September 2024 - U-Boot

[GIT PULL] usb hub changes for 2025.01 next
by Michal Simek 03 Sep '24

03 Sep '24

Hi, please pull these changes to your next branch. Changes have been sent for a while and there was no reply to them. Here is the thread. https://lore.kernel.org/all/20240605100221.3571-1-venkatesh.abbarapu@amd.co… We are doing the same changes on Linux side and they should be merged soon https://lore.kernel.org/all/1725192519-3867920-1-git-send-email-radhey.shya… I also queue them to gitlab CI and can't see any issue. Thanks, Michal The following changes since commit f0ec3e608902ca1f573e5b7017da6bc804483f55: Merge patch series "Add support for Ethernet Boot on SK-AM62" (2024-08-30 15:55:06 -0600) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-microblaze.git tags/usb-hub-for-v2025.01 for you to fetch changes up to 97cbb90a0caa5876bdf0b8d1a0f251f80c9eb77e: arm64: zynqmp: Update the usb5744 hub node as per binding (2024-09-02 09:24:50 +0200) ---------------------------------------------------------------- USB Hub update for v2025.01 next Enhance onboard-hub wit handle usb5744 and it's initialization via i2c also with optional reset. ---------------------------------------------------------------- Venkatesh Yadav Abbarapu (7): usb: onboard-hub: Add reset-gpio support usb: onboard-hub: Fix the return values of regulator APIs usb: onboard-hub: add support for Microchip USB5744 usb: onboard-hub: Add i2c initialization for usb5744 hub usb: onboard-hub: Bail out if peer hub is already probed configs: zynqmp_kria: Enable the USB onboard hub arm64: zynqmp: Update the usb5744 hub node as per binding arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 48 ++++++ arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 48 ++++++ arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 18 ++ arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 25 ++- common/usb_onboard_hub.c | 176 ++++++++++++++++++-- configs/xilinx_zynqmp_kria_defconfig | 1 + 6 files changed, 304 insertions(+), 12 deletions(-)

2 2

[GIT PULL] Please pull u-boot-imx-next-20240902
by Fabio Estevam 03 Sep '24

03 Sep '24

Hi Tom, Please pull from u-boot-imx/next, thanks. The following changes since commit e83ced1a24095de66e526bd6c10f0f24584baaee: bootstage: Fix unstash of records from SPL (2024-08-28 10:07:59 -0600) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-imx.git tags/u-boot-imx-next-20240902 for you to fetch changes up to d1349097222b5a3264f614b3e4fe672e0df26435: ARM: imx: Wrap i.MX config options in MACH_IMX (2024-09-02 13:23:36 -0300) u-boot-imx-next-20240902 ------------------------ CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22211 - Enable SPI NOR flash support and MTD partitions for phycore_imx8mp. - Convert mx6slevk to OF_UPSTREAM and watchdog DM. - Cleanup some mx5/mx6 USB options. - Make PLL settings configurable at board level. - Set CONFIG_SPL_LOAD_FIT_ADDRESS for verdin-imx8m/p. - Make the mxc-gpio reading state of GPIO pins in output mode to be consistent with the Linux kernel. - Add HUK derivation support for ELE AHAB. ---------------------------------------------------------------- Benjamin Hahn (2): configs: phycore-imx8mp_defconfig: Enable SPI NOR flash support board: phytec: phycore_imx8mp: Add mtd spi partitions Fabio Estevam (8): mx6slevk: Convert to watchdog driver model mx6slevk: Fix the boot device number mx6slevk: Keep a single defconfig mx6slevk: Convert to OF_UPSTREAM imx: Remove CFG_MXC_USB_FLAGS usb: ehci-mx5: Add a default for CFG_MXC_USB_PORTSC mx5: Remove CFG_MXC_USB_PORT imx: Remove CFG_MXC_USB_PORTSC Marek Vasut (2): ARM: imx: Make PLL settings configurable at board level ARM: imx: Wrap i.MX config options in MACH_IMX Mathieu Othacehe (1): imx: ele_ahab: Add HUK derivation support Rogerio Guerra Borin (1): configs: verdin-imx8m[mp]: set CONFIG_SPL_LOAD_FIT_ADDRESS Tomas Paukrt (1): gpio: mxc_gpio: fix reading state of GPIO pins in output mode arch/arm/dts/imx6sl-evk.dts | 658 --------------- arch/arm/dts/imx6sl-pinfunc.h | 1073 ------------------------ arch/arm/dts/imx6sl.dtsi | 1005 ---------------------- arch/arm/include/asm/mach-imx/ele_api.h | 2 + arch/arm/mach-imx/Kconfig | 4 + arch/arm/mach-imx/ele_ahab.c | 31 + arch/arm/mach-imx/imx8m/clock_imx8mm.c | 11 +- arch/arm/mach-imx/mx6/Kconfig | 1 + board/phytec/phycore_imx8mp/phycore-imx8mp.c | 34 + board/phytec/phycore_imx8mp/phycore_imx8mp.env | 4 + configs/mx6slevk_defconfig | 7 +- configs/mx6slevk_spinor_defconfig | 71 -- configs/mx6slevk_spl_defconfig | 88 -- configs/phycore-imx8mp_defconfig | 24 + configs/verdin-imx8mm_defconfig | 1 + configs/verdin-imx8mp_defconfig | 1 + drivers/gpio/mxc_gpio.c | 10 +- drivers/misc/imx_ele/ele_api.c | 77 ++ drivers/usb/host/ehci-mx5.c | 4 + include/configs/apalis_imx6.h | 5 - include/configs/aristainetos2.h | 4 - include/configs/brppt2.h | 3 - include/configs/cl-som-imx7.h | 4 - include/configs/cm_fx6.h | 4 - include/configs/colibri-imx6ull.h | 5 - include/configs/colibri_imx6.h | 5 - include/configs/colibri_imx7.h | 5 - include/configs/dart_6ul.h | 4 - include/configs/dh_imx6.h | 4 - include/configs/display5.h | 1 - include/configs/embestmx6boards.h | 4 - include/configs/ge_b1x5v2.h | 4 - include/configs/gw_ventana.h | 4 - include/configs/imx6_logic.h | 6 - include/configs/imx6dl-mamoj.h | 4 - include/configs/imx6q-bosch-acc.h | 2 - include/configs/imx7-cm.h | 3 - include/configs/imx8mm-cl-iot-gate.h | 3 - include/configs/kontron-sl-mx6ul.h | 5 - include/configs/kontron-sl-mx8mm.h | 5 - include/configs/kp_imx53.h | 1 - include/configs/kp_imx6q_tpc.h | 6 - include/configs/liteboard.h | 6 - include/configs/m53menlo.h | 2 - include/configs/meerkat96.h | 3 - include/configs/mx51evk.h | 1 - include/configs/mx53cx9020.h | 2 - include/configs/mx53loco.h | 2 - include/configs/mx53ppd.h | 2 - include/configs/mx6cuboxi.h | 3 - include/configs/mx6memcal.h | 1 - include/configs/mx6sabreauto.h | 4 - include/configs/mx6sabresd.h | 6 - include/configs/mx6slevk.h | 10 +- include/configs/mx6sllevk.h | 5 - include/configs/mx6sxsabreauto.h | 5 - include/configs/mx6sxsabresd.h | 5 - include/configs/mx6ul_14x14_evk.h | 6 - include/configs/mx7dsabresd.h | 3 - include/configs/mx7ulp_com.h | 1 - include/configs/mys_6ulx.h | 4 - include/configs/nitrogen6x.h | 4 - include/configs/novena.h | 6 - include/configs/npi_imx6ull.h | 4 - include/configs/o4-imx6ull-nano.h | 4 - include/configs/opos6uldev.h | 6 - include/configs/pcl063.h | 4 - include/configs/pcl063_ull.h | 4 - include/configs/pico-imx6.h | 4 - include/configs/pico-imx6ul.h | 4 - include/configs/pico-imx7d.h | 4 - include/configs/somlabs_visionsom_6ull.h | 6 - include/configs/tbs2910.h | 5 - include/configs/tqma6.h | 3 - include/configs/usbarmory.h | 2 - include/configs/verdin-imx8mm.h | 3 - include/configs/vining_2000.h | 2 - include/configs/wandboard.h | 4 - include/configs/warp7.h | 1 - include/configs/xpress.h | 4 - 80 files changed, 208 insertions(+), 3134 deletions(-) delete mode 100644 arch/arm/dts/imx6sl-evk.dts delete mode 100644 arch/arm/dts/imx6sl-pinfunc.h delete mode 100644 arch/arm/dts/imx6sl.dtsi delete mode 100644 configs/mx6slevk_spinor_defconfig delete mode 100644 configs/mx6slevk_spl_defconfig

2 1

[GIT PULL] Please pull u-boot-amlogic-next-20240902
by Neil Armstrong 03 Sep '24

03 Sep '24

Hi Tom, A simple set of changes to allow using the bootrom NAND pages, ported from Linux. Thanks, Neil The following changes since commit ee2af844ba1b27b2e959c4e649e4b769fbeb4074: Merge tag 'efi-2024-10-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi (2024-08-24 14:03:28 -0600) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-amlogic.git tags/u-boot-amlogic-next-20240902 for you to fetch changes up to 35ff967a99e97b523732096628bdbc78758922f6: mtd: rawnand: meson: read/write access for boot ROM pages (2024-08-28 16:05:45 +0200) ---------------------------------------------------------------- - meson_nand: R/W support for pages used by boot ROM ---------------------------------------------------------------- Arseniy Krasnov (3): mtd: rawnand: nand_base: support for 'NAND_IS_BOOT_MEDIUM' flag mtd: rawnand: meson: refactor use of 'meson_nfc_cmd_access()' mtd: rawnand: meson: read/write access for boot ROM pages drivers/mtd/nand/raw/meson_nand.c | 84 ++++++++++++++++++++++++++------------- drivers/mtd/nand/raw/nand_base.c | 3 ++ include/linux/mtd/rawnand.h | 5 +++ 3 files changed, 65 insertions(+), 27 deletions(-)

2 1

[PATCH 0/2] arm: zynqmp: Initialize some registers at boot
by Sean Anderson 03 Sep '24

03 Sep '24

These patches are independent in intent, but they modify adjacent lines so I have sent them as a series. Sean Anderson (2): zynqmp: Disable secure access for boot devices arm: zynqmp: Enable non-invasive CCI-400 PMU debug arch/arm/mach-zynqmp/include/mach/hardware.h | 5 +++++ board/xilinx/zynqmp/zynqmp.c | 8 ++++++++ 2 files changed, 13 insertions(+) -- 2.35.1.1320.gc452695387.dirty

2 5

[PATCH v12 0/9] spi-nor: Add parallel and stacked memories support
by Venkatesh Yadav Abbarapu 03 Sep '24

03 Sep '24

This series adds support for Xilinx qspi parallel and stacked memeories. In parallel mode, the current implementation assumes that a maximum of two flashes are connected. The QSPI controller splits the data evenly between both the flashes so, both the flashes that are connected in parallel mode should be identical. During each operation SPI-NOR sets 0th bit for CS0 & 1st bit for CS1 in nor->flags. In stacked mode the current implementation assumes that a maximum of two flashes are connected and both the flashes are of same make but can differ in sizes. So, except the sizes all other flash parameters of both the flashes are identical. Spi-nor will pass on the appropriate flash select flag to low level driver, and it will select pass all the data to that particular flash. Write operation in parallel mode are performed in page size * 2 chunks as each write operation results in writing both the flashes. For doubling the address space each operation is performed at addr/2 flash offset, where addr is the address specified by the user. Similarly for read and erase operations it will read from both flashes, so size and offset are divided by 2 and send to flash. Changes in v2: - Fixed the compilation issues. Changes in v3: - Fixed the CI issues. Changes in v4: - Removed the dio,dummy_bytes variables from zynq_qspi driver. - Fix the compilation issue by including the DM_SPI config. Changes in v5: - Fixed the issue reported by buildman. Changes in v6: - Fixed the issues reported while running the sandbox test cases. Changes in v7: - Fixed the issues reported while running these da850evm_defconfig, imx28_xea_defconfig configs. - Fixed the issue when DM_SPI config is disabled. - Fixed the issue while running the sandbox_noinst_defconfig with spl ./spl/u-boot-spl -d arch/sandbox/dts/test.dtb jedec_spi_nor spi.bin@0: has no valid 'reg' property (-12) jedec_spi_nor spi.bin@1: has no valid 'reg' property (-12) ### ERROR ### Please RESET the board ### Changes in v8: - Fixed the compilation issue with imx28_xea_defconfig. - Fixed the SPL size issue with the axm and taurus defconfigs. - Rebased the patches on top of next branch. Changes in v9: - Updated the commit log why SPL_FIT is being enabled. Changes in v10: - Added the new config SPI_ADVANCE to fix the issue while enabling imx28_xea_defconfig. Changes in v11: - Removed the unused variable, corrected the type of variable and replaced memcpy with memmove. Changes in v12: - Fixed the compilation issue with mx6sabresd defconfig, as the binary size got exceeded. Ashok Reddy Soma (2): mtd: spi-nor: Add parallel memories support for read_sr and read_fsr mtd: spi-nor: Add parallel and stacked memories support in read_bar and write_bar Venkatesh Yadav Abbarapu (7): mtd: spi-nor: Add parallel and stacked memories support spi: spi-uclass: Read chipselect and restrict capabilities spi: zynqmp_gqspi: Add parallel memories support in GQSPI driver spi: zynq_qspi: Add parallel memories support in QSPI driver spi: Add the spi advance options for non SPL config: xea: Enable the SPI_ADVANCE config option config: mx6sabresd: Default don't enable the flash lock configs/imx28_xea_defconfig | 1 + configs/mx6sabresd_defconfig | 1 + drivers/mtd/spi/sandbox.c | 2 +- drivers/mtd/spi/spi-nor-core.c | 400 ++++++++++++++++++++++++++++----- drivers/spi/Kconfig | 8 + drivers/spi/altera_spi.c | 4 +- drivers/spi/atcspi200_spi.c | 2 +- drivers/spi/ath79_spi.c | 2 +- drivers/spi/atmel_spi.c | 6 +- drivers/spi/bcm63xx_hsspi.c | 42 ++-- drivers/spi/bcm63xx_spi.c | 6 +- drivers/spi/bcmbca_hsspi.c | 34 +-- drivers/spi/cf_spi.c | 6 +- drivers/spi/davinci_spi.c | 8 +- drivers/spi/fsl_dspi.c | 18 +- drivers/spi/fsl_espi.c | 4 +- drivers/spi/fsl_qspi.c | 4 +- drivers/spi/gxp_spi.c | 2 +- drivers/spi/mpc8xx_spi.c | 4 +- drivers/spi/mpc8xxx_spi.c | 10 +- drivers/spi/mscc_bb_spi.c | 4 +- drivers/spi/mxc_spi.c | 6 +- drivers/spi/npcm_fiu_spi.c | 14 +- drivers/spi/nxp_fspi.c | 2 +- drivers/spi/octeon_spi.c | 2 +- drivers/spi/omap3_spi.c | 4 +- drivers/spi/pic32_spi.c | 2 +- drivers/spi/rk_spi.c | 4 +- drivers/spi/rockchip_sfc.c | 2 +- drivers/spi/spi-aspeed-smc.c | 28 +-- drivers/spi/spi-mxic.c | 6 +- drivers/spi/spi-qup.c | 4 +- drivers/spi/spi-sifive.c | 6 +- drivers/spi/spi-sn-f-ospi.c | 2 +- drivers/spi/spi-sunxi.c | 6 +- drivers/spi/spi-synquacer.c | 4 +- drivers/spi/spi-uclass.c | 34 ++- drivers/spi/stm32_qspi.c | 2 +- drivers/spi/stm32_spi.c | 4 +- drivers/spi/ti_qspi.c | 14 +- drivers/spi/xilinx_spi.c | 6 +- drivers/spi/zynq_qspi.c | 121 ++++++++-- drivers/spi/zynq_spi.c | 6 +- drivers/spi/zynqmp_gqspi.c | 141 ++++++++++-- include/linux/mtd/spi-nor.h | 12 + include/spi.h | 23 +- lib/acpi/acpi_device.c | 2 +- 47 files changed, 794 insertions(+), 231 deletions(-) -- 2.17.1

2 10

[PATCH 0/3] Add Android 14 bootflow support for AM62X and AM62P board
by Guillaume La Roque 03 Sep '24

03 Sep '24

Ths patchset add support of Android 14 with boot image version 4 for : - AM62X-SK EVM: https://www.ti.com/tool/SK-AM62B - BeaglePlay: https://beagleplay.org/ - AM62PX-SK EVM: https://www.ti.com/tool/SK-AM62P-LP Android Images use to test this series are on the Official TI website: - AM62x/BeaglePlay: https://www.ti.com/tool/PROCESSOR-SDK-AM62X - AM62PX: https://www.ti.com/tool/PROCESSOR-SDK-AM62P Signed-off-by: Guillaume La Roque <glaroque(a)baylibre.com> --- Guillaume La Roque (1): board: ti: am62x_evm: Add android bootflow Mattijs Korpershoek (2): board: beagle: beagleplay: Add android bootflow support board: ti: am62px: Add android bootflow support board/beagle/beagleplay/beagleplay.env | 30 ++++++++++++++++++++++++++++++ board/ti/am62px/am62px.env | 5 +++++ board/ti/am62x/am62x.env | 5 +++++ configs/am62x_a53_android.config | 34 ++++++++++++++++++++++++++++++++++ doc/board/ti/am62x_sk.rst | 14 ++++++++++++++ include/env/ti/android.env | 31 +++++++++++++++++++++++++++++++ 6 files changed, 119 insertions(+) --- base-commit: 57949a99b7bd0aa21abbde1ffa7e50e5d9e10a4e change-id: 20240830-sitaraupstream-5b18f3b9824f Best regards, -- Guillaume La Roque <glaroque(a)baylibre.com>

2 6

usb dwc3 controller configuration discussion
by 1825416995 03 Sep '24

03 Sep '24

hello，uboot official website personnel.  I am writing this email，is want to to ask you a question. I have a little confused in usb dwc3 controller. in detail, when dwc3 controller as the device  peripheral , and in setup transfer: if the data stage have two trb, the first trb type is 'Control-Data', and the other trb type i think is 'Normal'. but in your code, the other trb is also 'Control-Data'. so I think this is a error.(in function "__dwc3_ep0_do_control_data" of file ep0.c ) I don't know if I understand this correct ly. attached is the corresponding code😊

1 0

[ANN] U-Boot v2024.10-rc4 released
by Tom Rini 02 Sep '24

02 Sep '24

Hey all, It's release day and here is -rc4. Things have been and I am optimistic will remain fairly quiet moving forward. In terms of a changelog, git log --merges v2024.10-rc3..v2024.10-rc4 contains what I've pulled but as always, better PR messages and tags will provide better results here. I hope to remain on schedule and that means the rest of the rcs every other Monday, and with final release on Monday, October 7th, 2024. Thanks all! -- Tom

1 0

[PATCH 0/7] Add the USB5744 hub driver as per new DT binding
by Venkatesh Yadav Abbarapu 02 Sep '24

02 Sep '24

Add the usb5744/usb2744 hub driver which does the reset gpio toggling and the i2c initialization sequence. Tested the USB5744/USB2744 usb hub for usb0, usb1 with the DT nodes on KR260 board. Venkatesh Yadav Abbarapu (7): usb: onboard-hub: Add reset-gpio support usb: onboard-hub: Fix the return values of regulator APIs usb: onboard-hub: add support for Microchip USB5744 usb: onboard-hub: Add i2c initialization for usb5744 hub usb: onboard-hub: Bail out if peer hub is already probed configs: zynqmp_kria: Enable the USB onboard hub arm64: zynqmp: Update the usb5744 hub node as per binding arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 48 +++++++ arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 48 +++++++ arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 18 +++ arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 25 +++- common/usb_onboard_hub.c | 176 +++++++++++++++++++++++-- configs/xilinx_zynqmp_kria_defconfig | 1 + 6 files changed, 304 insertions(+), 12 deletions(-) -- 2.17.1

5 15

[PATCH v2] cmd: mmc: Allow using partition name in mmc erase command
by Tomas Paukrt 02 Sep '24

02 Sep '24

The mmc erase command currently requires blk# and cnt parameters which can be obtained using the part start and part size commands if the entire partition needs to be erased. Simplify the use of the mmc erase command by allowing the partition name to be specified directly. --- cmd/mmc.c | 17 +++++++++++++---- doc/usage/cmd/mmc.rst | 6 +++++- 2 files changed, 18 insertions(+), 5 deletions(-) diff --git a/cmd/mmc.c b/cmd/mmc.c index 7244a90..2fc05f9 100644 --- a/cmd/mmc.c +++ b/cmd/mmc.c @@ -472,18 +472,26 @@ static int do_mmc_erase(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { struct mmc *mmc; + struct disk_partition info; u32 blk, cnt, n; - if (argc != 3) + if (argc < 2 || argc > 3) return CMD_RET_USAGE; - blk = hextoul(argv[1], NULL); - cnt = hextoul(argv[2], NULL); - mmc = init_mmc_device(curr_device, false); if (!mmc) return CMD_RET_FAILURE; + if (argc == 3) { + blk = hextoul(argv[1], NULL); + cnt = hextoul(argv[2], NULL); + } else if (part_get_info_by_name(mmc_get_blk_desc(mmc), argv[1], &info) >= 0) { + blk = info.start; + cnt = info.size; + } else { + return CMD_RET_FAILURE; + } + printf("\nMMC erase: dev # %d, block # %d, count %d ... ", curr_device, blk, cnt); @@ -1271,6 +1279,7 @@ U_BOOT_CMD( "mmc swrite addr blk#\n" #endif "mmc erase blk# cnt\n" + "mmc erase partname\n" "mmc rescan [mode]\n" "mmc part - lists available partition on current mmc device\n" "mmc dev [dev] [part] [mode] - show or set current mmc device [partition] and set mode\n" diff --git a/doc/usage/cmd/mmc.rst b/doc/usage/cmd/mmc.rst index 5a64400..55391fd 100644 --- a/doc/usage/cmd/mmc.rst +++ b/doc/usage/cmd/mmc.rst @@ -15,6 +15,7 @@ Synopsis mmc read addr blk# cnt mmc write addr blk# cnt mmc erase blk# cnt + mmc erase partname mmc rescan [mode] mmc part mmc dev [dev] [part] [mode] @@ -44,12 +45,15 @@ The 'mmc write' command writes raw data to MMC device from memory address with b cnt block count -The 'mmc erase' command erases *cnt* blocks on the MMC device starting at block *blk#*. +The 'mmc erase' command erases *cnt* blocks on the MMC device starting at block *blk#* or +the entire partition specified by *partname*. blk# start block offset cnt block count + partname + partition name The 'mmc rescan' command scans the available MMC device. -- 2.7.4

2 2