Sorry for submitting of this patch. I proposed here similar to the http://lists.denx.de/pipermail/u-boot/2010-January/067259.html patch solution about which I was not aware. The only difference is that I also added CONFIG_NETCONSOLE conditional compilation for the cases when no netconsole is used at all.
On Mon, Feb 15, 2010 at 11:40 AM, Michael Zaidman michael.zaidman@gmail.com wrote:
The problem description: The Ethernet link operation mode printing (such as "Speed: 1000, full duplex") accomplishes every key typing when communicating via netconsole to the mpc834x based board. The string is printed by adjust_link() routine of tsec.c, which in turn is part of the eth_init routine called at every netloop entry.
The solution: Do not print the string when compiled with CONFIG_NETCONSOLE and stdin or stdout is set to "nc"
Signed-off-by: Michael Zaidman michael.zaidman@gmail.com
drivers/net/tsec.c | 10 ++++++---- 1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 3f74118..87093e6 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -847,10 +847,12 @@ static void adjust_link(struct eth_device *dev) printf("%s: Speed was bad\n", dev->name); break; }
- printf("Speed: %d, %s duplex\n", priv->speed,
- (priv->duplexity) ? "full" : "half");
+#ifdef CONFIG_NETCONSOLE
- if ((strcmp(getenv("stdin"),"nc") != 0) &&
- (strcmp(getenv("stdout"),"nc") != 0))
+#endif
- printf("Speed: %d, %s duplex\n", priv->speed,
- (priv->duplexity) ? "full" : "half");
} else { printf("%s: No link.\n", dev->name); } -- 1.6.3.3