January 2025 - U-Boot

[PATCH 00/10] Rockchip VOP2 support
by Dang Huynh 22 Jan '25

22 Jan '25

This series adds VOP2 support to U-Boot and enable it for PineTab2. HDMI should work flawlessly but there's still some timings issue with DW MIPI DSI, perhaps that's something to look into later. Signed-off-by: Dang Huynh <danct12(a)riseup.net> --- Dang Huynh (8): video: rockchip: dw-mipi-dsi: Depend on CONFIG_VIDEO_BRIDGE video: Add BOE TH101MB31IG002-28A MIPI-DSI panel video: rockchip: Add VOP2 support video: rockchip: vop2: Add video bridge support dts: rockchip: rk356x: Prerelocate VOP in U-Boot proper configs: quartz64: Enable vidconsole video: rockchip: Add HDMI support for RK3568 configs: pinetab2-rk3566: Enable video and USB keyboard Ondrej Jirman (2): video: rockchip: dw_mipi_dsi: Improve pixel clock calculations video: rockchip: dw_mipi_dsi: Proceed when external PHY is not defined arch/arm/dts/rk356x-u-boot.dtsi | 4 + arch/arm/include/asm/arch-rockchip/vop_rk3568.h | 249 ++++++++++++ configs/pinetab2-rk3566_defconfig | 15 + drivers/video/Kconfig | 10 + drivers/video/Makefile | 1 + drivers/video/boe-th101mb31ig002-28a.c | 231 +++++++++++ drivers/video/rockchip/Kconfig | 2 +- drivers/video/rockchip/Makefile | 4 +- drivers/video/rockchip/dw_mipi_dsi_rockchip.c | 26 +- drivers/video/rockchip/rk3568_hdmi.c | 63 +++ drivers/video/rockchip/rk3568_vop.c | 214 ++++++++++ drivers/video/rockchip/rk_vop2.c | 519 ++++++++++++++++++++++++ drivers/video/rockchip/rk_vop2.h | 58 +++ include/configs/quartz64_rk3566.h | 5 +- 14 files changed, 1383 insertions(+), 18 deletions(-) --- base-commit: 6d41f0a39d6423c8e57e92ebbe9f8c0333a63f72 change-id: 20250114-vop2-pt2-755fb1991bb6 Best regards, -- Dang Huynh <danct12(a)riseup.net>

4 16

[PATCH 0/2] mach-snapdragon: Fix and improve /memory parsing
by Sam Day 22 Jan '25

22 Jan '25

The first commit in this series is a fix for qcom_parse_memory, which is currently broken on master (since fc37a73e6679). It's an alternative to the patch Caleb proposed a couple of days ago (20250117102734.3725009-2-caleb.connolly(a)linaro.org). This approach results in a smaller diff, and also makes it possible to do the thing introduced in the second commit. The second commit introduces the ability to boot with an internal DT that lacks a fully specified /memory node, instead obtaining that information from the FDT supplied by the previous bootloader. The first commit should ideally land even if the second one needs more rounds before it's ready. I opted to submit both commits together as one series because, as noted earlier, the way the fix is done introduces functionality that the second commit relies on (specifically: passing the pointer of the specific FDT to parse for its /memory node). I've tested both these commits together on an msm8916 device and an sdm845 device. The msm8916 device booted with an internal DT that relies on /memory in the external FDT to properly function. The sdm845 device booted with an entirely external FDT. So I reckon I hit all the various code paths in both qcom_parse_memory and board_fdt_blob_setup. Signed-off-by: Sam Day <me(a)samcday.com> --- Sam Day (2): mach-snapdragon: pass fdt to qcom_parse_memory mach-snapdragon: support parsing memory info from external FDT arch/arm/mach-snapdragon/Kconfig | 13 ++++++++ arch/arm/mach-snapdragon/board.c | 68 ++++++++++++++++++++++++++-------------- 2 files changed, 58 insertions(+), 23 deletions(-) --- base-commit: 639cd409987acf173eaffebe7876968b42fd7c32 change-id: 20250120-qcom-parse-memory-updates-96ffe248cdf1 Best regards, -- Sam Day <me(a)samcday.com>

2 5

[PATCH v2] imx8m: Guard binman nodes with CONFIG_OPTEE
by Fabio Estevam 22 Jan '25

22 Jan '25

From: Fabio Estevam <festevam(a)denx.de> Guard binman nodes with CONFIG_OPTEE to fix the following error when building without optee support: BINMAN .binman_stamp Image 'image' has faked external blobs and is non-functional: tee.bin Image 'image' is missing optional external blobs but is still functional: tee-os /binman/section/fit/images/tee/tee-os (tee.bin): See the documentation for your board. You may need to build Open Portable Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin Some images are invalid make: *** [Makefile:1135: .binman_stamp] Error 103 While at it, only pass tee to the loadables lines when CONFIG_OPTEE is defined. Reported-by: Tim Harvey <tharvey(a)gateworks.com> Signed-off-by: Fabio Estevam <festevam(a)denx.de> Reviewed-by: Tom Rini <trini(a)konsulko.com> --- Changes since v1: - Also guard the loadables line. (Tim) arch/arm/dts/imx8mm-u-boot.dtsi | 6 ++++++ arch/arm/dts/imx8mn-u-boot.dtsi | 6 ++++++ arch/arm/dts/imx8mp-u-boot.dtsi | 6 ++++++ arch/arm/dts/imx8mq-u-boot.dtsi | 6 ++++++ 4 files changed, 24 insertions(+) diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi index ecc2319279ea..8608fa004fdc 100644 --- a/arch/arm/dts/imx8mm-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-u-boot.dtsi @@ -164,6 +164,7 @@ }; #endif +#ifdef CONFIG_OPTEE tee: tee { description = "OP-TEE"; type = "tee"; @@ -178,6 +179,7 @@ optional; }; }; +#endif binman_fip: fip { arch = "arm64"; @@ -207,7 +209,11 @@ fdt = "fdt-SEQ"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI +#ifdef CONFIG_OPTEE loadables = "atf", "tee"; +#else + loadables = "atf"; +#endif #endif }; }; diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi index 4a4498b36b01..bf2bb0f17c77 100644 --- a/arch/arm/dts/imx8mn-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-u-boot.dtsi @@ -240,6 +240,7 @@ }; #endif +#ifdef CONFIG_OPTEE tee: tee { description = "OP-TEE"; type = "tee"; @@ -254,6 +255,7 @@ optional; }; }; +#endif binman_fip: fip { arch = "arm64"; @@ -283,7 +285,11 @@ fdt = "fdt-SEQ"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI +#ifdef CONFIG_OPTEE loadables = "atf", "tee"; +#else + loadables = "atf"; +#endif #endif }; }; diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi index 9ede98a11e42..9e590c3bba07 100644 --- a/arch/arm/dts/imx8mp-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-u-boot.dtsi @@ -185,6 +185,7 @@ }; #endif +#ifdef CONFIG_OPTEE tee: tee { description = "OP-TEE"; type = "tee"; @@ -199,6 +200,7 @@ optional; }; }; +#endif @fdt-SEQ { description = "NAME"; @@ -219,7 +221,11 @@ fdt = "fdt-SEQ"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI +#ifdef CONFIG_OPTEE loadables = "atf", "tee"; +#else + loadables = "atf"; +#endif #endif }; }; diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi index 93e2ef27f7ce..458657fc4749 100644 --- a/arch/arm/dts/imx8mq-u-boot.dtsi +++ b/arch/arm/dts/imx8mq-u-boot.dtsi @@ -144,6 +144,7 @@ }; #endif +#ifdef CONFIG_OPTEE tee: tee { description = "OP-TEE"; type = "tee"; @@ -158,6 +159,7 @@ optional; }; }; +#endif fdt { compression = "none"; @@ -179,7 +181,11 @@ fdt = "fdt"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI +#ifdef CONFIG_OPTEE loadables = "atf", "tee"; +#else + loadables = "atf"; +#endif #endif }; }; -- 2.34.1

3 5

[config 2 support v1 0/1] Add support for distinct mac-mode and phy mode.
by Boon Khai Ng 22 Jan '25

22 Jan '25

This patch adds support for configuring the ethernet MAC mode independently from the PHY mode on our SoC FPGA board. Specifically, this is necessary for a scenario where the ethernet controller MAC is connected to the FPGA HVIO with a different GMII interface, and the FPGA output is routed to the PHY using a RGMII interface. To support this configuration, a mechanism is introduced to handle separate MAC mode settings, ensuring that the MAC controller and PHY can operate correctly with their respective interface modes. If mac-mode is not defined, the MAC mode will default to the PHY mode, ensuring compatibility and proper operation between the MAC and PHY. Boon Khai Ng (1): net: dwc_eth_xgmac_socfpga: Add support for distinct mac-mode and phy mode. drivers/net/dwc_eth_xgmac_socfpga.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) -- 2.26.2

2 2

[mailbox error message v1 0/1] Ehancement proposal for improved FPGA Configuration Error Reporting
by Boon Khai Ng 22 Jan '25

22 Jan '25

Enhancing the FPGA configuration workflow to increase the visibility into the FPGA configuration process and help streamline troubleshooting efforts for the users. Currently, when an FPGA core image is loaded in U-Boot using the fpga load command, success messages are issued, but unsuccessful configurations do not return any helpful messages. This lack of feedback leaves users in the dark regarding the nature of the failure, making it challenging to quickly identify and resolve issues. To address this gap, I propose this patch that allows querying the SDM configuration status and reporting any errors detected by the SDM during FPGA configuration. This enhancement will provide valuable insights into the configuration process. Boon Khai Ng (1): fpga: intel_sdm_mb: add support for query SDM config error and status .../mach-socfpga/include/mach/mailbox_s10.h | 218 ++++++ drivers/fpga/intel_sdm_mb.c | 641 +++++++++++++++++- 2 files changed, 852 insertions(+), 7 deletions(-) -- 2.26.2

2 2

[XGMAC error message v1 0/1] Adding device name when printing error.
by Boon Khai Ng 22 Jan '25

22 Jan '25

In Intel SoC FPGA Agilex5, it support several ethernet instances, when there is an error occured at multiple interface it hardly tell which instances that is associated to that error. Hence, adding the device name at the error message to differentiate between which instance is having issue. Boon Khai Ng (1): net: dwc_eth_xgmac: Add device name for the error message. drivers/net/dwc_eth_xgmac.c | 82 +++++++++++++++++++++++-------------- 1 file changed, 52 insertions(+), 30 deletions(-) -- 2.26.2

2 2

[XGMAC RGMII-ID fix v1 0/1] Add support for rgmii-id phy mode
by Boon Khai Ng 22 Jan '25

22 Jan '25

An issue was identified where selecting the phy-mode as rgmii-id in the device tree source (DTS) would cause the `dwc_eth_xgmac_socfpga` driver to raise an unsupported phy mode error. >From the MAC controller's perspective, the rgmii and rgmii-id phy modes are effectively identical. To address this, both modes will now be configured to rgmii in the MAC controller. This change ensures that the rgmii-id phy mode is properly supported without error. Boon Khai Ng (1): net: dwc_eth_xgmac_socfpga: Add support for rgmii-id mode. drivers/net/dwc_eth_xgmac_socfpga.c | 1 + 1 file changed, 1 insertion(+) -- 2.26.2

2 2

[PATCH v1] arch: arm: mach-socfpga: Mailbox buffer and SDM doorbell improvement
by alif.zakuan.yuslaimi＠intel.com 22 Jan '25

22 Jan '25

From: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi(a)altera.com> The current write and notify SDM to read mechanism has a flaw where SDM is not notified enough to be able to read all the data in the buffer. This is caused by SDM doorbell will only be sent out once the command buffer overflow check is satisfied. If the command buffer does not reach overflow status, no SDM doorbell will be sent out, which may cause a timeout as the mailbox driver will be waiting for the SDM to read the buffer to empty even though SDM is not notified to do so. The solution is to remove the command buffer overflow check and set the SDM doorbell to always trigger at the end of the command buffer. This will ensure that the SDM is able to read all of the data. Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi(a)altera.com> --- arch/arm/mach-socfpga/mailbox_s10.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-socfpga/mailbox_s10.c b/arch/arm/mach-socfpga/mailbox_s10.c index 2b4f26040fe..b69bd3e47ec 100644 --- a/arch/arm/mach-socfpga/mailbox_s10.c +++ b/arch/arm/mach-socfpga/mailbox_s10.c @@ -88,6 +88,8 @@ static __always_inline int mbox_write_cmd_buffer(u32 *cin, u32 data, MBOX_WRITE_CMD_BUF(data, (*cin)++); *cin %= MBOX_CMD_BUFFER_SIZE; MBOX_WRITEL(*cin, MBOX_CIN); + if (is_cmdbuf_overflow) + *is_cmdbuf_overflow = 0; break; } timeout--; @@ -96,10 +98,6 @@ static __always_inline int mbox_write_cmd_buffer(u32 *cin, u32 data, if (!timeout) return -ETIMEDOUT; - /* Wait for the SDM to drain the FIFO command buffer */ - if (is_cmdbuf_overflow && *is_cmdbuf_overflow) - return mbox_wait_for_cmdbuf_empty(*cin); - return 0; } @@ -125,13 +123,11 @@ static __always_inline int mbox_fill_cmd_circular_buff(u32 header, u32 len, return ret; } - /* If SDM doorbell is not triggered after the last data is - * written into mailbox FIFO command buffer, trigger the - * SDM doorbell again to ensure SDM able to read the remaining - * data. + /* + * Always trigger the SDM doorbell at the end to ensure SDM able to read + * the remaining data. */ - if (!is_cmdbuf_overflow) - MBOX_WRITEL(1, MBOX_DOORBELL_TO_SDM); + MBOX_WRITEL(1, MBOX_DOORBELL_TO_SDM); return 0; } -- 2.25.1

2 1

[PATCH v2 0/2] MediaTek MT7629 OF_UPSTREAM migration (v2)
by Weijie Gao 21 Jan '25

21 Jan '25

This patch series migrates MediaTek MT7629 to OF_UPSTREAM Changes in v2: * Remove mt7629-rfb.dtb from arch/arm/dts/Makefile * Add wdt-reboot node to make reset command work Sam Shih (2): clk: mediatek: mt7629: fix gate offset of peri clock tree board: mediatek: mt7629: Migrate to OF_UPSTREAM arch/arm/dts/Makefile | 1 - arch/arm/dts/mt7629-rfb-u-boot.dtsi | 119 +++++++- arch/arm/dts/mt7629-rfb.dts | 123 --------- arch/arm/dts/mt7629.dtsi | 360 ------------------------- configs/mt7629_rfb_defconfig | 3 +- drivers/clk/mediatek/clk-mt7629.c | 14 +- include/dt-bindings/clock/mt7629-clk.h | 206 -------------- 7 files changed, 133 insertions(+), 693 deletions(-) delete mode 100644 arch/arm/dts/mt7629-rfb.dts delete mode 100644 arch/arm/dts/mt7629.dtsi delete mode 100644 include/dt-bindings/clock/mt7629-clk.h -- 2.34.1

2 3

[PATCH v3] sbp1: Add support for IBM SBP1 board
by Naresh Solanki 21 Jan '25

21 Jan '25

From: Patrick Rudolph <patrick.rudolph(a)9elements.com> Add defconfig & devicetree for IBM SBP1 board BMC based on AST2600 SoC. Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> Signed-off-by: Naresh Solanki <naresh.solanki(a)9elements.com> --- Changes in v3: - Align with upstream sbp1 devicetree. Changes in v2: - Update MAINTAINERS --- arch/arm/dts/Makefile | 1 + arch/arm/dts/ast2600-sbp1.dts | 5908 ++++++++++++++++++++++++++ board/aspeed/evb_ast2600/MAINTAINERS | 1 + configs/ibm-sbp1_defconfig | 126 + 4 files changed, 6036 insertions(+) create mode 100644 arch/arm/dts/ast2600-sbp1.dts create mode 100644 configs/ibm-sbp1_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index aef0425c96..6ec887e485 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1119,6 +1119,7 @@ dtb-$(CONFIG_BCM6878) += \ dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb dtb-$(CONFIG_ASPEED_AST2600) += \ ast2600-evb.dtb \ + ast2600-sbp1.dtb \ ast2600-x4tf.dtb dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb diff --git a/arch/arm/dts/ast2600-sbp1.dts b/arch/arm/dts/ast2600-sbp1.dts new file mode 100644 index 0000000000..2d15789c59 --- /dev/null +++ b/arch/arm/dts/ast2600-sbp1.dts @@ -0,0 +1,5908 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/i2c/i2c.h> +#include "ast2600-evb.dts" + +/ { + model = "IBM SBP1"; + compatible = "ibm,sbp1-bmc", "aspeed,ast2600"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + device_type = "memory"; + }; + + chosen { + stdout-path = &uart1; + bootargs = "console=tty0 console=ttyS0,115200 earlycon"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + aliases { + ethernet0 = &mac2; + ethernet1 = &mac3; + }; + + cpus { + cpu@0 { + clock-frequency = <1200000000>; + }; + cpu@1 { + clock-frequency = <1200000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + label = "LED_BMC_READY"; + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + retain-state-suspended; + panic-indicator; + }; + + led-id-tpm { + label = "LED_ID_TPM"; + gpios = <&smb_pex_vr_ctrl 12 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-bat { + label = "LED_ID_BAT"; + gpios = <&smb_pex_vr_ctrl 16 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-mgmt-port2 { + label = "LED_ID_MGMT_PORT2"; + gpios = <&smb_pex_vr_ctrl 17 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-mgmt-port1 { + label = "LED_ID_MGMT_PORT1"; + gpios = <&smb_pex_vr_ctrl 18 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-nic1-port1 { + label = "LED_ID_NIC1_PORT1"; + gpios = <&smb_pex_vr_ctrl 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-nic1-port2 { + label = "LED_ID_NIC1_PORT2"; + gpios = <&smb_pex_vr_ctrl 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-nic2-port1 { + label = "LED_ID_NIC2_PORT1"; + gpios = <&smb_pex_vr_ctrl 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-nic2-port2 { + label = "LED_ID_NIC2_PORT2"; + gpios = <&smb_pex_vr_ctrl 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-m2-ssd2 { + label = "LED_ID_M2_SSD2"; + gpios = <&smb_pex_vr_ctrl 36 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-m2-ssd1 { + label = "LED_ID_M2_SSD1"; + gpios = <&smb_pex_vr_ctrl 37 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dwr-frnt-p { + label = "LED_ID_DWR_FRNT_P"; + gpios = <&smb_svc_pex_cpu3_led 37 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + + default-state = "on"; + retain-state-suspended; + retain-state-shutdown; + }; + + led-pwr-dwr-frnt { + label = "LED_PWR_DWR_FRNT"; + gpios = <&smb_svc_pex_cpu3_led 36 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + + retain-state-suspended; + retain-state-shutdown; + }; + + led-pwr-dwr-back { + label = "LED_PWR_DWR_BACK"; + gpios = <&smb_pex_vr_ctrl 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + + retain-state-suspended; + retain-state-shutdown; + }; + + led-id-dwr-back-p { + label = "LED_ID_DWR_BACK_P"; + gpios = <&smb_pex_vr_ctrl 35 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + + default-state = "on"; + retain-state-suspended; + retain-state-shutdown; + }; + + led-id-cpu0 { + label = "LED_ID_CPU0"; + gpios = <&smb_svc_pex_cpu0_led 39 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-cpu1 { + label = "LED_ID_CPU1"; + gpios = <&smb_svc_pex_cpu1_led 39 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-cpu2 { + label = "LED_ID_CPU2"; + gpios = <&smb_svc_pex_cpu2_led 39 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-cpu3 { + label = "LED_ID_CPU3"; + gpios = <&smb_svc_pex_cpu3_led 39 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0e2 { + label = "LED_ID_DIMM_C0E2"; + gpios = <&smb_svc_pex_cpu0_led 20 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0e1 { + label = "LED_ID_DIMM_C0E1"; + gpios = <&smb_svc_pex_cpu0_led 21 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0f2 { + label = "LED_ID_DIMM_C0F2"; + gpios = <&smb_svc_pex_cpu0_led 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0f1 { + label = "LED_ID_DIMM_C0F1"; + gpios = <&smb_svc_pex_cpu0_led 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0g2 { + label = "LED_ID_DIMM_C0G2"; + gpios = <&smb_svc_pex_cpu0_led 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0g1 { + label = "LED_ID_DIMM_C0G1"; + gpios = <&smb_svc_pex_cpu0_led 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0h2 { + label = "LED_ID_DIMM_C0H2"; + gpios = <&smb_svc_pex_cpu0_led 26 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0h1 { + label = "LED_ID_DIMM_C0H1"; + gpios = <&smb_svc_pex_cpu0_led 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0a2 { + label = "LED_ID_DIMM_C0A2"; + gpios = <&smb_svc_pex_cpu0_led 28 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0a1 { + label = "LED_ID_DIMM_C0A1"; + gpios = <&smb_svc_pex_cpu0_led 29 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0b2 { + label = "LED_ID_DIMM_C0B2"; + gpios = <&smb_svc_pex_cpu0_led 30 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0b1 { + label = "LED_ID_DIMM_C0B1"; + gpios = <&smb_svc_pex_cpu0_led 31 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0c2 { + label = "LED_ID_DIMM_C0C2"; + gpios = <&smb_svc_pex_cpu0_led 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0c1 { + label = "LED_ID_DIMM_C0C1"; + gpios = <&smb_svc_pex_cpu0_led 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0d2 { + label = "LED_ID_DIMM_C0D2"; + gpios = <&smb_svc_pex_cpu0_led 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c0d1 { + label = "LED_ID_DIMM_C0D1"; + gpios = <&smb_svc_pex_cpu0_led 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1e2 { + label = "LED_ID_DIMM_C1E2"; + gpios = <&smb_svc_pex_cpu1_led 20 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1e1 { + label = "LED_ID_DIMM_C1E1"; + gpios = <&smb_svc_pex_cpu1_led 21 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1f2 { + label = "LED_ID_DIMM_C1F2"; + gpios = <&smb_svc_pex_cpu1_led 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1f1 { + label = "LED_ID_DIMM_C1F1"; + gpios = <&smb_svc_pex_cpu1_led 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1g2 { + label = "LED_ID_DIMM_C1G2"; + gpios = <&smb_svc_pex_cpu1_led 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1g1 { + label = "LED_ID_DIMM_C1G1"; + gpios = <&smb_svc_pex_cpu1_led 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1h2 { + label = "LED_ID_DIMM_C1H2"; + gpios = <&smb_svc_pex_cpu1_led 26 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1h1 { + label = "LED_ID_DIMM_C1H1"; + gpios = <&smb_svc_pex_cpu1_led 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1a2 { + label = "LED_ID_DIMM_C1A2"; + gpios = <&smb_svc_pex_cpu1_led 28 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1a1 { + label = "LED_ID_DIMM_C1A1"; + gpios = <&smb_svc_pex_cpu1_led 29 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1b2 { + label = "LED_ID_DIMM_C1B2"; + gpios = <&smb_svc_pex_cpu1_led 30 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1b1 { + label = "LED_ID_DIMM_C1B1"; + gpios = <&smb_svc_pex_cpu1_led 31 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1c2 { + label = "LED_ID_DIMM_C1C2"; + gpios = <&smb_svc_pex_cpu1_led 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1c1 { + label = "LED_ID_DIMM_C1C1"; + gpios = <&smb_svc_pex_cpu1_led 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1d2 { + label = "LED_ID_DIMM_C1D2"; + gpios = <&smb_svc_pex_cpu1_led 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c1d1 { + label = "LED_ID_DIMM_C1D1"; + gpios = <&smb_svc_pex_cpu1_led 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2e2 { + label = "LED_ID_DIMM_C2E2"; + gpios = <&smb_svc_pex_cpu2_led 20 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2e1 { + label = "LED_ID_DIMM_C2E1"; + gpios = <&smb_svc_pex_cpu2_led 21 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2f2 { + label = "LED_ID_DIMM_C2F2"; + gpios = <&smb_svc_pex_cpu2_led 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2f1 { + label = "LED_ID_DIMM_C2F1"; + gpios = <&smb_svc_pex_cpu2_led 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2g2 { + label = "LED_ID_DIMM_C2G2"; + gpios = <&smb_svc_pex_cpu2_led 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2g1 { + label = "LED_ID_DIMM_C2G1"; + gpios = <&smb_svc_pex_cpu2_led 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2h2 { + label = "LED_ID_DIMM_C2H2"; + gpios = <&smb_svc_pex_cpu2_led 26 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2h1 { + label = "LED_ID_DIMM_C2H1"; + gpios = <&smb_svc_pex_cpu2_led 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2a2 { + label = "LED_ID_DIMM_C2A2"; + gpios = <&smb_svc_pex_cpu2_led 28 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2a1 { + label = "LED_ID_DIMM_C2A1"; + gpios = <&smb_svc_pex_cpu2_led 29 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2b2 { + label = "LED_ID_DIMM_C2B2"; + gpios = <&smb_svc_pex_cpu2_led 30 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2b1 { + label = "LED_ID_DIMM_C2B1"; + gpios = <&smb_svc_pex_cpu2_led 31 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2c2 { + label = "LED_ID_DIMM_C2C2"; + gpios = <&smb_svc_pex_cpu2_led 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2c1 { + label = "LED_ID_DIMM_C2C1"; + gpios = <&smb_svc_pex_cpu2_led 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2d2 { + label = "LED_ID_DIMM_C2D2"; + gpios = <&smb_svc_pex_cpu2_led 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c2d1 { + label = "LED_ID_DIMM_C2D1"; + gpios = <&smb_svc_pex_cpu2_led 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3e2 { + label = "LED_ID_DIMM_C3E2"; + gpios = <&smb_svc_pex_cpu3_led 20 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3e1 { + label = "LED_ID_DIMM_C3E1"; + gpios = <&smb_svc_pex_cpu3_led 21 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3f2 { + label = "LED_ID_DIMM_C3F2"; + gpios = <&smb_svc_pex_cpu3_led 22 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3f1 { + label = "LED_ID_DIMM_C3F1"; + gpios = <&smb_svc_pex_cpu3_led 23 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3g2 { + label = "LED_ID_DIMM_C3G2"; + gpios = <&smb_svc_pex_cpu3_led 24 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3g1 { + label = "LED_ID_DIMM_C3G1"; + gpios = <&smb_svc_pex_cpu3_led 25 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3h2 { + label = "LED_ID_DIMM_C3H2"; + gpios = <&smb_svc_pex_cpu3_led 26 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3h1 { + label = "LED_ID_DIMM_C3H1"; + gpios = <&smb_svc_pex_cpu3_led 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3a2 { + label = "LED_ID_DIMM_C3A2"; + gpios = <&smb_svc_pex_cpu3_led 28 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3a1 { + label = "LED_ID_DIMM_C3A1"; + gpios = <&smb_svc_pex_cpu3_led 29 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3b2 { + label = "LED_ID_DIMM_C3B2"; + gpios = <&smb_svc_pex_cpu3_led 30 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3b1 { + label = "LED_ID_DIMM_C3B1"; + gpios = <&smb_svc_pex_cpu3_led 31 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3c2 { + label = "LED_ID_DIMM_C3C2"; + gpios = <&smb_svc_pex_cpu3_led 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3c1 { + label = "LED_ID_DIMM_C3C1"; + gpios = <&smb_svc_pex_cpu3_led 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3d2 { + label = "LED_ID_DIMM_C3D2"; + gpios = <&smb_svc_pex_cpu3_led 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-c3d1 { + label = "LED_ID_DIMM_C3D1"; + gpios = <&smb_svc_pex_cpu3_led 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd01 { + label = "LED_ID_RSSD01"; + gpios = <&smb_svc_pex_rssd01_16 0 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd02 { + label = "LED_ID_RSSD02"; + gpios = <&smb_svc_pex_rssd01_16 1 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd03 { + label = "LED_ID_RSSD03"; + gpios = <&smb_svc_pex_rssd01_16 2 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd04 { + label = "LED_ID_RSSD04"; + gpios = <&smb_svc_pex_rssd01_16 3 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd05 { + label = "LED_ID_RSSD05"; + gpios = <&smb_svc_pex_rssd01_16 4 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd06 { + label = "LED_ID_RSSD06"; + gpios = <&smb_svc_pex_rssd01_16 5 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd07 { + label = "LED_ID_RSSD07"; + gpios = <&smb_svc_pex_rssd01_16 6 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd08 { + label = "LED_ID_RSSD08"; + gpios = <&smb_svc_pex_rssd01_16 7 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd09 { + label = "LED_ID_RSSD09"; + gpios = <&smb_svc_pex_rssd01_16 8 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd10 { + label = "LED_ID_RSSD10"; + gpios = <&smb_svc_pex_rssd01_16 9 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd11 { + label = "LED_ID_RSSD11"; + gpios = <&smb_svc_pex_rssd01_16 10 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd12 { + label = "LED_ID_RSSD12"; + gpios = <&smb_svc_pex_rssd01_16 11 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd13 { + label = "LED_ID_RSSD13"; + gpios = <&smb_svc_pex_rssd01_16 12 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd14 { + label = "LED_ID_RSSD14"; + gpios = <&smb_svc_pex_rssd01_16 13 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd15 { + label = "LED_ID_RSSD15"; + gpios = <&smb_svc_pex_rssd01_16 14 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd16 { + label = "LED_ID_RSSD16"; + gpios = <&smb_svc_pex_rssd01_16 15 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd17 { + label = "LED_ID_RSSD17"; + gpios = <&smb_svc_pex_rssd17_32 0 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd18 { + label = "LED_ID_RSSD18"; + gpios = <&smb_svc_pex_rssd17_32 1 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd19 { + label = "LED_ID_RSSD19"; + gpios = <&smb_svc_pex_rssd17_32 2 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd20 { + label = "LED_ID_RSSD20"; + gpios = <&smb_svc_pex_rssd17_32 3 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd21 { + label = "LED_ID_RSSD21"; + gpios = <&smb_svc_pex_rssd17_32 4 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd22 { + label = "LED_ID_RSSD22"; + gpios = <&smb_svc_pex_rssd17_32 5 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd23 { + label = "LED_ID_RSSD23"; + gpios = <&smb_svc_pex_rssd17_32 6 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd24 { + label = "LED_ID_RSSD24"; + gpios = <&smb_svc_pex_rssd17_32 7 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd25 { + label = "LED_ID_RSSD25"; + gpios = <&smb_svc_pex_rssd17_32 8 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd26 { + label = "LED_ID_RSSD26"; + gpios = <&smb_svc_pex_rssd17_32 9 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd27 { + label = "LED_ID_RSSD27"; + gpios = <&smb_svc_pex_rssd17_32 10 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd28 { + label = "LED_ID_RSSD28"; + gpios = <&smb_svc_pex_rssd17_32 11 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd29 { + label = "LED_ID_RSSD29"; + gpios = <&smb_svc_pex_rssd17_32 12 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd30 { + label = "LED_ID_RSSD30"; + gpios = <&smb_svc_pex_rssd17_32 13 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd31 { + label = "LED_ID_RSSD31"; + gpios = <&smb_svc_pex_rssd17_32 14 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-dimm-rssd32 { + label = "LED_ID_RSSD32"; + gpios = <&smb_svc_pex_rssd17_32 15 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm01 { + label = "LED_ID_FAN_ASM01"; + gpios = <&smb_svc_pex_rssd01_16 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm02 { + label = "LED_ID_FAN_ASM02"; + gpios = <&smb_svc_pex_rssd01_16 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm03 { + label = "LED_ID_FAN_ASM03"; + gpios = <&smb_svc_pex_rssd01_16 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm04 { + label = "LED_ID_FAN_ASM04"; + gpios = <&smb_svc_pex_rssd01_16 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm05 { + label = "LED_ID_FAN_ASM05"; + gpios = <&smb_svc_pex_rssd01_16 36 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm06 { + label = "LED_ID_FAN_ASM06"; + gpios = <&smb_svc_pex_rssd01_16 37 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm07 { + label = "LED_ID_FAN_ASM07"; + gpios = <&smb_svc_pex_rssd17_32 32 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm08 { + label = "LED_ID_FAN_ASM08"; + gpios = <&smb_svc_pex_rssd17_32 33 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm09 { + label = "LED_ID_FAN_ASM09"; + gpios = <&smb_svc_pex_rssd17_32 34 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm10 { + label = "LED_ID_FAN_ASM10"; + gpios = <&smb_svc_pex_rssd17_32 35 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm11 { + label = "LED_ID_FAN_ASM11"; + gpios = <&smb_svc_pex_rssd17_32 36 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + + led-id-fan-asm12 { + label = "LED_ID_FAN_ASM12"; + gpios = <&smb_svc_pex_rssd17_32 37 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_YELLOW>; + }; + }; + + p12v: fixedregulator-p12v { + compatible = "regulator-fixed"; + regulator-name = "p12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + p3v3_bmc_aux: fixedregulator-p3v3-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p3v3_bmc_aux"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + p1v2_bmc_aux: fixedregulator-p1v2-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v2_bmc_aux"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + p12v-a-consumer { + compatible = "regulator-output"; + vout-supply = <&p12v_a>; + }; + + p12v-b-consumer { + compatible = "regulator-output"; + vout-supply = <&p12v_b>; + }; + + p12v-c-consumer { + compatible = "regulator-output"; + vout-supply = <&p12v_c>; + }; + + p12v-d-consumer { + compatible = "regulator-output"; + vout-supply = <&p12v_d>; + }; + + pvccinfaon-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccinfaon_cpu0>; + }; + + pvccfa-ehv-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_cpu0>; + }; + + pvnn-main-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvnn_main_cpu0>; + }; + + pvccin-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccin_cpu0>; + }; + + pvccfa-ehv-fivra-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_fivra_cpu0>; + }; + + pvccd-hv-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccd_hv_cpu0>; + }; + + pvpp-hbm-cpu0-consumer { + compatible = "regulator-output"; + vout-supply = <&pvpp_hbm_cpu0>; + }; + + pvccinfaon-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccinfaon_cpu1>; + }; + + pvccfa-ehv-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_cpu1>; + }; + + pvnn-main-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvnn_main_cpu1>; + }; + + pvccin-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccin_cpu1>; + }; + + pvccfa-ehv-fivra-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_fivra_cpu1>; + }; + + pvccd-hv-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccd_hv_cpu1>; + }; + + pvpp-hbm-cpu1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvpp_hbm_cpu1>; + }; + + pvccinfaon-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccinfaon_cpu2>; + }; + + pvccfa-ehv-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_cpu2>; + }; + + pvnn-main-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvnn_main_cpu2>; + }; + + pvccin-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccin_cpu2>; + }; + + pvccfa-ehv-fivra-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_fivra_cpu2>; + }; + + pvccd-hv-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccd_hv_cpu2>; + }; + + pvpp-hbm-cpu2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvpp_hbm_cpu2>; + }; + + pvccinfaon-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccinfaon_cpu3>; + }; + + pvccfa-ehv-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_cpu3>; + }; + + pvnn-main-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvnn_main_cpu3>; + }; + + pvccin-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccin_cpu3>; + }; + + pvccfa-ehv-fivra-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccfa_ehv_fivra_cpu3>; + }; + + pvccd-hv-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvccd_hv_cpu3>; + }; + + pvpp-hbm-cpu3-consumer { + compatible = "regulator-output"; + vout-supply = <&pvpp_hbm_cpu3>; + }; + + p1v05-pch-aux-consumer { + compatible = "regulator-output"; + vout-supply = <&p1v05_pch_aux>; + }; + + p1v8-pch-aux-consumer { + compatible = "regulator-output"; + vout-supply = <&p1v8_pch_aux>; + }; + + p3v3-pch-consumer { + compatible = "regulator-output"; + vout-supply = <&p3v3_pch>; + }; + + p5v-consumer { + compatible = "regulator-output"; + vout-supply = <&p5v>; + }; + + smb-m2-ssb-ssd2 { + compatible = "regulator-output"; + vout-supply = <&sw0_smb_m2_ssb_ssd2>; + }; + + smb-m2-ssb-ssd1 { + compatible = "regulator-output"; + vout-supply = <&sw0_smb_m2_ssb_ssd1>; + }; + + ssb-rssd01-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd01>; + }; + + ssb-rssd01-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd01>; + }; + + ssb-rssd02-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd02>; + }; + + ssb-rssd02-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd02>; + }; + + ssb-rssd03-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd03>; + }; + + ssb-rssd03-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd03>; + }; + + ssb-rssd04-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd04>; + }; + + ssb-rssd04-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd04>; + }; + + ssb-rssd05-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd05>; + }; + + ssb-rssd05-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd05>; + }; + + ssb-rssd06-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd06>; + }; + + ssb-rssd06-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd06>; + }; + + ssb-rssd07-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd07>; + }; + + ssb-rssd07-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd07>; + }; + + ssb-rssd08-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd08>; + }; + + ssb-rssd08-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd08>; + }; + + ssb-rssd09-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd09>; + }; + + ssb-rssd09-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd09>; + }; + + ssb-rssd10-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd10>; + }; + + ssb-rssd10-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd10>; + }; + + ssb-rssd11-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd11>; + }; + + ssb-rssd11-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd11>; + }; + + ssb-rssd12-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd12>; + }; + + ssb-rssd12-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd12>; + }; + + ssb-rssd13-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd13>; + }; + + ssb-rssd13-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd13>; + }; + + ssb-rssd14-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd14>; + }; + + ssb-rssd14-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd14>; + }; + + ssb-rssd15-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd15>; + }; + + ssb-rssd15-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd15>; + }; + + ssb-rssd16-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd16>; + }; + + ssb-rssd16-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd16>; + }; + + ssb-rssd17-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd17>; + }; + + ssb-rssd17-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd17>; + }; + + ssb-rssd18-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd18>; + }; + + ssb-rssd18-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd18>; + }; + + ssb-rssd19-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd19>; + }; + + ssb-rssd19-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd19>; + }; + + ssb-rssd20-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd20>; + }; + + ssb-rssd20-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd20>; + }; + + ssb-rssd21-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd21>; + }; + + ssb-rssd21-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd21>; + }; + + ssb-rssd22-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd22>; + }; + + ssb-rssd22-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd22>; + }; + + ssb-rssd23-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd23>; + }; + + ssb-rssd23-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd23>; + }; + + ssb-rssd24-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd24>; + }; + + ssb-rssd24-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd24>; + }; + + ssb-rssd25-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd25>; + }; + + ssb-rssd25-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd25>; + }; + + ssb-rssd26-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd26>; + }; + + ssb-rssd26-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd26>; + }; + + ssb-rssd27-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd27>; + }; + + ssb-rssd27-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd27>; + }; + + ssb-rssd28-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd28>; + }; + + ssb-rssd28-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd28>; + }; + + ssb-rssd29-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd29>; + }; + + ssb-rssd29-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd29>; + }; + + ssb-rssd30-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd30>; + }; + + ssb-rssd30-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd30>; + }; + + ssb-rssd31-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd31>; + }; + + ssb-rssd31-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd31>; + }; + + ssb-rssd32-sw0 { + compatible = "regulator-output"; + vout-supply = <&sw0_ssb_rssd32>; + }; + + ssb-rssd32-sw1 { + compatible = "regulator-output"; + vout-supply = <&sw1_ssb_rssd32>; + }; + + p3v3-nic-consumer { + compatible = "regulator-output"; + vout-supply = <&p3v3_nic>; + }; + + p1v8-nic-consumer { + compatible = "regulator-output"; + vout-supply = <&p1v8_nic>; + }; + + p1v2-nic-consumer { + compatible = "regulator-output"; + vout-supply = <&p1v2_nic>; + }; + + pvcore-nic1-consumer { + compatible = "regulator-output"; + vout-supply = <&pvcore_nic1>; + }; + + pvcore-nic2-consumer { + compatible = "regulator-output"; + vout-supply = <&pvcore_nic2>; + }; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>, <0x81>; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +&uart1 { + bootph-all; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + status = "disabled"; +}; + +&mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio3_default &pinctrl_mdio4_default>; +}; + +&gpio1 { + status = "disabled"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default>; +}; + +&mac0 { + status = "disabled"; +}; + +&mac1 { + status = "disabled"; +}; + +&mac2 { + status = "okay"; + + phy-mode = "rgmii"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; +}; + +&mac3 { + status = "okay"; + + phy-mode = "rgmii"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii4_default>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&gpio0 { + status = "okay"; + + gpio-line-names = + /* A0 - A7 */ + "", "", "", "", "", "", "", "", + /* B0 - B7 */ + "", "", "FM_ADR_TRIGGER_R_N", "RST_PLTRST_BUF_N", "BMC_TPM_RESET_N", "BMC_TPM_IRQ_N", + "PCH_TPM_RESET_N", "PCH_TPM_IRQ_N", + /* C0 - C7 */ + "", "", "", "", "", "", "", "", + /* D0 - D7 */ + "", "", "", "", "", "", "", "", + /* E0 - E7 */ + "", "", "", "", "", "", "", "", + /* F0 - F7 */ + "", "", "", "BMC_MUX_CPU1_RST_INT_N", "BMC_MUX_CPU2_RST_INT_N", "", "", "", + /* G0 - G7 */ + "FM_SSD_CLK_DRVR1_EN", "FM_CK440Q_DEV_EN", "BMC_MAC1_RESET_N", "FM_DB2000_DEV_EN", + "FM_CPU_RMCA_LVT3_N", "FM_CPU_CATERR_LVT3_N", "FM_DBP_PRESENT_N", "", + /* H0 - H7 */ + "SMB_SVC_PEX_RSSD17_32_INT", "LED_BMC_RDY", "RST_DBP_N", "", "", "", "", "", + /* I0 - I7 */ + "JTAG_MUX_MODE_SEL", "JTAG_MUX_TRANS_ENBL", "JTAG_MUX_LSP_SEL5", "JTAG_MUX_MSTR_SEL", + "JTAG_MUX_LSP_SEL3", "", "JTAG_MUX_ENBL_N", "JTAG_MUX_RST_N", + /* J0 - J7 */ + "", "", "", "", "", "", "", "", + /* K0 - K7 */ + "", "", "", "", "", "", "", "", + /* L0 - L7 */ + "", "", "", "", "RST_RTCRST_N", "RST_SRTCRST_N", "", "", + /* M0 - M7 */ + "BMC_UART1_CTS_N", "BMC_UART1_DCD_N", "BMC_UART1_DSR_N", "BMC_UART1_RI_N", + "BMC_UART1_DTR_N", "BMC_UART1_RTS_N", "", "", + /* N0 - N7 */ + "IRQ_BMC_PCH_NMI", "", "FM_PCH_BMC_THERMTRIP_N", "FM_BIOS_POST_CMPLT_N", "RST_PLTRST_N", + "FM_FLASH_SEC_OVRD", "FM_SMI_ACTIVE_N", "PWRGD_DBP", + /* O0 - O7 */ + "CATERR_CPU2_EN", "H_LVT1_THERMTRIP_N", "CATERR_CPU3_EN", "SMB_SVC_PEX_CPU0_LED_INT", + "H_LVT1_MEMTRIP_N", "", "CATERR_CPU1_EN", "FM_PCH_ADR_COMPLETE_N", + /* P0 - P7 */ + "PWRGD_SYS_PWROK", "PWRGD_PCH_PWROK", "BMC_MUX_CPU3_RST_INT_N", "BMC_MUX_SVC_RSSD_INT", + "FM_SLPS4_N", "IRQ_SML0_ALERT_N", "FM_SLPS3_N", "LED_BMC_HB", + /* Q0 - Q7 */ + "", "PEX_BMC_RST", "PEX_VR_CTRL_RST", "PEX_NIC_RST", "PEX_CPU0_LED_RST", "PEX_CPU1_LED_RST", + "PEX_CPU2_LED_RST", "PEX_CPU3_LED_RST", + /* R0 - R7 */ + "BMC_MUX_FANSSB_RSSD17_32_RST_INT_N", "BMC_MUX_FANPWM_RSSD01_16_RST_INT_N", + "BMC_MUX_SVC_VR_RST_INT_N", "BMC_MUX_NIC_RST_INT_N", "BMC_MUX_SVC_EXP_RST_INT_N", + "FM_CPU_ERR2_LVT3_N", "BMC_MUX_CPU0_RST_INT_N", "BMC_MUX_M2_RST_INT_N", + /* S0 - S7 */ + "SMB_SVC_PEX_RSSD01_16_INT", "RST_PCH_RSMRST_R_N", "", "", "BMC_ROT_FPGA_RESET_N", + "FM_SSD_CLK_DRVR0_EN", "", "", + /* T0 - T7 */ + "", "", "", "", "", "", "", "", + /* U0 - U7 */ + "", "", "", "", "", "", "", "", + /* V0 - V7 */ + "BMC_PEX_IRQ_INT", "RTC_BATT_TEST", "SMB_PEX_VR_CTRL_INT", "SMB_SVC_PEX_CPU3_LED_INT", + "PWRGD_CPUPWRGD", "SMB_SVC_PEX_CPU2_LED_INT", "SMB_SVC_PEX_CPU1_LED_INT", + "BMC_MAC0_RESET_N", + /* W0 - W7 */ + "", "", "", "", "", "", "", "", + /* X0 - X7 */ + "", "", "", "", "", "", "", "", + /* Y0 - Y7 */ + "FM_THROTTLE_N", "FM_PASSWORD_CLEAR_N", "H_LVT3_CATERR_DLY_N", "FM_CPU_OL_INT_R_N", "", "", + "", "", + /* Z0 - Z7 */ + "FM_CPU_ERR0_LVT3_N", "FM_CPU_ERR1_LVT3_N", "BMC_MUX_VR_PCH_CPU_RST_INT_N", + "JTAG_MUX_LSP_SEL1", "", "JTAG_MUX_LSP_SEL4", "JTAG_MUX_LSP_SEL2", ""; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_unbiased_default>; + + line_50 { + gpio-hog; + gpios = <50 GPIO_ACTIVE_LOW>; + output-low; + line-name = "BMC_MAC1_RESET_N"; + }; + line_175 { + gpio-hog; + gpios = <175 GPIO_ACTIVE_LOW>; + output-low; + line-name = "BMC_MAC0_RESET_N"; + }; + +}; + +&pinctrl { + pinctrl_gpio0_unbiased_default: gpio_default { + pins = "AB15", "AD14", "R23", "A18", "AD24", "AD15", "AE14", "AC15", "U25", "AA24", + "V24", "W26", "AA23", "V26", "U24", "V25", "AE15", "C15", "F15"; + bias-disable; + }; +}; + +&i2c1 { + status = "okay"; + + bmc_mux_nic: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_nic: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <19 1>, <22 6>, <30 6>, <38 2>; + + gpio-line-names = + /* GPORT0 */ + "IRQ_NIC2_OVT_WRNG", "FM_NIC2_ALLSTANDBY_N", "IRQ_NIC2_OVT_SHTDN", + "SMB_VR_PVCORE_NIC2_ALERT_N", "FM_NIC2_PERST1_N", + "SMB_NIC2_ALERT_N", "FM_NIC2_PERST3_N", "FM_NIC2_PERST2_N", + /* GPORT1 */ + "FM_NIC1_RST_N", "FM_NIC1_PERST0_N", "FM_NIC1_PERST2_N", + "FM_NIC1_PERST3_N", "SMB_NIC1_ALERT_N", "FM_NIC1_PERST1_N", + "SMB_VR_PVCORE_NIC1_ALERT_N", "IRQ_NIC1_OVT_SHTDN", + /* GPORT2 */ + "SMB_VR_P3V3_NIC_ALERT_N", "FM_NIC2_FLASH_PRSNT", + "FM_NIC1_FLASH_PRSNT", "", + /* GPORT3 */ + "FM_NIC2_PERST0_N", "FM_NIC2_RST_N", "", "", "", "", "", "", + /* GPORT4 */ + "FM_NIC1_ALLSTANDBY_N", "IRQ_NIC1_OVT_WRNG", "", "", "", "", "", "", + /* GPORT5 */ + "SMB_VR_P1V8_NIC_ALERT_N", "SMB_VR_P1V2_NIC_ALERT_N", "", ""; + + pinctrl-0 = <&U62160_pins>; + pinctrl-names = "default"; + U62160_pins: cfg-pins { + pins = "gp03", "gp16", "gp20", "gp50", "gp51"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvcore_nic2: ir38263-pvcore-nic2@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "pvcore_nic2"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pvcore_nic1: ir38263-pvcore-nic1@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "pvcore_nic1"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + p3v3_nic: ir38263-p3v3-nic@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p3v3_nic"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + p1v2_nic: ir38263-p1v2-nic@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p1v2_nic"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + p1v8_nic: ir38263-p1v8-nic@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p1v8_nic"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + i2cmux1: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 7) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + smb_m2_ssb_ssd1: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p3v3_aux>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "m2_ssb_ssd1:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_smb_m2_ssb_ssd1: sw0 { + shunt-resistor-micro-ohms = <12000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <2800000>; + regulator-name = "p3v3_m2_ssd1"; + regulator-enable-ramp-delay = <10000>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + smb_m2_ssb_ssd2: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <39 IRQ_TYPE_LEVEL_LOW>; + vss1-supply = <&p3v3_aux>; + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "m2_ssb_ssd2:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_smb_m2_ssb_ssd2: sw0 { + shunt-resistor-micro-ohms = <12000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <2800000>; + regulator-name = "p3v3_m2_ssd2"; + regulator-enable-ramp-delay = <10000>; + }; + }; + }; + }; + + i2c@6 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c4 { + status = "okay"; + multi-master; + bus-frequency = <1000000>; + + bmc-slave@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + + i2c-protocol; + }; +}; + +&i2c5 { + status = "okay"; + + i2cmux2: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + p1v05_pch_aux: ir38263-p1v05-pch-aux@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p1v05_pch_aux"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + p1v8_pch_aux: ir38060-p1v8-pch-aux@40 { + compatible = "infineon,ir38060"; + reg = <0x40>; + + regulator-name = "p1v8_pch_aux"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c14 { + status = "okay"; + + i2cmux13: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 6) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_cpu0_event: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&smb_svc_pex_cpu0_led 16 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>; + + gpio-line-names = + /* GPORT0 */ + "PWRGD_CHD_CPU0", "PWRGD_CHC_CPU0", + "PWRGD_CHB_CPU0", "PWRGD_CHA_CPU0", + "PWRGD_CHE_CPU0", "PWRGD_CHF_CPU0", + "PWRGD_CHG_CPU0", "PWRGD_CHH_CPU0", + /* GPORT1 */ + "SMB_VR_PVPP_HBM_CPU0_ALERT_N", "SMB_VR_PVCCINFAON_CPU0_ALERT_N", + "SMB_VR_PVNN_MAIN_CPU0_ALERT_N", "SMB_VR_PVCCD_HV_CPU0_ALERT_N", + "SMB_VR_PVCCIN_CPU0_ALERT_N", "SEL_SMB_DIMM_CPU0", + "", "", + /* GPORT2 */ + "PWRGD_LVC3_CPU0_AB_DRAM_G", "PWRGD_LVC3_CPU0_CD_DRAM_G", + "PWRGD_LVC3_CPU0_EF_DRAM_G", "PWRGD_LVC3_CPU0_GH_DRAM_G", + /* GPORT3 */ + "FM_CPU0_DISABLE_COD_N", "", + "RST_LVC3_CPU0_RESET_N", "PWRGD_LVC3_CPU0_PWRGOOD", + "PWRGD_PLT_AUX_CPU0_LVT3", "", + "", "", + /* GPORT4 */ + "H_LVT3_CPU0_PROCHOT_N", "H_LVT3_CPU0_MEMHOT_IN_N", + "H_LVT3_CPU0_MEMHOT_OUT_N", "H_LVT3_CPU0_MEMTRIP_OUT_N", + "H_LVT3_CPU0_THERMTRIP_OUT_N", "", + "H_LVT3_CPU0_NMI", "FM_S3M_CPU0_CD_INIT_ERROR", + /* GPORT5 */ + "FM_CPU0_PKG_ID0", "FM_CPU0_PKG_ID1", + "FM_CPU0_PROC_ID0", "FM_CPU0_PROC_ID1"; + + pinctrl-0 = <&U62080_pins>; + pinctrl-names = "default"; + U62080_pins: cfg-pins { + pins = "gp10", "gp11", "gp12", "gp13", "gp14"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvccinfaon-pvccfa-cpu0@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccinfaon_cpu0: vout0 { + regulator-name = "pvccinfaon_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_cpu0: vout1 { + regulator-name = "pvccfa_ehv_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + tda38640-pvnn-main-cpu0@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu0: vout { + regulator-name = "pvnn_main_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mp2973-pvccin-pvccfa-cpu0@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccin_cpu0: vout0 { + regulator-name = "pvccin_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_fivra_cpu0: vout1 { + regulator-name = "pvccfa_ehv_fivra_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvccd-hv-cpu0@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + infineon,en-pin-fixed-level; + + regulators { + pvccd_hv_cpu0: vout { + regulator-name = "pvccd_hv_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvpp-hbm-cpu0@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvpp_hbm_cpu0: vout { + regulator-name = "pvpp_hbm_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c7 { + status = "okay"; + + i2cmux4: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(F, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_cpu1_event: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&smb_svc_pex_cpu1_led 16 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>; + + gpio-line-names = + /* GPORT0 */ + "PWRGD_CHD_CPU1", "PWRGD_CHC_CPU1", + "PWRGD_CHB_CPU1", "PWRGD_CHA_CPU1", + "PWRGD_CHE_CPU1", "PWRGD_CHF_CPU1", + "PWRGD_CHG_CPU1", "PWRGD_CHH_CPU1", + /* GPORT1 */ + "SMB_VR_PVPP_HBM_CPU1_ALERT_N", "SMB_VR_PVCCINFAON_CPU1_ALERT_N", + "SMB_VR_PVNN_MAIN_CPU1_ALERT_N", "SMB_VR_PVCCD_HV_CPU1_ALERT_N", + "SMB_VR_PVCCIN_CPU1_ALERT_N", "SEL_SMB_DIMM_CPU1", + "", "", + /* GPORT2 */ + "PWRGD_LVC3_CPU1_AB_DRAM_G", "PWRGD_LVC3_CPU1_CD_DRAM_G", + "PWRGD_LVC3_CPU1_EF_DRAM_G", "PWRGD_LVC3_CPU1_GH_DRAM_G", + /* GPORT3 */ + "FM_CPU1_DISABLE_COD_N", "", + "RST_LVC3_CPU1_RESET_N", "PWRGD_LVC3_CPU1_PWRGOOD", + "PWRGD_PLT_AUX_CPU1_LVT3", "", + "", "", + /* GPORT4 */ + "H_LVT3_CPU1_PROCHOT_N", "H_LVT3_CPU1_MEMHOT_IN_N", + "H_LVT3_CPU1_MEMHOT_OUT_N", "H_LVT3_CPU1_MEMTRIP_OUT_N", + "H_LVT3_CPU1_THERMTRIP_OUT_N", "", + "H_LVT3_CPU1_NMI", "FM_S3M_CPU1_CD_INIT_ERROR", + /* GPORT5 */ + "FM_CPU1_PKG_ID0", "FM_CPU1_PKG_ID1", + "FM_CPU1_PROC_ID0", "FM_CPU1_PROC_ID1"; + + pinctrl-0 = <&U62090_pins>; + pinctrl-names = "default"; + U62090_pins: cfg-pins { + pins = "gp10", "gp11", "gp12", "gp13", "gp14"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvccinfaon-pvccfa-cpu1@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccinfaon_cpu1: vout0 { + regulator-name = "pvccinfaon_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_cpu1: vout1 { + regulator-name = "pvccfa_ehv_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + tda38640-pvnn-main-cpu1@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu1: vout { + regulator-name = "pvnn_main_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mp2973-pvccin-pvccfa-cpu1@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccin_cpu1: vout0 { + regulator-name = "pvccin_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_fivra_cpu1: vout1 { + regulator-name = "pvccfa_ehv_fivra_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvccd-hv-cpu1@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + infineon,en-pin-fixed-level; + + regulators { + pvccd_hv_cpu1: vout { + regulator-name = "pvccd_hv_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvpp-hbm-cpu1@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu1_event>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvpp_hbm_cpu1: vout { + regulator-name = "pvpp_hbm_cpu1"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c6 { + status = "okay"; + + i2cmux3: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_cpu2_event: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&smb_svc_pex_cpu2_led 16 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>; + + gpio-line-names = + /* GPORT0 */ + "PWRGD_CHD_CPU2", "PWRGD_CHC_CPU2", + "PWRGD_CHB_CPU2", "PWRGD_CHA_CPU2", + "PWRGD_CHE_CPU2", "PWRGD_CHF_CPU2", + "PWRGD_CHG_CPU2", "PWRGD_CHH_CPU2", + /* GPORT1 */ + "SMB_VR_PVPP_HBM_CPU2_ALERT_N", "SMB_VR_PVCCINFAON_CPU2_ALERT_N", + "SMB_VR_PVNN_MAIN_CPU2_ALERT_N", "SMB_VR_PVCCD_HV_CPU2_ALERT_N", + "SMB_VR_PVCCIN_CPU2_ALERT_N", "SEL_SMB_DIMM_CPU2", + "", "", + /* GPORT2 */ + "PWRGD_LVC3_CPU2_AB_DRAM_G", "PWRGD_LVC3_CPU2_CD_DRAM_G", + "PWRGD_LVC3_CPU2_EF_DRAM_G", "PWRGD_LVC3_CPU2_GH_DRAM_G", + /* GPORT3 */ + "FM_CPU2_DISABLE_COD_N", "", + "RST_LVC3_CPU2_RESET_N", "PWRGD_LVC3_CPU2_PWRGOOD", + "PWRGD_PLT_AUX_CPU2_LVT3", "", + "", "", + /* GPORT4 */ + "H_LVT3_CPU2_PROCHOT_N", "H_LVT3_CPU2_MEMHOT_IN_N", + "H_LVT3_CPU2_MEMHOT_OUT_N", "H_LVT3_CPU2_MEMTRIP_OUT_N", + "H_LVT3_CPU2_THERMTRIP_OUT_N", "", + "H_LVT3_CPU2_NMI", "FM_S3M_CPU2_CD_INIT_ERROR", + /* GPORT5 */ + "FM_CPU2_PKG_ID0", "FM_CPU2_PKG_ID1", + "FM_CPU2_PROC_ID0", "FM_CPU2_PROC_ID1"; + + pinctrl-0 = <&U62100_pins>; + pinctrl-names = "default"; + U62100_pins: cfg-pins { + pins = "gp10", "gp11", "gp12", "gp13", "gp14"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvccinfaon-pvccfa-cpu2@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccinfaon_cpu2: vout0 { + regulator-name = "pvccinfaon_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_cpu2: vout1 { + regulator-name = "pvccfa_ehv_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + tda38640-pvnn-main-cpu2@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu2: vout { + regulator-name = "pvnn_main_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mp2973-pvccin-pvccfa-cpu2@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccin_cpu2: vout0 { + regulator-name = "pvccin_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_fivra_cpu2: vout1 { + regulator-name = "pvccfa_ehv_fivra_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvccd-hv-cpu2@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + infineon,en-pin-fixed-level; + + regulators { + pvccd_hv_cpu2: vout { + regulator-name = "pvccd_hv_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvpp-hbm-cpu2@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu2_event>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvpp_hbm_cpu2: vout { + regulator-name = "pvpp_hbm_cpu2"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c12 { + status = "okay"; + + i2cmux22: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(P, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_cpu3_event: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&smb_svc_pex_cpu3_led 16 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>; + + gpio-line-names = + /* GPORT0 */ + "PWRGD_CHD_CPU3", "PWRGD_CHC_CPU3", + "PWRGD_CHB_CPU3", "PWRGD_CHA_CPU3", + "PWRGD_CHE_CPU3", "PWRGD_CHF_CPU3", + "PWRGD_CHG_CPU3", "PWRGD_CHH_CPU3", + /* GPORT1 */ + "SMB_VR_PVPP_HBM_CPU3_ALERT_N", "SMB_VR_PVCCINFAON_CPU3_ALERT_N", + "SMB_VR_PVNN_MAIN_CPU3_ALERT_N", "SMB_VR_PVCCD_HV_CPU3_ALERT_N", + "SMB_VR_PVCCIN_CPU3_ALERT_N", "SEL_SMB_DIMM_CPU3", + "", "", + /* GPORT2 */ + "PWRGD_LVC3_CPU3_AB_DRAM_G", "PWRGD_LVC3_CPU3_CD_DRAM_G", + "PWRGD_LVC3_CPU3_EF_DRAM_G", "PWRGD_LVC3_CPU3_GH_DRAM_G", + /* GPORT3 */ + "FM_CPU3_DISABLE_COD_N", "", + "RST_LVC3_CPU3_RESET_N", "PWRGD_LVC3_CPU3_PWRGOOD", + "PWRGD_PLT_AUX_CPU3_LVT3", "", + "", "", + /* GPORT4 */ + "H_LVT3_CPU3_PROCHOT_N", "H_LVT3_CPU3_MEMHOT_IN_N", + "H_LVT3_CPU3_MEMHOT_OUT_N", "H_LVT3_CPU3_MEMTRIP_OUT_N", + "H_LVT3_CPU3_THERMTRIP_OUT_N", "", + "H_LVT3_CPU3_NMI", "FM_S3M_CPU3_CD_INIT_ERROR", + /* GPORT5 */ + "FM_CPU3_PKG_ID0", "FM_CPU3_PKG_ID1", + "FM_CPU3_PROC_ID0", "FM_CPU3_PROC_ID1"; + + pinctrl-0 = <&U62110_pins>; + pinctrl-names = "default"; + U62110_pins: cfg-pins { + pins = "gp10", "gp11", "gp12", "gp13", "gp14"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pvccinfaon-pvccfa-cpu3@58 { + compatible = "mps,mp2971"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccinfaon_cpu3: vout0 { + regulator-name = "pvccinfaon_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_cpu3: vout1 { + regulator-name = "pvccfa_ehv_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + tda38640-pvnn-main-cpu3@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu3: vout { + regulator-name = "pvnn_main_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mp2973-pvccin-pvccfa-cpu3@58 { + compatible = "mps,mp2973"; + reg = <0x58>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvccin_cpu3: vout0 { + regulator-name = "pvccin_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + pvccfa_ehv_fivra_cpu3: vout1 { + regulator-name = "pvccfa_ehv_fivra_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvccd-hv-cpu3@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + infineon,en-pin-fixed-level; + + regulators { + pvccd_hv_cpu3: vout { + regulator-name = "pvccd_hv_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + tda38640-pvpp-hbm-cpu3@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + interrupt-parent = <&smb_pex_cpu3_event>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvpp_hbm_cpu3: vout { + regulator-name = "pvpp_hbm_cpu3"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c15 { + status = "okay"; + + i2cmux14: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux15: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 11 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux16: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux17: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 0 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux18: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux19: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_rssd17_32: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&bmc_pex_irq>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&bmc_pex_irq 19 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <48 12>; + + gpio-line-names = + /* GPORT0 */ + "RSSD17_SMBRST_N", "RSSD18_SMBRST_N", + "RSSD19_SMBRST_N", "RSSD20_SMBRST_N", + "RSSD21_SMBRST_N", "RSSD22_SMBRST_N", + "RSSD23_SMBRST_N", "RSSD24_SMBRST_N", + /* GPORT1 */ + "RSSD25_SMBRST_N", "RSSD26_SMBRST_N", + "RSSD27_SMBRST_N", "RSSD28_SMBRST_N", + "RSSD29_SMBRST_N", "RSSD30_SMBRST_N", + "RSSD31_SMBRST_N", "RSSD32_SMBRST_N", + /* GPORT2 */ + "RSSD17_PWRDIS", "RSSD18_PWRDIS", + "RSSD19_PWRDIS", "RSSD20_PWRDIS", + /* GPORT3 */ + "RSSD21_PWRDIS", "RSSD22_PWRDIS", + "RSSD23_PWRDIS", "RSSD24_PWRDIS", + "RSSD25_PWRDIS", "RSSD26_PWRDIS", + "RSSD27_PWRDIS", "RSSD28_PWRDIS", + /* GPORT4 */ + "RSSD29_PWRDIS", "RSSD30_PWRDIS", + "RSSD31_PWRDIS", "RSSD32_PWRDIS", + "RSSD17_RESET_N", "RSSD18_RESET_N", + "RSSD19_RESET_N", "RSSD20_RESET_N", + /* GPORT5 */ + "RSSD21_RESET_N", "RSSD22_RESET_N", + "RSSD23_RESET_N", "RSSD24_RESET_N", + "RSSD25_RESET_N", "RSSD26_RESET_N", + "RSSD27_RESET_N", "RSSD28_RESET_N", + /* GPORT6 */ + "RSSD29_RESET_N", "RSSD30_RESET_N", + "RSSD31_RESET_N", "RSSD32_RESET_N", + "", "", + "", "", + /* GPORT7 */ + "", "", + "", "", + "", "", + "", ""; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux20: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 4 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux21: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; +}; + +&i2c8 { + status = "okay"; + + i2cmux5: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 0) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux6: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux7: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux8: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux9: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux10: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + smb_pex_rssd_01_16: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&bmc_pex_irq>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + vdd-supply = <&p3v3_aux>; + reset-gpios = <&bmc_pex_irq 18 GPIO_ACTIVE_HIGH>; + + gpio-reserved-ranges = <48 12>; + + gpio-line-names = + /* GPORT0 */ + "RSSD01_SMBRST_N", "RSSD02_SMBRST_N", + "RSSD03_SMBRST_N", "RSSD04_SMBRST_N", + "RSSD05_SMBRST_N", "RSSD06_SMBRST_N", + "RSSD07_SMBRST_N", "RSSD08_SMBRST_N", + /* GPORT1 */ + "RSSD09_SMBRST_N", "RSSD10_SMBRST_N", + "RSSD11_SMBRST_N", "RSSD12_SMBRST_N", + "RSSD13_SMBRST_N", "RSSD14_SMBRST_N", + "RSSD15_SMBRST_N", "RSSD16_SMBRST_N", + /* GPORT2 */ + "RSSD01_PWRDIS", "RSSD02_PWRDIS", + "RSSD03_PWRDIS", "RSSD04_PWRDIS", + /* GPORT3 */ + "RSSD05_PWRDIS", "RSSD06_PWRDIS", + "RSSD07_PWRDIS", "RSSD08_PWRDIS", + "RSSD09_PWRDIS", "RSSD10_PWRDIS", + "RSSD11_PWRDIS", "RSSD12_PWRDIS", + /* GPORT4 */ + "RSSD13_PWRDIS", "RSSD14_PWRDIS", + "RSSD15_PWRDIS", "RSSD16_PWRDIS", + "RSSD01_RESET_N", "RSSD02_RESET_N", + "RSSD03_RESET_N", "RSSD04_RESET_N", + /* GPORT5 */ + "RSSD05_RESET_N", "RSSD06_RESET_N", + "RSSD07_RESET_N", "RSSD08_RESET_N", + "RSSD09_RESET_N", "RSSD10_RESET_N", + "RSSD11_RESET_N", "RSSD12_RESET_N", + /* GPORT6 */ + "RSSD13_RESET_N", "RSSD14_RESET_N", + "RSSD15_RESET_N", "RSSD16_RESET_N", + "", "", + "", "", + /* GPORT7 */ + "", "", + "", "", + "", "", + "", ""; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux11: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmux12: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&bmc_pex_irq 14 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_aux>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; +}; + +&i2c13 { + status = "okay"; + + i2cmux23: mux@77 { + compatible = "maxim,max7357"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio0 ASPEED_GPIO(R, 4) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_bmc_aux>; + }; +}; + +&i2cmux23 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + smb_pex_vr_ctrl: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 2) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 2) GPIO_ACTIVE_HIGH>; + gpio-line-names = + /* GPORT0 */ + "BCM0_INPUT_DISABLE_N", "SMB_VR_P3V3_AUX_ALERT_N", + "SMB_PEX_CPU1_EVENT_INT", "SMB_PEX_CPU2_EVENT_INT", + "DPIC0_VOLTAGE_DETECTB_N", "DPIC0_VOLTAGE_DETECTA_N", + "DPIC1_VOLTAGE_DETECTA_N", "DPIC1_VOLTAGE_DETECTB_N", + /* GPORT1 */ + "SMB_PEX_NIC_INT", "SMB_VR_P1V05_PCH_AUX_ALERT_N", + "SMB_PEX_CPU0_EVENT_INT", "SMB_PEX_CPU3_EVENT_INT", + "LED_ID_TPM", "PLUG_DETECT_TPM", + "PLUG_DETECT_M2_SSD_CARRIER1", "RST_M2_SSD1_PERST_N", + /* GPORT2 */ + "LED_ID_BAT", "LED_ID_MGMT_PORT2", + "LED_ID_MGMT_PORT1", "SMB_VR_P5V_AUX_ALERT_N", + /* GPORT3 */ + "SMB_VR_AUX_SSB_ALERT_N", "BCM1_INPUT_DISABLE_N", + "LED_ID_NIC1_PORT1", "LED_ID_NIC1_PORT2", + "LED_ID_NIC2_PORT1", "LED_ID_NIC2_PORT2", + "RST_M2_SSD2_PERST_N", "PLUG_DETECT_M2_SSD2", + /* GPORT4 */ + "PLUG_DETECT_BAT", "PLUG_DETECT_M2_SSD1", + "M2_SSD1_SSB_ALERT_N", "BCM2_INPUT_DISABLE_N", + "SMB_VR_P1V8_PCH_AUX_ALERT_N", "BCM3_INPUT_DISABLE_N", + "LED_PWR_DWR_BACK", "LED_ID_DWR_BACK_P", + /* GPORT5 */ + "LED_ID_M2_SSD2", "LED_ID_M2_SSD1", + "PLUG_DETECT_M2_SSD_CARRIER2", "M2_SSD2_SSB_ALERT_N"; + + pinctrl-0 = <&U62120_input &U62120_input_pullup>; + pinctrl-names = "default"; + U62120_input: input-pins { + pins = "gp10"; + function = "gpio"; + input-enable; + bias-disable; + }; + U62120_input_pullup: input-pullup-pins { + pins = "gp01", "gp02", "gp03", "gp11", "gp12", "gp13", + "gp23", "gp30", "gp40", "gp42", "gp44", "gp53"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + bmc_pex_irq: pinctrl@20 { + compatible = "cypress,cy8c9520"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 0) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 1) GPIO_ACTIVE_HIGH>; + gpio-line-names = + /* GPORT0 */ + "SMB_MUX_PWM_FANGRP2_RST_INT_N", "SMB_MUX_SSB_FANGRP2_RST_INT_N", + "SMB_MUX_PWM_FANGRP1_RST_INT_N", "SMB_MUX_SSB_RSSD01_08_RST_INT_N", + "SMB_MUX_RSSD01_08_RST_INT_N", "SMB_MUX_RSSD09_16_RST_INT_N", + "SMB_PEX_RSSD01_16_INT", "SMB_MUX_SSB_FANGRP1_RST_INT_N", + /* GPORT1 */ + "SMB_SVC_PEX_FAN_ALERT_INT", "SMB_MUX_SSB_RSSD09_16_RST_INT_N", + "SMB_MUX_SSB_RSSD17_24_RST_INT_N", "SMB_MUX_PWM_FANGRP0_RST_INT_N", + "SMB_MUX_RSSD17_24_RST_INT_N", "SMB_PEX_RSSD17_32_INT", + "SMB_MUX_RSSD25_32_RST_INT_N", "SMB_MUX_SSB_RSSD25_32_RST_INT_N", + /* GPORT2 */ + "SMB_MUX_SSB_FANGRP0_RST_INT_N", "PEX_FAN_ALERT_RST", + "PEX_RSSD01_16_RST", "PEX_RSSD17_32_RST"; + pinctrl-0 = <&U60000_pins>; + pinctrl-names = "default"; + U60000_pins: cfg-pins { + pins = "gp06", "gp10", "gp15"; + function = "gpio"; + input-enable; + bias-disable; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + i2cmux24: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&p3v3_bmc_aux>; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + vcc-supply = <&p3v3_bmc_aux>; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + i2cmux25: mux@70 { + compatible = "maxim,max7357"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2cmux25 { + reset-gpios = <&gpio0 ASPEED_GPIO(R, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&p3v3_bmc_aux>; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + p5v_aux: ir38263-p5v-aux@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + regulator-name = "p5v_aux"; + regulator-enable-ramp-delay = <2000>; + vin-supply = <&p12v>; + vbus-supply = <&p3v3_bmc_aux>; + regulator-always-on; + regulator-boot-on; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + p3v3_aux: ir38263-p3v3-aux@40 { + compatible = "infineon,ir38263"; + reg = <0x40>; + + vin-supply = <&p12v>; + regulator-name = "p3v3_aux"; + /* + * 2msec for regulator + 18msec for board capacitance + * Note: Every IC has a PTC which slowly charges the bypass + * cap. + */ + regulator-enable-ramp-delay = <200000>; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + aux_ssb: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_pex_vr_ctrl>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + vss1-supply = <&p5v_aux>; + vss2-supply = <&p3v3_aux>; + regulators { + p5v: sw0 { + regulator-name = "p5v"; + shunt-resistor-micro-ohms = <12000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <100000>; + }; + p3v3_pch: sw1 { + regulator-name = "p3v3_pch"; + shunt-resistor-micro-ohms = <12000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <100000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + pli1209bc_p12v_a: regulator@5f { + compatible = "vicor,pli1209bc"; + reg = <0x5f>; + regulators { + p12v_a: vout2 { + regulator-name = "bcm0"; + regulator-boot-on; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + pli1209bc_p12v_b: regulator@5f { + compatible = "vicor,pli1209bc"; + reg = <0x5f>; + regulators { + p12v_b: vout2 { + regulator-name = "bcm1"; + regulator-boot-on; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + pli1209bc_p12v_c: regulator@5f { + compatible = "vicor,pli1209bc"; + reg = <0x5f>; + regulators { + p12v_c: vout2 { + regulator-name = "bcm2"; + regulator-boot-on; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + pli1209bc_p12v_d: regulator@5f { + compatible = "vicor,pli1209bc"; + reg = <0x5f>; + regulators { + p12v_d: vout2 { + regulator-name = "bcm3"; + regulator-boot-on; + }; + }; + }; + }; +}; + +&i2cmux24 { + + reset-gpios = <&gpio0 ASPEED_GPIO(P, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + smb_svc_pex_rssd01_16: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&smb_svc_pex_cpu0_led 17 GPIO_ACTIVE_HIGH>; + gpio-line-names = + /* GPORT0 */ + "LED_ID_RSSD01", "LED_ID_RSSD02", + "LED_ID_RSSD03", "LED_ID_RSSD04", + "LED_ID_RSSD05", "LED_ID_RSSD06", + "LED_ID_RSSD07", "LED_ID_RSSD08", + /* GPORT1 */ + "LED_ID_RSSD09", "LED_ID_RSSD10", + "LED_ID_RSSD11", "LED_ID_RSSD12", + "LED_ID_RSSD13", "LED_ID_RSSD14", + "LED_ID_RSSD15", "LED_ID_RSSD16", + /* GPORT2 */ + "RSSD01_PRESENT_N", "RSSD02_PRESENT_N", + "RSSD03_PRESENT_N", "RSSD04_PRESENT_N", + /* GPORT3 */ + "RSSD05_PRESENT_N", "RSSD06_PRESENT_N", + "RSSD07_PRESENT_N", "RSSD08_PRESENT_N", + "RSSD09_PRESENT_N", "RSSD10_PRESENT_N", + "RSSD11_PRESENT_N", "RSSD12_PRESENT_N", + /* GPORT4 */ + "RSSD13_PRESENT_N", "RSSD14_PRESENT_N", + "RSSD15_PRESENT_N", "RSSD16_PRESENT_N", + "LED_ID_FAN_ASM01", "LED_ID_FAN_ASM02", + "LED_ID_FAN_ASM03", "LED_ID_FAN_ASM04", + /* GPORT5 */ + "LED_ID_FAN_ASM05", "LED_ID_FAN_ASM06", + "PLUG_DETECT_FAN_ASM01", "PLUG_DETECT_FAN_ASM02", + "PLUG_DETECT_FAN_ASM03", "PLUG_DETECT_FAN_ASM04", + "PLUG_DETECT_FAN_ASM05", "PLUG_DETECT_FAN_ASM06", + /* GPORT6 */ + "SSB_RSSD01_ALERT_N", "SSB_RSSD02_ALERT_N", + "SSB_RSSD03_ALERT_N", "SSB_RSSD04_ALERT_N", + "SSB_RSSD05_ALERT_N", "SSB_RSSD06_ALERT_N", + "SSB_RSSD07_ALERT_N", "SSB_RSSD08_ALERT_N", + /* GPORT7 */ + "SSB_RSSD09_ALERT_N", "SSB_RSSD10_ALERT_N", + "SSB_RSSD11_ALERT_N", "SSB_RSSD12_ALERT_N", + "SSB_RSSD13_ALERT_N", "SSB_RSSD14_ALERT_N", + "SSB_RSSD15_ALERT_N", "SSB_RSSD16_ALERT_N"; + pinctrl-0 = <&U65200_pins>; + pinctrl-names = "default"; + U65200_pins: cfg-pins { + pins = "gp60", "gp61", "gp62", + "gp63", "gp64", "gp65", "gp66", + "gp67", "gp70", "gp71", "gp72", + "gp73", "gp74", "gp75", "gp76", "gp77"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_rssd17_32: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(H, 0) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&smb_svc_pex_cpu1_led 17 GPIO_ACTIVE_HIGH>; + gpio-line-names = + /* GPORT0 */ + "LED_ID_RSSD17", "LED_ID_RSSD18", + "LED_ID_RSSD19", "LED_ID_RSSD20", + "LED_ID_RSSD21", "LED_ID_RSSD22", + "LED_ID_RSSD23", "LED_ID_RSSD24", + /* GPORT1 */ + "LED_ID_RSSD25", "LED_ID_RSSD26", + "LED_ID_RSSD27", "LED_ID_RSSD28", + "LED_ID_RSSD29", "LED_ID_RSSD30", + "LED_ID_RSSD31", "LED_ID_RSSD32", + /* GPORT2 */ + "RSSD17_PRESENT_N", "RSSD18_PRESENT_N", + "RSSD19_PRESENT_N", "RSSD20_PRESENT_N", + /* GPORT3 */ + "RSSD21_PRESENT_N", "RSSD22_PRESENT_N", + "RSSD23_PRESENT_N", "RSSD24_PRESENT_N", + "RSSD25_PRESENT_N", "RSSD26_PRESENT_N", + "RSSD27_PRESENT_N", "RSSD28_PRESENT_N", + /* GPORT4 */ + "RSSD29_PRESENT_N", "RSSD30_PRESENT_N", + "RSSD31_PRESENT_N", "RSSD32_PRESENT_N", + "LED_ID_FAN_ASM07", "LED_ID_FAN_ASM08", + "LED_ID_FAN_ASM09", "LED_ID_FAN_ASM10", + /* GPORT5 */ + "LED_ID_FAN_ASM11", "LED_ID_FAN_ASM12", + "PLUG_DETECT_FAN_ASM07", "PLUG_DETECT_FAN_ASM08", + "PLUG_DETECT_FAN_ASM09", "PLUG_DETECT_FAN_ASM10", + "PLUG_DETECT_FAN_ASM11", "PLUG_DETECT_FAN_ASM12", + /* GPORT6 */ + "SSB_RSSD17_ALERT_N", "SSB_RSSD18_ALERT_N", + "SSB_RSSD19_ALERT_N", "SSB_RSSD20_ALERT_N", + "SSB_RSSD21_ALERT_N", "SSB_RSSD22_ALERT_N", + "SSB_RSSD23_ALERT_N", "SSB_RSSD24_ALERT_N", + /* GPORT7 */ + "SSB_RSSD25_ALERT_N", "SSB_RSSD26_ALERT_N", + "SSB_RSSD27_ALERT_N", "SSB_RSSD28_ALERT_N", + "SSB_RSSD29_ALERT_N", "SSB_RSSD30_ALERT_N", + "SSB_RSSD31_ALERT_N", "SSB_RSSD32_ALERT_N"; + pinctrl-0 = <&U65300_pins>; + pinctrl-names = "default"; + U65300_pins: cfg-pins { + pins = "gp60", "gp61", "gp62", + "gp63", "gp64", "gp65", "gp66", + "gp67", "gp70", "gp71", "gp72", + "gp73", "gp74", "gp75", "gp76", + "gp77"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_cpu1_led: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 6) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <18 2>, <36 2>; + gpio-line-names = + /* GPORT0 */ + "PLUG_DETECT_DIMM_C1E2", "PLUG_DETECT_DIMM_C1E1", + "PLUG_DETECT_DIMM_C1F2", "PLUG_DETECT_DIMM_C1F1", + "PLUG_DETECT_DIMM_C1G2", "PLUG_DETECT_DIMM_C1G1", + "PLUG_DETECT_DIMM_C1H2", "PLUG_DETECT_DIMM_C1H1", + /* GPORT1 */ + "PLUG_DETECT_DIMM_C1D1", "PLUG_DETECT_DIMM_C1D2", + "PLUG_DETECT_DIMM_C1C1", "PLUG_DETECT_DIMM_C1C2", + "PLUG_DETECT_DIMM_C1B1", "PLUG_DETECT_DIMM_C1B2", + "PLUG_DETECT_DIMM_C1A1", "PLUG_DETECT_DIMM_C1A2", + /* GPORT2 */ + "PEX_CPU1_EVENT_RST", "SVC_PEX_RSSD17_32_RST", + "", "", + /* GPORT3 */ + "LED_ID_DIMM_C1E2", "LED_ID_DIMM_C1E1", + "LED_ID_DIMM_C1F2", "LED_ID_DIMM_C1F1", + "LED_ID_DIMM_C1G2", "LED_ID_DIMM_C1G1", + "LED_ID_DIMM_C1H2", "LED_ID_DIMM_C1H1", + /* GPORT4 */ + "LED_ID_DIMM_C1A2", "LED_ID_DIMM_C1A1", + "LED_ID_DIMM_C1B2", "LED_ID_DIMM_C1B1", + "LED_ID_DIMM_C1C2", "LED_ID_DIMM_C1C1", + "LED_ID_DIMM_C1D2", "LED_ID_DIMM_C1D1", + /* GPORT5 */ + "", "", + "FM_CPU1_SKTOCC_N", "LED_ID_CPU1"; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_fan_alert: pinctrl@20 { + compatible = "cypress,cy8c9560"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&bmc_pex_irq>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_aux>; + reset-gpios = <&bmc_pex_irq 17 GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <24 3>, <51 9>; + gpio-line-names = + /* GPORT0 */ + "FAN01_SSB_ALERT_N", "FAN02_SSB_ALERT_N", + "FAN03_SSB_ALERT_N", "FAN04_SSB_ALERT_N", + "FAN05_SSB_ALERT_N", "FAN06_SSB_ALERT_N", + "FAN07_SSB_ALERT_N", "FAN08_SSB_ALERT_N", + /* GPORT1 */ + "FAN09_SSB_ALERT_N", "FAN10_SSB_ALERT_N", + "FAN11_SSB_ALERT_N", "FAN12_SSB_ALERT_N", + "FAN13_SSB_ALERT_N", "FAN14_SSB_ALERT_N", + "FAN15_SSB_ALERT_N", "FAN16_SSB_ALERT_N", + /* GPORT2 */ + "FAN17_SSB_ALERT_N", "FAN18_SSB_ALERT_N", + "FAN19_SSB_ALERT_N", "FAN20_SSB_ALERT_N", + /* GPORT3 */ + "FAN21_SSB_ALERT_N", "FAN22_SSB_ALERT_N", + "FAN23_SSB_ALERT_N", "FAN24_SSB_ALERT_N", + "", "", + "", "FAN01_PWM_ALERT_N", + /* GPORT4 */ + "FAN02_PWM_ALERT_N", "FAN03_PWM_ALERT_N", + "FAN04_PWM_ALERT_N", "FAN05_PWM_ALERT_N", + "FAN06_PWM_ALERT_N", "FAN07_PWM_ALERT_N", + "FAN08_PWM_ALERT_N", "FAN09_PWM_ALERT_N", + /* GPORT5 */ + "FAN10_PWM_ALERT_N", "FAN11_PWM_ALERT_N", + "FAN12_PWM_ALERT_N", "FAN13_PWM_ALERT_N", + "FAN14_PWM_ALERT_N", "FAN15_PWM_ALERT_N", + "FAN16_PWM_ALERT_N", "FAN17_PWM_ALERT_N", + /* GPORT6 */ + "FAN18_PWM_ALERT_N", "FAN19_PWM_ALERT_N", + "FAN20_PWM_ALERT_N", "FAN21_PWM_ALERT_N", + "FAN22_PWM_ALERT_N", "FAN23_PWM_ALERT_N", + "FAN24_PWM_ALERT_N", "", + /* GPORT7 */ + "", "", + "", "", + "", "", + "", ""; + pinctrl-0 = <&U65600_pins>; + pinctrl-names = "default"; + U65600_pins: cfg-pins { + pins = "gp00", "gp01", "gp02", + "gp03", "gp04", "gp05", "gp06", + "gp07", "gp10", "gp11", "gp12", + "gp13", "gp14", "gp15", "gp16", + "gp17", "gp20", "gp21", "gp22", + "gp23", "gp30", "gp31", "gp32", + "gp33", "gp37", "gp40", "gp41", + "gp42", "gp43", "gp44", "gp45", + "gp46", "gp47", "gp50", "gp51", + "gp52", "gp53", "gp54", "gp55", + "gp56", "gp57", "gp60", "gp61", + "gp62", "gp63", "gp64", "gp65", + "gp66"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_cpu2_led: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 5) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <17 3>, <36 2>; + gpio-line-names = + /* GPORT0 */ + "PLUG_DETECT_DIMM_C2E2", "PLUG_DETECT_DIMM_C2E1", + "PLUG_DETECT_DIMM_C2F2", "PLUG_DETECT_DIMM_C2F1", + "PLUG_DETECT_DIMM_C2G2", "PLUG_DETECT_DIMM_C2G1", + "PLUG_DETECT_DIMM_C2H2", "PLUG_DETECT_DIMM_C2H1", + /* GPORT1 */ + "PLUG_DETECT_DIMM_C2D1", "PLUG_DETECT_DIMM_C2D2", + "PLUG_DETECT_DIMM_C2C1", "PLUG_DETECT_DIMM_C2C2", + "PLUG_DETECT_DIMM_C2B1", "PLUG_DETECT_DIMM_C2B2", + "PLUG_DETECT_DIMM_C2A1", "PLUG_DETECT_DIMM_C2A2", + /* GPORT2 */ + "PEX_CPU2_EVENT_RST", "", + "", "", + /* GPORT3 */ + "LED_ID_DIMM_C2E2", "LED_ID_DIMM_C2E1", + "LED_ID_DIMM_C2F2", "LED_ID_DIMM_C2F1", + "LED_ID_DIMM_C2G2", "LED_ID_DIMM_C2G1", + "LED_ID_DIMM_C2H2", "LED_ID_DIMM_C2H1", + /* GPORT4 */ + "LED_ID_DIMM_C2A2", "LED_ID_DIMM_C2A1", + "LED_ID_DIMM_C2B2", "LED_ID_DIMM_C2B1", + "LED_ID_DIMM_C2C2", "LED_ID_DIMM_C2C1", + "LED_ID_DIMM_C2D2", "LED_ID_DIMM_C2D1", + /* GPORT5 */ + "", "", + "FM_CPU2_SKTOCC_N", "LED_ID_CPU2"; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + smb_svc_pex_cpu3_led: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(V, 3) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <17 3>; + gpio-line-names = + /* GPORT0 */ + "PLUG_DETECT_DIMM_C3E2", "PLUG_DETECT_DIMM_C3E1", + "PLUG_DETECT_DIMM_C3F2", "PLUG_DETECT_DIMM_C3F1", + "PLUG_DETECT_DIMM_C3G2", "PLUG_DETECT_DIMM_C3G1", + "PLUG_DETECT_DIMM_C3H2", "PLUG_DETECT_DIMM_C3H1", + /* GPORT1 */ + "PLUG_DETECT_DIMM_C3D1", "PLUG_DETECT_DIMM_C3D2", + "PLUG_DETECT_DIMM_C3C1", "PLUG_DETECT_DIMM_C3C2", + "PLUG_DETECT_DIMM_C3B1", "PLUG_DETECT_DIMM_C3B2", + "PLUG_DETECT_DIMM_C3A1", "PLUG_DETECT_DIMM_C3A2", + /* GPORT2 */ + "PEX_CPU3_EVENT_RST", "", + "", "", + /* GPORT3 */ + "LED_ID_DIMM_C3E2", "LED_ID_DIMM_C3E1", + "LED_ID_DIMM_C3F2", "LED_ID_DIMM_C3F1", + "LED_ID_DIMM_C3G2", "LED_ID_DIMM_C3G1", + "LED_ID_DIMM_C3H2", "LED_ID_DIMM_C3H1", + /* GPORT4 */ + "LED_ID_DIMM_C3A2", "LED_ID_DIMM_C3A1", + "LED_ID_DIMM_C3B2", "LED_ID_DIMM_C3B1", + "LED_ID_DIMM_C3C2", "LED_ID_DIMM_C3C1", + "LED_ID_DIMM_C3D2", "LED_ID_DIMM_C3D1", + /* GPORT5 */ + "LED_PWR_DWR_FRNT", "LED_ID_DWR_FRNT_P", + "FM_CPU3_SKTOCC_N", "LED_ID_CPU3"; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + smb_svc_pex_cpu0_led: pinctrl@20 { + compatible = "cypress,cy8c9540"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(O, 3) IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + vdd-supply = <&p3v3_bmc_aux>; + reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; + gpio-reserved-ranges = <18 2>, <36 2>; + gpio-line-names = + /* GPORT0 */ + "PLUG_DETECT_DIMM_C0E2", "PLUG_DETECT_DIMM_C0E1", + "PLUG_DETECT_DIMM_C0F2", "PLUG_DETECT_DIMM_C0F1", + "PLUG_DETECT_DIMM_C0G2", "PLUG_DETECT_DIMM_C0G1", + "PLUG_DETECT_DIMM_C0H2", "PLUG_DETECT_DIMM_C0H1", + /* GPORT1 */ + "PLUG_DETECT_DIMM_C0D1", "PLUG_DETECT_DIMM_C0D2", + "PLUG_DETECT_DIMM_C0C1", "PLUG_DETECT_DIMM_C0C2", + "PLUG_DETECT_DIMM_C0B1", "PLUG_DETECT_DIMM_C0B2", + "PLUG_DETECT_DIMM_C0A1", "PLUG_DETECT_DIMM_C0A2", + /* GPORT2 */ + "PEX_CPU0_EVENT_RST", "SVC_PEX_RSSD01_16_RST", + "", "", + /* GPORT3 */ + "LED_ID_DIMM_C0E2", "LED_ID_DIMM_C0E1", + "LED_ID_DIMM_C0F2", "LED_ID_DIMM_C0F1", + "LED_ID_DIMM_C0G2", "LED_ID_DIMM_C0G1", + "LED_ID_DIMM_C0H2", "LED_ID_DIMM_C0H1", + /* GPORT4 */ + "LED_ID_DIMM_C0A2", "LED_ID_DIMM_C0A1", + "LED_ID_DIMM_C0B2", "LED_ID_DIMM_C0B1", + "LED_ID_DIMM_C0C2", "LED_ID_DIMM_C0C1", + "LED_ID_DIMM_C0D2", "LED_ID_DIMM_C0D1", + /* GPORT5 */ + "", "", + "FM_CPU0_SKTOCC_N", "LED_ID_CPU0"; + }; + }; +}; + +&i2c9 { + status = "okay"; + + p1v2_bmc_aux_mon: pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + max8952,default-mode = <3>; + max8952,dvs-mode-microvolt = <1100000>, <1100000>, + <1100000>, <1100000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2cmux8 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + fan10_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan10_ssb: sw0 { + regulator-name = "fan10_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + fan12_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan12_ssb: sw0 { + regulator-name = "fan12_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fan14_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan14_ssb: sw0 { + regulator-name = "fan14_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + fan16_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan16_ssb: sw0 { + regulator-name = "fan16_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + fan18_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan18_ssb: sw0 { + regulator-name = "fan18_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fan20_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan20_ssb: sw0 { + regulator-name = "fan20_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fan22_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan22_ssb: sw0 { + regulator-name = "fan22_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fan24_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan24_ssb: sw0 { + regulator-name = "fan24_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux7 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + fan17_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan17_ssb: sw0 { + regulator-name = "fan17_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + fan19_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan19_ssb: sw0 { + regulator-name = "fan19_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fan21_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan21_ssb: sw0 { + regulator-name = "fan21_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + fan23_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan23_ssb: sw0 { + regulator-name = "fan23_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + fan02_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan02_ssb: sw0 { + regulator-name = "fan02_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fan04_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan04_ssb: sw0 { + regulator-name = "fan04_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fan06_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan06_ssb: sw0 { + regulator-name = "fan06_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fan08_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan08_ssb: sw0 { + regulator-name = "fan08_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux6 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + fan01_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan01_ssb: sw0 { + regulator-name = "fan01_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + fan03_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan03_ssb: sw0 { + regulator-name = "fan03_supply"; + + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fan05_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan05_ssb: sw0 { + regulator-name = "fan05_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + fan07_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan07_ssb: sw0 { + regulator-name = "fan07_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + fan09_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan09_ssb: sw0 { + regulator-name = "fan09_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fan11_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan11_ssb: sw0 { + regulator-name = "fan11_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fan13_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan13_ssb: sw0 { + regulator-name = "fan13_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fan15_ssb: regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p12v>; + interrupt-parent = <&smb_svc_pex_fan_alert>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + + regulators { + sw0_fan15_ssb: sw0 { + regulator-name = "fan15_supply"; + shunt-resistor-micro-ohms = <10000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <3400000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + + }; +}; + +&i2cmux9 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd19: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <46 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd19:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd19: sw0 { + regulator-name = "rssd19_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd19: sw1 { + regulator-name = "rssd19_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd18: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd18:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd18: sw0 { + regulator-name = "rssd18_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd18: sw1 { + regulator-name = "rssd18_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd17: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <44 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd17:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd17: sw0 { + regulator-name = "rssd17_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd17: sw1 { + regulator-name = "rssd17_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd20: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <47 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd20:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd20: sw0 { + regulator-name = "rssd20_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd20: sw1 { + regulator-name = "rssd20_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd21: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <48 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd21:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd21: sw0 { + regulator-name = "rssd21_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd21: sw1 { + regulator-name = "rssd21_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd22: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <49 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd22:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd22: sw0 { + regulator-name = "rssd22_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd22: sw1 { + regulator-name = "rssd22_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd24: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <51 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd24:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd24: sw0 { + regulator-name = "rssd24_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd24: sw1 { + regulator-name = "rssd24_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd23: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <50 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd23:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd23: sw0 { + regulator-name = "rssd23_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd23: sw1 { + regulator-name = "rssd23_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux10 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd25: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <52 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd25:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd25: sw0 { + regulator-name = "rssd25_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd25: sw1 { + regulator-name = "rssd25_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd26: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <53 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd26:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd26: sw0 { + regulator-name = "rssd26_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd26: sw1 { + regulator-name = "rssd26_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd27: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <54 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd27:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd27: sw0 { + regulator-name = "rssd27_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd27: sw1 { + regulator-name = "rssd27_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd32: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <59 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd32:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd32: sw0 { + regulator-name = "rssd32_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd32: sw1 { + regulator-name = "rssd32_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd31: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <58 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd31:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd31: sw0 { + regulator-name = "rssd31_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd31: sw1 { + regulator-name = "rssd31_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd30: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <57 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd30:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd30: sw0 { + regulator-name = "rssd30_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd30: sw1 { + regulator-name = "rssd30_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd29: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd29:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd29: sw0 { + regulator-name = "rssd29_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd29: sw1 { + regulator-name = "rssd29_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd28: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd17_32>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd28:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd28: sw0 { + regulator-name = "rssd28_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd28: sw1 { + regulator-name = "rssd28_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux18 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd03: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <46 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd03:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd03: sw0 { + regulator-name = "rssd03_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd03: sw1 { + regulator-name = "rssd03_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd02: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd02:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd02: sw0 { + regulator-name = "rssd02_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd02: sw1 { + regulator-name = "rssd02_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd01: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <44 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd01:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd01: sw0 { + regulator-name = "rssd01_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd01: sw1 { + regulator-name = "rssd01_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd04: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <47 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd04:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd04: sw0 { + regulator-name = "rssd04_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd04: sw1 { + regulator-name = "rssd04_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd05: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <48 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd05:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd05: sw0 { + regulator-name = "rssd05_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd05: sw1 { + regulator-name = "rssd05_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd08: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <51 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd08:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd08: sw0 { + regulator-name = "rssd08_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd08: sw1 { + regulator-name = "rssd08_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd07: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <50 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd07:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd07: sw0 { + regulator-name = "rssd07_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd07: sw1 { + regulator-name = "rssd07_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd06: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <49 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd06:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd06: sw0 { + regulator-name = "rssd06_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd06: sw1 { + regulator-name = "rssd06_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; + +&i2cmux19 { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd14: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <57 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd14:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd14: sw0 { + regulator-name = "rssd14_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd14: sw1 { + regulator-name = "rssd14_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd13: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd13:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd13: sw0 { + regulator-name = "rssd13_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd13: sw1 { + regulator-name = "rssd13_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd12: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd12:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd12: sw0 { + regulator-name = "rssd12_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd12: sw1 { + regulator-name = "rssd12_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd11: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <54 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd11:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd11: sw0 { + regulator-name = "rssd11_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd11: sw1 { + regulator-name = "rssd11_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd10: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <53 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd10:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd10: sw0 { + regulator-name = "rssd10_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd10: sw1 { + regulator-name = "rssd10_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd09: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <52 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd09:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd09: sw0 { + regulator-name = "rssd09_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd09: sw1 { + regulator-name = "rssd09_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd15: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <58 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd15:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd15: sw0 { + regulator-name = "rssd15_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd15: sw1 { + regulator-name = "rssd15_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + ssb_rssd16: regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + interrupt-parent = <&smb_svc_pex_rssd01_16>; + interrupts = <59 IRQ_TYPE_LEVEL_LOW>; + + vss1-supply = <&p3v3_aux>; + vss2-supply = <&p12v>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "rssd16:green:power"; + default-state = "off"; + }; + }; + + regulators { + sw0_ssb_rssd16: sw0 { + regulator-name = "rssd16_12v"; + shunt-resistor-micro-ohms = <9000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <4500000>; + regulator-enable-ramp-delay = <1000>; + }; + sw1_ssb_rssd16: sw1 { + regulator-name = "rssd16_3v3"; + shunt-resistor-micro-ohms = <100000>; + regulator-over-current-protection; + regulator-oc-protection-microamp = <410000>; + regulator-enable-ramp-delay = <1000>; + }; + }; + }; + }; +}; diff --git a/board/aspeed/evb_ast2600/MAINTAINERS b/board/aspeed/evb_ast2600/MAINTAINERS index e83aae5d6a..5368e8ee5f 100644 --- a/board/aspeed/evb_ast2600/MAINTAINERS +++ b/board/aspeed/evb_ast2600/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/aspeed/evb_ast2600/ F: include/configs/evb_ast2600.h F: configs/evb-ast2600_defconfig +F: configs/ibm-sbp1_defconfig diff --git a/configs/ibm-sbp1_defconfig b/configs/ibm-sbp1_defconfig new file mode 100644 index 0000000000..cf667217cc --- /dev/null +++ b/configs/ibm-sbp1_defconfig @@ -0,0 +1,126 @@ +CONFIG_ARM=y +CONFIG_SYS_DCACHE_OFF=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_SPL_SYS_THUMB_BUILD=y +CONFIG_ARCH_ASPEED=y +CONFIG_TEXT_BASE=0x80000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x800 +CONFIG_ASPEED_AST2600=y +CONFIG_TARGET_EVB_AST2600=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_LDSCRIPT="arch/arm/mach-aspeed/ast2600/u-boot-spl.lds" +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0xe0000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="ast2600-sbp1" +CONFIG_DM_RESET=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_STACK_R_ADDR=0x83000000 +CONFIG_SPL_SIZE_LIMIT=0x10000 +CONFIG_SPL=y +# CONFIG_ARMV7_NONSEC is not set +CONFIG_SYS_LOAD_ADDR=0x83000000 +CONFIG_SPL_PAYLOAD="u-boot.img" +CONFIG_BUILD_TARGET="u-boot-with-spl.bin" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_FIT=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200n8 root=/dev/ram rw earlycon" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run bootspi" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y +CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x83000000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000 +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_FIT_IMAGE_TINY=y +CONFIG_SPL_DM_RESET=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 +CONFIG_CMD_BOOTZ=y +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_DHCP=y +CONFIG_BOOTP_BOOTFILESIZE=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_NCSI=y +CONFIG_CMD_EXT4=y +CONFIG_DOS_PARTITION=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_SECT_SIZE_AUTO=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_REGMAP=y +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_ASPEED_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_ASPEED=y +CONFIG_I2C_EEPROM=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ASPEED=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_REALTEK=y +CONFIG_PHY_NCSI=y +CONFIG_DM_MDIO=y +CONFIG_FTGMAC100=y +CONFIG_ASPEED_MDIO=y +CONFIG_PHY=y +CONFIG_PINCTRL=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_SPI_DIRMAP=y +CONFIG_SPI_ASPEED_SMC=y +CONFIG_SYSRESET=y +CONFIG_SPL_SYSRESET=y +CONFIG_WDT=y +CONFIG_SHA384=y +CONFIG_SPL_CRC32=y +CONFIG_HEXDUMP=y +# CONFIG_EFI_LOADER is not set +CONFIG_PHANDLE_CHECK_SEQ=y -- 2.42.0

2 1