !CONFIG_DM_ETH */
int board_eth_init(bd_t *bis) { +#ifndef CONFIG_DM_ETH #if defined(CONFIG_FSL_MC_ENET) struct memac_mdio_info mdio_info; struct memac_mdio_controller *regs; @@ -564,6 +567,7 @@ int board_eth_init(bd_t *bis)
cpu_eth_init(bis); #endif /* CONFIG_FMAN_ENET */ +#endif /* !CONFIG_DM_ETH */
#ifdef CONFIG_PHY_AQUANTIA /* @@ -577,7 +581,12 @@ int board_eth_init(bd_t *bis) gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname; gd->jt->miiphy_set_current_dev = miiphy_set_current_dev; #endif + +#ifdef CONFIG_DM_ETH + return 0; +#else return pci_eth_init(bis); +#endif }
#if defined(CONFIG_RESET_PHY_R) @@ -589,6 +598,7 @@ void reset_phy(void) } #endif /* CONFIG_RESET_PHY_R */
+#ifndef CONFIG_DM_ETH #if defined(CONFIG_FSL_MC_ENET) int fdt_fixup_dpmac_phy_handle(void *fdt, int dpmac_id, int node_phandle) { @@ -837,4 +847,4 @@ int fdt_fixup_board_phy(void *fdt) return ret; } #endif // CONFIG_FSL_MC_ENET - +#endif diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 23ea1b6f16aa..abfbc9188392 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -587,6 +587,9 @@ int board_init(void) sec_init(); #endif
+#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) + pci_init(); +#endif return 0; }
@@ -632,7 +635,9 @@ void fdt_fixup_board_enet(void *fdt) if (get_mc_boot_status() == 0 && (is_lazy_dpl_addr_valid() || get_dpl_apply_status() == 0)) { fdt_status_okay(fdt, offset); +#ifndef CONFIG_DM_ETH fdt_fixup_board_phy(fdt); +#endif } else { fdt_status_fail(fdt, offset); }