On 03/24/2015 12:48 AM, ying.zhang@freescale.com wrote:
From: Ying Zhang b40530@freescale.com
Because the function ft_board_setup() delete the USB2 device node, it leads to can't find the device node and hung up.
In fact only P1020RDB needs to delete the USB2 node, this patch fixes this issue.
Signed-off-by: Ying Zhang b40530@freescale.com
board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 3f47cfb..0c60fc3 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -428,8 +428,10 @@ int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; +#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_P1020RDB_PC) const char *soc_usb_compat = "fsl-usb2-dr"; int err, usb1_off, usb2_off; +#endif
"err" is used elsewhere. Your change causes compiling error on these boards
P1025RDB_SDCARD P2020RDB-PC_36BIT_SPIFLASH P1021RDB-PC_36BIT_SPIFLASH P2020RDB-PC_SPIFLASH P1020MBG-PC_36BIT_SDCARD P1024RDB_SPIFLASH P1021RDB-PC_SPIFLASH P1020MBG-PC_SDCARD P2020RDB-PC_36BIT_SDCARD P1021RDB-PC_SDCARD P2020RDB-PC_SDCARD P1024RDB_SDCARD P1025RDB_SPIFLASH P1020UTM-PC_36BIT_SDCARD P1021RDB-PC_36BIT_SDCARD P1020UTM-PC_SDCARD
York