Hello Tim,
Am 28.04.2015 um 17:44 schrieb Tim Harvey:
The IMX6 has four different speed grades determined by eFUSE SPEED_GRADING (OCOTP_CFG3[17:16]).
Display this value to make it clear the difference regarding the CPU speed currently running at vs the max speed allowed per grade. Note that the power on CPU speed is determined by OCOTP_CFG4[18].
I see no indication in the IMX6SX reference manual that it has the same CPU speed grades in this OTP register.
AFAIK there is no speed grading info for i.MX6 Solo / DualLight in OTP.
Signed-off-by: Tim Harvey tharvey@gateworks.com
arch/arm/cpu/armv7/mx6/soc.c | 26 ++++++++++++++++++++++++++ arch/arm/imx-common/cpu.c | 17 +++++++++++++++++ arch/arm/include/asm/arch-mx6/sys_proto.h | 1 + arch/arm/include/asm/proc | 1 + 4 files changed, 45 insertions(+) create mode 120000 arch/arm/include/asm/proc
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index dd34138..dc422a6 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -83,6 +83,32 @@ u32 get_cpu_rev(void) return (type << 12) | (reg + 0x10); }
+#define OCOTP_CFG3_SPEED_SHIFT 16 +#define OCOTP_CFG3_SPEED_1P2GHZ 0x3 +#define OCOTP_CFG3_SPEED_996MHZ 0x2 +#define OCOTP_CFG3_SPEED_852MHZ 0x1
+u32 get_cpu_speed_grade_hz(void) +{
- struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
- struct fuse_bank *bank = &ocotp->bank[0];
- struct fuse_bank0_regs *fuse =
(struct fuse_bank0_regs *)bank->fuse_regs;- uint32_t val;
- val = readl(&fuse->cfg3);
- val >>= OCOTP_CFG3_SPEED_SHIFT;
- val &= 0x3;
- if (val == OCOTP_CFG3_SPEED_1P2GHZ)
return 1200000000;- if (val == OCOTP_CFG3_SPEED_996MHZ)
return 996000000;- if (val == OCOTP_CFG3_SPEED_852MHZ)
return 852000000;- return 792000000;
+}
#ifdef CONFIG_REVISION_TAG u32 __weak get_board_rev(void) { diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 067d08f..ead7f08 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -151,11 +151,28 @@ int print_cpuinfo(void)
cpurev = get_cpu_rev();
+#if defined(CONFIG_MX6)
- printf("CPU: Freescale i.MX%s rev%d.%d",
get_imx_type((cpurev & 0xFF000) >> 12),(cpurev & 0x000F0) >> 4,(cpurev & 0x0000F) >> 0);- if (is_cpu_type(MXC_CPU_MX6SX))
printf(" at %d MHz", mxc_get_clock(MXC_ARM_CLK) / 1000000);- else {
printf(" %d MHz", get_cpu_speed_grade_hz() / 1000000);if (get_cpu_speed_grade_hz() != mxc_get_clock(MXC_ARM_CLK)) {printf(" (at %d MHz)",mxc_get_clock(MXC_ARM_CLK) / 1000000);}- }
- puts("\n");
+#else printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n", get_imx_type((cpurev & 0xFF000) >> 12), (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0, mxc_get_clock(MXC_ARM_CLK) / 1000000); +#endif
#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev); diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index 28ba844..a2cd0a9 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -16,6 +16,7 @@
u32 get_nr_cpus(void); u32 get_cpu_rev(void); +u32 get_cpu_speed_grade_hz(void);
/* returns MXC_CPU_ value */ #define cpu_type(rev) (((rev) >> 12)&0xff) diff --git a/arch/arm/include/asm/proc b/arch/arm/include/asm/proc new file mode 120000 index 0000000..c7f3c20 --- /dev/null +++ b/arch/arm/include/asm/proc @@ -0,0 +1 @@ +proc-armv \ No newline at end of file