On Thursday 14 May 2009 16:59:51 Wolfgang Denk wrote:
If my understanding is correct, then this is a bug on your hardware.
I don't think so.
I do, because what we see on other hardware looks different:
For example:
U-Boot 1.3.2-rc2-g02e4b4e3 (Feb 28 2008 - 16:46:26)
^^^^^^^^^^^^^
That's very old.
... IDE: Bus 0: ..OK Device 0: Model: HITACHI_DK23DA-20 Firm: 00J2A0A1 Ser#: 12Y0MN Type: Hard Disk Capacity: 19077.1 MB = 18.6 GB (39070080 x 512) Device 1: not available SRAM: 512 kB ...
If your board probes for a non-existing Device 1 and tries to print Model and Firmware versions, then there must be something wrong...
From my understanding this worked at some point on the CPCI750 as well. Perhaps you could give the TOT U-Boot version a try on your board used above. My guess is that this will fail as well.
I tried to locate a problem that was introduced at some time but couldn't locate it (no, I didn't use git bisect). But looking at the current code this just can't work as is for the 2nd drive. And I still think my fix is ok.
Thanks.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================