Re: [U-Boot] [PATCH] mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT

On 22/07/2016 20:21, Fabio Estevam wrote:

There is no need for introducing MX7_SEC, as there is the CONFIG_ARMV7_BOOT_SEC_DEFAULT option for this purpose.

Switch to CONFIG_ARMV7_BOOT_SEC_DEFAULT and get rid of MX7_SEC.

Tested by booting a 4.1.15 NXP kernel with mx7dsabresd_secure_defconfig target.

Signed-off-by: Fabio Estevam fabio.estevam@nxp.com

arch/arm/imx-common/Kconfig | 9 --------- configs/mx7dsabresd_secure_defconfig | 2 +- 2 files changed, 1 insertion(+), 10 deletions(-)

diff --git a/arch/arm/imx-common/Kconfig b/arch/arm/imx-common/Kconfig index c6b38bc..1b7da5a 100644 --- a/arch/arm/imx-common/Kconfig +++ b/arch/arm/imx-common/Kconfig @@ -17,12 +17,3 @@ config IMX_BOOTAUX depends on ARCH_MX7 || ARCH_MX6 help bootaux [addr] to boot auxiliary core.

-config MX7_SEC

• bool "Support booting MX7 in secure mode"
• depends on ARCH_MX7
• help

•  NXP kernel requires to boot MX7 in secure mode. Select
  

•  this options if you want to boot a NXP kernel. In order
  

•  to boot a mainline kernel this option needs to be
  

•  unselected.
  

diff --git a/configs/mx7dsabresd_secure_defconfig b/configs/mx7dsabresd_secure_defconfig index 0a3930e..aa92a38 100644 --- a/configs/mx7dsabresd_secure_defconfig +++ b/configs/mx7dsabresd_secure_defconfig @@ -38,4 +38,4 @@ CONFIG_G_DNL_MANUFACTURER="FSL" CONFIG_G_DNL_VENDOR_NUM=0x0525 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 CONFIG_OF_LIBFDT=y -CONFIG_MX7_SEC=y +CONFIG_ARMV7_BOOT_SEC_DEFAULT=y

Applied to u-boot-imx, thanks !

Best regards, Stefano Babic