Use prompt instead of code-block to have copy-paste friendly command documentation.
Signed-off-by: Nishanth Menon nm@ti.com --- Changes since v1: minor fixup for whitespace indentation.
V1: https://lore.kernel.org/r/20231103000915.2413501-4-nm@ti.com doc/board/ti/am62x_beagleplay.rst | 46 ++++++------- doc/board/ti/am62x_sk.rst | 18 +++--- doc/board/ti/am64x_evm.rst | 20 +++--- doc/board/ti/am65x_evm.rst | 104 +++++++++++++++--------------- doc/board/ti/j7200_evm.rst | 20 +++--- doc/board/ti/j721e_evm.rst | 40 ++++++------ doc/board/ti/j721s2_evm.rst | 18 +++--- 7 files changed, 133 insertions(+), 133 deletions(-)
diff --git a/doc/board/ti/am62x_beagleplay.rst b/doc/board/ti/am62x_beagleplay.rst index 39913b29ab2c..97ab0a4350ed 100644 --- a/doc/board/ti/am62x_beagleplay.rst +++ b/doc/board/ti/am62x_beagleplay.rst @@ -55,15 +55,15 @@ Set the variables corresponding to this platform: .. include:: k3.rst :start-after: .. k3_rst_include_start_common_env_vars_defn :end-before: .. k3_rst_include_end_common_env_vars_defn -.. code-block:: bash +.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR="am62x_evm_r5_defconfig beagleplay_r5.config" - $ export UBOOT_CFG_CORTEXA="am62x_evm_a53_defconfig beagleplay_a53.config" - $ export TFA_BOARD=lite - $ # we dont use any extra TFA parameters - $ unset TFA_EXTRA_ARGS - $ export OPTEE_PLATFORM=k3-am62x - $ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y" + export UBOOT_CFG_CORTEXR="am62x_evm_r5_defconfig beagleplay_r5.config" + export UBOOT_CFG_CORTEXA="am62x_evm_a53_defconfig beagleplay_a53.config" + export TFA_BOARD=lite + # we dont use any extra TFA parameters + unset TFA_EXTRA_ARGS + export OPTEE_PLATFORM=k3-am62x + export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
.. include:: am62x_sk.rst :start-after: .. am62x_evm_rst_include_start_build_steps @@ -174,24 +174,24 @@ boot1 partition depends on A/B update requirements.
The following are the steps from Linux shell to program eMMC:
-.. code-block:: bash +.. prompt:: bash #
- # # Enable Boot0 boot - # mmc bootpart enable 1 2 /dev/mmcblk0 - # mmc bootbus set single_backward x1 x8 /dev/mmcblk0 - # mmc hwreset enable /dev/mmcblk0 + # Enable Boot0 boot + mmc bootpart enable 1 2 /dev/mmcblk0 + mmc bootbus set single_backward x1 x8 /dev/mmcblk0 + mmc hwreset enable /dev/mmcblk0
- # # Clear eMMC boot0 - # echo '0' >> /sys/class/block/mmcblk0boot0/force_ro - # dd if=/dev/zero of=/dev/mmcblk0boot0 count=32 bs=128k - # # Write tiboot3.bin - # dd if=tiboot3.bin of=/dev/mmcblk0boot0 bs=128k + # Clear eMMC boot0 + echo '0' >> /sys/class/block/mmcblk0boot0/force_ro + dd if=/dev/zero of=/dev/mmcblk0boot0 count=32 bs=128k + # Write tiboot3.bin + dd if=tiboot3.bin of=/dev/mmcblk0boot0 bs=128k
- # # Copy the rest of the boot binaries - # mount /dev/mmcblk0p1 /boot/firmware - # cp tispl.bin /boot/firmware - # cp u-boot.img /boot/firmware - # sync + # Copy the rest of the boot binaries + mount /dev/mmcblk0p1 /boot/firmware + cp tispl.bin /boot/firmware + cp u-boot.img /boot/firmware + sync
.. warning ::
diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst index d7437c6d22f7..25e25fb56ac4 100644 --- a/doc/board/ti/am62x_sk.rst +++ b/doc/board/ti/am62x_sk.rst @@ -76,15 +76,15 @@ Set the variables corresponding to this platform: .. include:: ../ti/k3.rst :start-after: .. k3_rst_include_start_common_env_vars_defn :end-before: .. k3_rst_include_end_common_env_vars_defn -.. code-block:: bash +.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=am62x_evm_r5_defconfig - $ export UBOOT_CFG_CORTEXA=am62x_evm_a53_defconfig - $ export TFA_BOARD=lite - $ # we dont use any extra TFA parameters - $ unset TFA_EXTRA_ARGS - $ export OPTEE_PLATFORM=k3-am62x - $ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y" + export UBOOT_CFG_CORTEXR=am62x_evm_r5_defconfig + export UBOOT_CFG_CORTEXA=am62x_evm_a53_defconfig + export TFA_BOARD=lite + # we dont use any extra TFA parameters + unset TFA_EXTRA_ARGS + export OPTEE_PLATFORM=k3-am62x + export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
.. am62x_evm_rst_include_start_build_steps
@@ -270,6 +270,6 @@ detailed setup information.
To start OpenOCD and connect to the board
-.. code-block:: bash +.. prompt:: bash $
openocd -f board/ti_am625evm.cfg diff --git a/doc/board/ti/am64x_evm.rst b/doc/board/ti/am64x_evm.rst index db27461cb14d..fe661b1f49c8 100644 --- a/doc/board/ti/am64x_evm.rst +++ b/doc/board/ti/am64x_evm.rst @@ -65,16 +65,16 @@ Set the variables corresponding to this platform: .. include:: k3.rst :start-after: .. k3_rst_include_start_common_env_vars_defn :end-before: .. k3_rst_include_end_common_env_vars_defn -.. code-block:: bash - - $ export UBOOT_CFG_CORTEXR=am64x_evm_r5_defconfig - $ export UBOOT_CFG_CORTEXA=am64x_evm_a53_defconfig - $ export TFA_BOARD=lite - $ # we dont use any extra TFA parameters - $ unset TFA_EXTRA_ARGS - $ export OPTEE_PLATFORM=k3-am64x - $ # we dont use any extra TFA parameters - $ unset OPTEE_EXTRA_ARGS +.. prompt:: bash $ + + export UBOOT_CFG_CORTEXR=am64x_evm_r5_defconfig + export UBOOT_CFG_CORTEXA=am64x_evm_a53_defconfig + export TFA_BOARD=lite + # we dont use any extra TFA parameters + unset TFA_EXTRA_ARGS + export OPTEE_PLATFORM=k3-am64x + # we dont use any extra TFA parameters + unset OPTEE_EXTRA_ARGS
.. am64x_evm_rst_include_start_build_steps
diff --git a/doc/board/ti/am65x_evm.rst b/doc/board/ti/am65x_evm.rst index 7cebb1ca62d3..d8c58fad2a5e 100644 --- a/doc/board/ti/am65x_evm.rst +++ b/doc/board/ti/am65x_evm.rst @@ -75,16 +75,16 @@ Set the variables corresponding to this platform: .. include:: k3.rst :start-after: .. k3_rst_include_start_common_env_vars_defn :end-before: .. k3_rst_include_end_common_env_vars_defn -.. code-block:: bash +.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=am65x_evm_r5_defconfig - $ export UBOOT_CFG_CORTEXA=am65x_evm_a53_defconfig - $ export TFA_BOARD=generic - $ # we dont use any extra TFA parameters - $ unset TFA_EXTRA_ARGS - $ export OPTEE_PLATFORM=k3-am65x - $ # we dont use any extra OP-TEE parameters - $ unset OPTEE_EXTRA_ARGS + export UBOOT_CFG_CORTEXR=am65x_evm_r5_defconfig + export UBOOT_CFG_CORTEXA=am65x_evm_a53_defconfig + export TFA_BOARD=generic + # we dont use any extra TFA parameters + unset TFA_EXTRA_ARGS + export OPTEE_PLATFORM=k3-am65x + # we dont use any extra OP-TEE parameters + unset OPTEE_EXTRA_ARGS
.. am65x_evm_rst_include_start_build_steps
@@ -159,32 +159,32 @@ The following commands can be used to download tiboot3.bin, tispl.bin, u-boot.img, and sysfw.itb from an SD card and write them to the eMMC boot0 partition at respective addresses.
-.. code-block:: text +.. prompt:: bash =>
- => mmc dev 0 1 - => fatload mmc 1 ${loadaddr} tiboot3.bin - => mmc write ${loadaddr} 0x0 0x400 - => fatload mmc 1 ${loadaddr} tispl.bin - => mmc write ${loadaddr} 0x400 0x1000 - => fatload mmc 1 ${loadaddr} u-boot.img - => mmc write ${loadaddr} 0x1400 0x2000 - => fatload mmc 1 ${loadaddr} sysfw.itb - => mmc write ${loadaddr} 0x3600 0x800 + mmc dev 0 1 + fatload mmc 1 ${loadaddr} tiboot3.bin + mmc write ${loadaddr} 0x0 0x400 + fatload mmc 1 ${loadaddr} tispl.bin + mmc write ${loadaddr} 0x400 0x1000 + fatload mmc 1 ${loadaddr} u-boot.img + mmc write ${loadaddr} 0x1400 0x2000 + fatload mmc 1 ${loadaddr} sysfw.itb + mmc write ${loadaddr} 0x3600 0x800
To give the ROM access to the boot partition, the following commands must be used for the first time:
-.. code-block:: text +.. prompt:: bash =>
- => mmc partconf 0 1 1 1 - => mmc bootbus 0 1 0 0 + mmc partconf 0 1 1 1 + mmc bootbus 0 1 0 0
To create a software partition for the rootfs, the following command can be used:
-.. code-block:: text +.. prompt:: bash =>
- => gpt write mmc 0 ${partitions} + gpt write mmc 0 ${partitions}
eMMC layout:
@@ -194,11 +194,11 @@ eMMC layout: Kernel image and DT are expected to be present in the /boot folder of rootfs. To boot kernel from eMMC, use the following commands:
-.. code-block:: text +.. prompt:: bash =>
- => setenv mmcdev 0 - => setenv bootpart 0 - => boot + setenv mmcdev 0 + setenv bootpart 0 + boot
OSPI: ----- @@ -210,17 +210,17 @@ Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img, and sysfw.itb over tftp and then flash those to OSPI at their respective addresses.
-.. code-block:: text +.. prompt:: bash =>
- => sf probe - => tftp ${loadaddr} tiboot3.bin - => sf update $loadaddr 0x0 $filesize - => tftp ${loadaddr} tispl.bin - => sf update $loadaddr 0x80000 $filesize - => tftp ${loadaddr} u-boot.img - => sf update $loadaddr 0x280000 $filesize - => tftp ${loadaddr} sysfw.itb - => sf update $loadaddr 0x6C0000 $filesize + sf probe + tftp ${loadaddr} tiboot3.bin + sf update $loadaddr 0x0 $filesize + tftp ${loadaddr} tispl.bin + sf update $loadaddr 0x80000 $filesize + tftp ${loadaddr} u-boot.img + sf update $loadaddr 0x280000 $filesize + tftp ${loadaddr} sysfw.itb + sf update $loadaddr 0x6C0000 $filesize
Flash layout for OSPI:
@@ -233,10 +233,10 @@ ospi.rootfs just like in SD card case. U-Boot looks for UBI volume named
To boot kernel from OSPI, at the U-Boot prompt:
-.. code-block:: text +.. prompt:: bash =>
- => setenv boot ubi - => boot + setenv boot ubi + boot
UART: ----- @@ -280,19 +280,19 @@ is fully loaded (from sysfw.itb) and started. Example bash script sequence for running on a Linux host PC feeding all boot artifacts needed to the device:
-.. code-block:: text +.. prompt:: bash $
- MCU_DEV=/dev/ttyUSB1 - MAIN_DEV=/dev/ttyUSB0 + MCU_DEV=/dev/ttyUSB1 + MAIN_DEV=/dev/ttyUSB0
- stty -F $MCU_DEV 115200 cs8 -cstopb -parenb - stty -F $MAIN_DEV 115200 cs8 -cstopb -parenb + stty -F $MCU_DEV 115200 cs8 -cstopb -parenb + stty -F $MAIN_DEV 115200 cs8 -cstopb -parenb
- sb --xmodem tiboot3.bin > $MCU_DEV < $MCU_DEV - sb --ymodem sysfw.itb > $MCU_DEV < $MCU_DEV - sb --ymodem tispl.bin > $MAIN_DEV < $MAIN_DEV - sleep 1 - sb --xmodem u-boot.img > $MAIN_DEV < $MAIN_DEV + sb --xmodem tiboot3.bin > $MCU_DEV < $MCU_DEV + sb --ymodem sysfw.itb > $MCU_DEV < $MCU_DEV + sb --ymodem tispl.bin > $MAIN_DEV < $MAIN_DEV + sleep 1 + sb --xmodem u-boot.img > $MAIN_DEV < $MAIN_DEV
Debugging U-Boot ---------------- @@ -314,6 +314,6 @@ detailed setup information.
To start OpenOCD and connect to the board
-.. code-block:: bash +.. prompt:: bash $
openocd -f board/ti_am654evm.cfg diff --git a/doc/board/ti/j7200_evm.rst b/doc/board/ti/j7200_evm.rst index bcf8dc1c5f0d..f2c2e7f5db1c 100644 --- a/doc/board/ti/j7200_evm.rst +++ b/doc/board/ti/j7200_evm.rst @@ -64,16 +64,16 @@ Set the variables corresponding to this platform: .. include:: k3.rst :start-after: .. k3_rst_include_start_common_env_vars_defn :end-before: .. k3_rst_include_end_common_env_vars_defn -.. code-block:: bash +.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=j7200_evm_r5_defconfig - $ export UBOOT_CFG_CORTEXA=j7200_evm_a72_defconfig - $ export TFA_BOARD=generic - $ # we dont use any extra TFA parameters - $ unset TFA_EXTRA_ARGS - $ export OPTEE_PLATFORM=k3-j7200 - $ # we dont use any extra OP-TEE parameters - $ unset OPTEE_EXTRA_ARGS + export UBOOT_CFG_CORTEXR=j7200_evm_r5_defconfig + export UBOOT_CFG_CORTEXA=j7200_evm_a72_defconfig + export TFA_BOARD=generic + # we dont use any extra TFA parameters + unset TFA_EXTRA_ARGS + export OPTEE_PLATFORM=k3-j7200 + # we dont use any extra OP-TEE parameters + unset OPTEE_EXTRA_ARGS
.. j7200_evm_rst_include_start_build_steps
@@ -225,6 +225,6 @@ detailed setup information.
To start OpenOCD and connect to the board
-.. code-block:: bash +.. prompt:: bash $
openocd -f board/ti_j7200evm.cfg diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst index cadaac017811..344a38d37486 100644 --- a/doc/board/ti/j721e_evm.rst +++ b/doc/board/ti/j721e_evm.rst @@ -69,16 +69,16 @@ Set the variables corresponding to this platform: .. include:: k3.rst :start-after: .. k3_rst_include_start_common_env_vars_defn :end-before: .. k3_rst_include_end_common_env_vars_defn -.. code-block:: bash +.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=j721e_evm_r5_defconfig - $ export UBOOT_CFG_CORTEXA=j721e_evm_a72_defconfig - $ export TFA_BOARD=generic - $ # we dont use any extra TFA parameters - $ unset TFA_EXTRA_ARGS - $ export OPTEE_PLATFORM=k3-j721e - $ # we dont use any extra OP-TEE parameters - $ unset OPTEE_EXTRA_ARGS + export UBOOT_CFG_CORTEXR=j721e_evm_r5_defconfig + export UBOOT_CFG_CORTEXA=j721e_evm_a72_defconfig + export TFA_BOARD=generic + # we dont use any extra TFA parameters + unset TFA_EXTRA_ARGS + export OPTEE_PLATFORM=k3-j721e + # we dont use any extra OP-TEE parameters + unset OPTEE_EXTRA_ARGS
.. j721e_evm_rst_include_start_build_steps
@@ -202,17 +202,17 @@ Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img, and sysfw.itb over tftp and then flash those to OSPI at their respective addresses.
-.. code-block:: text +.. prompt:: bash =>
- => sf probe - => tftp ${loadaddr} tiboot3.bin - => sf update $loadaddr 0x0 $filesize - => tftp ${loadaddr} tispl.bin - => sf update $loadaddr 0x80000 $filesize - => tftp ${loadaddr} u-boot.img - => sf update $loadaddr 0x280000 $filesize - => tftp ${loadaddr} sysfw.itb - => sf update $loadaddr 0x6C0000 $filesize + sf probe + tftp ${loadaddr} tiboot3.bin + sf update $loadaddr 0x0 $filesize + tftp ${loadaddr} tispl.bin + sf update $loadaddr 0x80000 $filesize + tftp ${loadaddr} u-boot.img + sf update $loadaddr 0x280000 $filesize + tftp ${loadaddr} sysfw.itb + sf update $loadaddr 0x6C0000 $filesize
Flash layout for OSPI:
@@ -254,6 +254,6 @@ detailed setup information.
To start OpenOCD and connect to the board
-.. code-block:: bash +.. prompt:: bash $
openocd -f board/ti_j721eevm.cfg diff --git a/doc/board/ti/j721s2_evm.rst b/doc/board/ti/j721s2_evm.rst index fec2acabe845..6db375a125b3 100644 --- a/doc/board/ti/j721s2_evm.rst +++ b/doc/board/ti/j721s2_evm.rst @@ -75,15 +75,15 @@ Set the variables corresponding to this platform: .. include:: k3.rst :start-after: .. k3_rst_include_start_common_env_vars_defn :end-before: .. k3_rst_include_end_common_env_vars_defn -.. code-block:: bash +.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=j721s2_evm_r5_defconfig - $ export UBOOT_CFG_CORTEXA=j721s2_evm_a72_defconfig - $ export TFA_BOARD=generic - $ export TFA_EXTRA_ARGS="K3_USART=0x8" - $ # The following is not a typo, j784s4 is the OP-TEE platform for j721s2 - $ export OPTEE_PLATFORM=k3-j784s4 - $ export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8" + export UBOOT_CFG_CORTEXR=j721s2_evm_r5_defconfig + export UBOOT_CFG_CORTEXA=j721s2_evm_a72_defconfig + export TFA_BOARD=generic + export TFA_EXTRA_ARGS="K3_USART=0x8" + # The following is not a typo, j784s4 is the OP-TEE platform for j721s2 + export OPTEE_PLATFORM=k3-j784s4 + export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8"
.. j721s2_evm_rst_include_start_build_steps
@@ -296,7 +296,7 @@ Debugging U-Boot on J721S2-EVM
To start OpenOCD and connect to the board
-.. code-block:: bash +.. prompt:: bash $
openocd -f board/ti_j721s2evm.cfg