September 2024 - U-Boot

[PATCH v2 0/2] mtd: spi-nor-ids: Add NO_CHIP_ERASE flag to Infineon 2Gb parts
by tkuw584924＠gmail.com 12 Sep '24

12 Sep '24

From: Takahiro Kuwano <Takahiro.Kuwano(a)infineon.com> S25HS02GT, S25HL02GT, and S28HS02GT are dual-die package parts and do not support chip erase. In v2, split the patch and add fixes tag. Takahiro Kuwano (2): mtd: spi-nor-ids: Add NO_CHIP_ERASE flag to Infineon s25hl02Gt and s25hs02gt mtd: spi-nor-ids: Add NO_CHIP_ERASE flag to Infineon s28hs02gt drivers/mtd/spi/spi-nor-ids.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) -- 2.34.1

1 2

[PATCH RFC/RFT v2 0/4] k3-j784s4-r5-evm: Enable ESMs and related PMIC
by Andrew Halaney 12 Sep '24

12 Sep '24

NOTE: this relies on the linked devicetree changes to land in Linux first and get synced here, otherwise the board will fail to boot! I'm leaving this as a RFC/RFT at this time for that reason until things get merged and synced over (if there's a faster way to get that done please let me know, otherwise I'll be patient. Maybe the cherry-picking described over at https://docs.u-boot.org/en/latest/develop/devicetree/control.html#resyncing… would be appropriate to do *in* this series after that is merged in Linux?). This enables the ESMs and the associated PMIC. Programming these bits is a requirement to make the watchdog actually reset the board. I've tested this series (with the linked change) on the k3-j784s4-evm, but not its sibling the k3-am69-sk. I'd appreciate at a minimum someone to test on that platform to ensure this doesn't break boot. Link: https://lore.kernel.org/lkml/20240911-j784s4-tps6594-bootph-v2-0-a83526264a… Signed-off-by: Andrew Halaney <ahalaney(a)redhat.com> --- Changes in v2: - Loop over ESMs, only configure if prior was successful as without all of them they're not useful (Udit) - Add am69-sk PMIC ESM node (Udit) - Link to v1: https://lore.kernel.org/r/20240906-j784s4-esm-enable-v1-0-b83b17d5a744@redh… --- Andrew Halaney (2): arm: dts: k3-am69-r5-evm: Add the PMIC ESM node configs: j784s4_evm_r5: Enable ESM related configs Keerthy (1): board: ti: j784s4: Initialize the ESM & PMIC ESM Neha Malcom Francis (1): arm: dts: k3-j784s4-r5-evm: Add the PMIC ESM node arch/arm/dts/k3-am69-r5-sk.dts | 7 +++++++ arch/arm/dts/k3-j784s4-r5-evm.dts | 7 +++++++ board/ti/j784s4/evm.c | 24 ++++++++++++++++++++++++ configs/j784s4_evm_r5_defconfig | 7 +++++++ 4 files changed, 45 insertions(+) --- base-commit: 1630ff26cc960439b5949b80cfc604a2c8aa47dd change-id: 20240906-j784s4-esm-enable-4c4f698fe7c4 Best regards, -- Andrew Halaney <ahalaney(a)redhat.com>

2 5

Assistance Required: U-Boot Access Issues on Amlogic A113X SoC
by Mike 12 Sep '24

12 Sep '24

Dear U-Boot Community, I am working on a project involving the Amlogic A113X SoC and have encountered an issue with U-Boot during the boot process over UART. While I am able to connect via UART and observe the boot log, the system does not allow any interaction or command input. It seems that the manufacturer may have restricted this access, potentially violating the GNU GPL license. Here are the details: - *SoC:* Amlogic A113X - *Bootloader:* U-Boot 2015.01 (Jan 13 2023 - 10:30:19) - *Issue:* The device does not respond to input during the boot process over UART (no response to Ctrl+C, Enter, etc.) - *UART Log:* AXG:BL1:d1dbf2:a4926f;FEAT:F0DC31BC:2000;POC:F;EMMC:800;NAND:0;READ:0;0.0;0.0;CHK:0; sdio debug board detected TE: 139689 BL2 Built : 10:38:43, Apr 14 2020. axg gf27ed33 - jenkins@walle02-sh set vcck to 1100 mv set vddee to 950 mv Board ID = 3 CPU clk: 1200MHz DDR low power enabled DDR3 chl: Rank0 16bit @ 912MHz bist_test rank: 0 1c 07 32 26 10 3c 1e 06 36 27 10 3f 00 00 00 00 00 00 00 00 00 00 00 00 772 - PASS Rank0: 256MB(auto)-2T-13 AddrBus test pass! NAND init Load FIP HDR from NAND, src: 0x0000c000, des: 0x01700000, size: 0x00004000, part: 0 Load BL3x from NAND, src: 0x00010000, des: 0x01704000, size: 0x000b7c00, part: 0 NOTICE: BL31: v1.3(release):3edeb02 NOTICE: BL31: Built : 16:43:54, Apr 14 2020 NOTICE: BL31: AXG secure boot! NOTICE: BL31: BL33 decompress pass OPS=0x43 [Image: axg_v1.1.3494-9ec8345 2020-04-17 18:16:39 jenkins@walle02-sh] 25 0c 43 00 c3 ac bf b3 9f 7a e1 5b 3a 07 57 99 bl30:axg ver: 9 mode: 0 bl30:axg thermal0 [0.015883 Inits done] secure task start! high task start! low task start! ERROR: Error initializing runtime service opteed_fast U-Boot 2015.01 (Jan 13 2023 - 10:30:19) DRAM: 256 MiB Relocation Offset is: 0eeb0000 mmu cfg end: 0x20000000 mmu cfg end: 0x20000000 register usb cfg[0][1] = 000000000ff6e198 aml_i2c_init_port init regs for 2 NAND: get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: 98 da 90 15 76 16 NAND device: Manufacturer ID: 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 ) get_sys_clk_rate_mtd() 292, clock setting 200! m3_nand_adjust_timing() sys_clk_rate 200, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =64, bch_bytes =14 ecc mode:6 ecc_page_num=2 eep_need_oobsize=16 plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1 oob avail size 6 Creating 1 MTD partitions on "A revision NAND 2Gib TC58NVG1S3HBAI4 ": 0x000000000000-0x000000200000 : "bootloader" A revision NAND 2Gib TC58NVG1S3HBAI4 initialized ok get_sys_clk_rate_mtd() 292, clock setting 200! bus cycle0: 6,timing: 7 NAND device id: 98 da 90 15 76 16 NAND device: Manufacturer ID: 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 ) get_sys_clk_rate_mtd() 292, clock setting 200! m3_nand_adjust_timing() sys_clk_rate 200, bus_c 6, bus_t 7 oob_fill_cnt =32 oob_size =64, bch_bytes =14 ecc mode:6 ecc_page_num=2 eep_need_oobsize=16 PLANE change! plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1 aml_nand_init :oobmul=1,oobfree.length=8, - oob_size=64 oob avail size 8 nbbt=20 nenv=24 nkey=32 ndtb=40 nddr=44 bbt_start=20 env_start=24 key_start=32 dtb_start=40 ddr_start=44 nbbt: info size=0x800 max_scan_blk=24, start_blk=20 nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1 nbbt free list: blockN=21, ec=-1, dirty_flag=0 blockN=22, ec=-1, dirty_flag=0 blockN=23, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 aml_nand_scan_rsv_info 1137 nbbt valid addr: 280000 aml_nand_bbt_check 1258 bbt is valid, reading. aml_nand_read_rsv_info:446,read nbbt info to 280000 nenv: info size=0x10000 max_scan_blk=32, start_blk=24 nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=5 nenv free list: blockN=25, ec=0, dirty_flag=1 blockN=26, ec=-1, dirty_flag=0 blockN=27, ec=-1, dirty_flag=0 blockN=28, ec=-1, dirty_flag=0 blockN=29, ec=-1, dirty_flag=0 blockN=30, ec=-1, dirty_flag=0 blockN=31, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=32 aml_nand_scan_rsv_info 1137 nenv valid addr: 310000 nkey: info size=0x8000 max_scan_blk=40, start_blk=32 nkey : phy_blk_addr=33, ec=0, phy_page_addr=0, timestamp=2 nkey free list: blockN=32, ec=0, dirty_flag=1 blockN=34, ec=-1, dirty_flag=0 blockN=35, ec=-1, dirty_flag=0 blockN=36, ec=-1, dirty_flag=0 blockN=37, ec=-1, dirty_flag=0 blockN=38, ec=-1, dirty_flag=0 blockN=39, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=16 aml_nand_scan_rsv_info 1137 nkey valid addr: 430000 ndtb: info size=0x20000 max_scan_blk=44, start_blk=40 ndtb : phy_blk_addr=41, ec=0, phy_page_addr=0, timestamp=2 ndtb free list: blockN=40, ec=-1, dirty_flag=0 blockN=42, ec=-1, dirty_flag=0 blockN=43, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=64 aml_nand_scan_rsv_info 1137 ndtb valid addr: 520000 nddr: info size=0x800 max_scan_blk=46, start_blk=44 nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0 nddr free list: blockN=44, ec=-1, dirty_flag=0 blockN=45, ec=-1, dirty_flag=0 aml_nand_scan_rsv_info 1134: page_num=1 nddr valid addr: fffffffffffe0000 aml_nand_rsv_info_check_except_bbt 1228 NO nddr exist tpl: off 8388608, size 8388608 NAND bbt detect factory Bad block at c000000 NAND bbt detect factory Bad block at c020000 Creating 7 MTD partitions on "A revision NAND 2Gib TC58NVG1S3HBAI4 ": 0x000000800000-0x000001000000 : "tpl" 0x000001000000-0x000001200000 : "misc" 0x000001200000-0x000002200000 : "boot_a" 0x000002200000-0x000003200000 : "boot_b" 0x000003200000-0x000007200000 : "system_a" 0x000007200000-0x00000b200000 : "system_b" 0x00000b200000-0x000010000000 : "data" NAND bbt detect factory Bad block at c000000 NAND bbt detect factory Bad block at c020000 A revision NAND 2Gib TC58NVG1S3HBAI4 initialized ok MMC: aml_priv->desc_buf = 0x000000000deae760 aml_priv->desc_buf = 0x000000000deb0aa0 SDIO Port B: 0, SDIO Port C: 1 uboot env amlnf_env_read : #### aml_nand_read_rsv_info:446,read nenv info to 310000 In: serial Out: serial Err: serial aml log : internal sys error! reboot_mode=cold_boot Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 12 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 1 info->slot_info[1].online = 0 info->attemp_times = 12 active slot = 0 cmd: imgread dtb boot_a ${dtb_mem_addr} [imgread]szTimeStamp[2024071615081273] [imgread]MTD pageShift 11, writesz 0x800 aml log : R-2048 check pass! aml log : R2048 check pass! [imgread]Enc dtb sz 0xe000 Amlogic multi-DTB tool Single DTB detected Net: sysnopsys gmac3.7 Phy 0 not found dwmac.ff3f0000amlkey_init() enter! amlnf_key_read: #### amlnf_key_read key data len too much aml_nand_read_rsv_info:446,read nkey info to 430000 [EFUSE_MSG]keynum is 4 MACADDR:*(from chipid) Start read misc partition datas! [burnup]Rd:Up sz 0x440 to align 0x1000 info->attemp_times = 12 info->active_slot = 0 info->slot_info[0].bootable = 1 info->slot_info[0].online = 1 info->slot_info[1].bootable = 1 info->slot_info[1].online = 0 info->attemp_times = 12 active slot = 0 wipe_data=successful wipe_cache=successful Setting bus to 2 i2c_set_bus_num i2c sel 2 bus aml_i2c_init_port init regs for 2 gpio: pin GPIOZ_4 (gpio 18) value is 1 recovery_status= upgrade_step=2 s_version: U-Boot 2015.01 amlkey_init() enter! amlkey_init() 71: already init! [EFUSE_MSG]keynum is 4 [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet InUsbBurn noSof CONFIG_SYSTEM_AS_ROOT: null system_mode: 0 [imgread]szTimeStamp[2024071615081273] [imgread]secureKernelImgSz=0x609800 [burnup]Rd:Up sz 0x509800 to align 0x1000 aml log : R-2048 check pass! aml log : R2048 check pass! aml log : R2048 check pass! aml log : R2048 check pass! avb2: 0 save_power_post ... avb2: 0 ## Booting Android Image at 0x01080000 ... reloc_addr =ded9810 copy done Kernel command line: init=/sbin/init rootfstype=ubifs [store]Is good fdt check header, no need decrypt! load dtb from 0x1000000 ...... Amlogic multi-DTB tool Single DTB detected Uncompressing Kernel Image ... OK kernel loaded at 0x01080000, end = 0x01a5b200 Loading Ramdisk to 0dcf0000, end 0de9d800 ... OK Loading Device Tree to 000000000dce0000, end 000000000dceffe6 ... OK fdt_fixup_memory_banks, reg:0000000000000000 Starting kernel ... uboot time: 2751820 us I understand that U-Boot has been modified by the manufacturer, which complicates the situation. I am seeking advice on the following: - Are there any known methods or workarounds to regain control over the U-Boot environment in such scenarios? - Are there any specific forums or community resources where I might find additional help or similar cases? Any guidance or suggestions would be greatly appreciated. Thank you in advance for your assistance! Best regards, Mike

3 2

[RESEND PATCH v2 0/6] mtd: Make sure UBIFS does not do multi-pass page programming on flashes that don't support it
by tkuw584924＠gmail.com 12 Sep '24

12 Sep '24

From: Takahiro Kuwano <Takahiro.Kuwano(a)infineon.com> Resent after modifying commit message in #5 (mention Linux commit first) and collecting A-b tags. This series is equivalent to the one for Linux MTD submitted by Pratyush Yadav. https://patchwork.ozlabs.org/project/linux-mtd/list/?series=217759&state=* Changes in v2: - Fix an issue in setting macronix_octal_fixups - Rework fixup hooks Takahiro Kuwano (6): mtd: ubi: Do not zero out EC and VID on ECC-ed NOR flashes mtd: spi-nor: Allow flashes to specify MTD writesize mtd: spi-nor: Check nor->info before setting macronix_octal_fixups mtd: spi-nor: Replace default_init() hook with late_init() mtd: spi-nor: Call spi_nor_post_sfdp_fixups() only after spi_nor_parse_sfdp() mtd: spi-nor: Set ECC unit size to MTD writesize in Infineon SEMPER flashes drivers/mtd/spi/spi-nor-core.c | 88 +++++++++++++++++++++------------- drivers/mtd/ubi/build.c | 4 +- drivers/mtd/ubi/io.c | 9 +++- include/linux/mtd/spi-nor.h | 1 + 4 files changed, 65 insertions(+), 37 deletions(-) -- 2.34.1

1 6

[RESEND PATCH v2 0/3] mtd: spi-nor: Add support for S25FS-S family
by tkuw584924＠gmail.com 12 Sep '24

12 Sep '24

From: Takahiro Kuwano <Takahiro.Kuwano(a)infineon.com> Reset after rebasing and collecting R-b tags. The S25FS064S, S25FS128S, and S25FS256S are the same family of SPI NOR Flash devices with S25FS512S. Datasheets: https://www.infineon.com/dgdl/Infineon-S25FS064S_64_Mb_8_MB_FS-S_Flash_SPI_… https://www.infineon.com/dgdl/Infineon-S25FS128S_S25FS256S_1.8_V_Serial_Per… Takahiro Kuwano (3): mtd: spi-nore-core: Fix 4KB erase opcode for s25fs-s mtd: spi-nor-id: Use INFO6 macro for S25FL-S mtd: spi-nor-id: Add S25FS064S, S25FS128S, S25FS256S IDs drivers/mtd/spi/spi-nor-core.c | 28 +++++++++++++++++++++------- drivers/mtd/spi/spi-nor-ids.c | 7 +++++-- 2 files changed, 26 insertions(+), 9 deletions(-) -- 2.34.1

1 3

DE1-SOC LKM MAKEFILE ON U-Boot SPL 2013.01.01
by aied bebar 12 Sep '24

12 Sep '24

HII , I AM USING A DE1-SOC BOARD THAT IS BASED ON U-Boot SPL 2013.01.01 THE BOARD IS :Altera SOCFPGA Cyclone V Board i downloaded the console version of linux os from terasic and its working fine on the board I am trying to load a simple lkm that prints "hello world" on the kernel , and in the makefile we need to specify the source directory location. I tried all the options and examples of makefiles that I could lay my hands on , and nothing seems to work . in some cases it worked but when i try to load the module on the board using insmod command i get "invalid file format " i tried to get some help in roketboard forum and in intel community forums without any success , so i thought maybe i can get help from you cause from what i understand the console ver is based on U-Boot SPL 2013.01.01 i need to know the path where are the source files located in U-Boot SPL 2013.01.01 and if you have a make file that is tested on the de1-soc maybe for compiling linux kernel modules (device drivers) i be glad for any help ,thanks in advance

2 1

U-Boot SPL crashes after stack setup
by Osman 12 Sep '24

12 Sep '24

Hello, I am having a crash with u-boot-spl simulated in spike, to be more spesific the problem occurs after this line located in start.S: mv sp, t0 and spike prints this: dmi_read(0x05 (data[1]) -> -1 because abstractcs.busy==true dmi_read(0x04 (data[0]) -> -1 because abstractcs.busy==true My first thought was that the memory was unaccesible but that isn't the case because i can see the contents of the memory through GDB (i will also attach memory.png that shows the address at the sp pointer) and i provided the memory for spl in spike like so: ./spike -H --rbb-port=9824 -m0x80000000:0x20000000,0x90000000:0x100000,0x00000000:0x20000,0x70000000:0x10000 $SPL_PATH My second thought was that maybe somehow the size wasn't enough and the sp just overlaps with some region but i checked the readelf (i will attach it as readelf_output.txt) but nothing seemed unusual. I am not really experienced in this topic so i would really appreciate it if someone can guide me on the right direction. You can see the config files attached to end of this e-mail. Regards

2 1

fit signing without access to private key
by Mikael Pahmp 12 Sep '24

12 Sep '24

Hi. We want to sign fitImages but our company policies does not allow access to the private signing key from our build machines. Is there a way using e.g. mkimage to 1. Generate the hash of a fitImage configuration section? We will then request a signature for the hash from our enterprise PKI. 2. Incorporate the signature in the fitImage? BR / Mikael

2 1

[PATCH 00/17] Implement ACPI on aarch64
by Patrick Rudolph 12 Sep '24

12 Sep '24

Based on the existing work done by Simon Glass this series adds support for booting aarch64 devices using ACPI only. As target the Raspberry Pi4 was used, which is broadly available and allows easy testing of the proposed solution. The series is split into ACPI cleanups and code movements, adding Arm specific ACPI tables and finally SoC and mainboard related changes to boot a Linux on the RPi4. Currently only the mandatory ACPI tables are supported, allowing to boot into Linux without errors. The changes were tested on real hardware as well on QEMU v9.0: qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \ -smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \ -dtb bcm2711-rpi-4-b.dtb -nographic Please note that the current implementation still requires a DTB to be provided to U-Boot and that the DTB is used within U-Boot to load drivers, to disable/enable certain hardware blocks in ACPI. The DTB is not passed to the OS when using the bootefi cmd. Tested against FWTS V24.03.00. Known issues: - The QEMU support is currently limited as it doesn't emulate PCI, USB or ethernet devices! - The SMP bringup doesn't work on real hardware, but works in QEMU. - PCI isn't working on real hardware since the pcie_brcmstb Linux kernel module doesn't support ACPI yet. Maximilian Brune (3): acpi: x86: Move SPCR and DBG2 into common code acpi: x86: Write FADT in common code serial: serial_pl01x: Implement .getinfo() for PL01 Patrick Rudolph (12): acpi: x86: Move MADT to common code acpi: Fix typo acpi: Add define for GTDT arm: acpi: Add generic ACPI methods acpi: acpi_table: Bump revisions acpi: Add ACPITAB for PPTT and GTDT arm: mach-bcm283x: Map the ARM local MMIO as well arm: bcm283x: Write ACPI tables arm: cpu: Add ACPI parking protocol support arm: mach-bcm283x: Add ARMV8_MULTIENTRY support arm: mach-bcm283x: Enable ARMV8_MULTIENTRY configs: Add RPI4 ACPI defconfig Simon Glass (2): arm: mach-bcm283x: Bring in some header files from tianocore board: raspberrypi: Add ASL files from tianocore arch/arm/cpu/armv8/Makefile | 1 + arch/arm/cpu/armv8/parking_protocol_v8.S | 102 +++++ arch/arm/cpu/armv8/start.S | 4 + arch/arm/include/asm/acpi_table.h | 70 ++++ arch/arm/lib/Makefile | 1 + arch/arm/lib/acpi_table.c | 131 ++++++ arch/arm/mach-bcm283x/Kconfig | 4 + arch/arm/mach-bcm283x/Makefile | 4 + arch/arm/mach-bcm283x/bcm2711_acpi.c | 172 ++++++++ .../mach-bcm283x/include/mach/acpi/bcm2711.h | 152 +++++++ .../mach-bcm283x/include/mach/acpi/bcm2836.h | 127 ++++++ .../include/mach/acpi/bcm2836_gpio.h | 19 + .../include/mach/acpi/bcm2836_gpu.h | 47 +++ .../include/mach/acpi/bcm2836_pwm.h | 33 ++ .../include/mach/acpi/bcm2836_sdhost.h | 18 + .../include/mach/acpi/bcm2836_sdio.h | 21 + arch/arm/mach-bcm283x/init.c | 79 +++- arch/sandbox/lib/Makefile | 9 +- arch/sandbox/lib/acpi_table.c | 7 + arch/x86/cpu/apollolake/acpi.c | 20 +- arch/x86/cpu/baytrail/acpi.c | 17 +- arch/x86/cpu/intel_common/acpi.c | 20 +- arch/x86/cpu/quark/acpi.c | 19 +- arch/x86/cpu/tangier/acpi.c | 31 +- arch/x86/include/asm/acpi_table.h | 26 +- arch/x86/lib/acpi_table.c | 243 +----------- board/raspberrypi/rpi/.gitignore | 3 + board/raspberrypi/rpi/Makefile | 2 + board/raspberrypi/rpi/acpitables.h | 91 +++++ board/raspberrypi/rpi/dsdt.asl | 290 ++++++++++++++ board/raspberrypi/rpi/emmc.asl | 136 +++++++ board/raspberrypi/rpi/gpudevs.asl | 372 ++++++++++++++++++ board/raspberrypi/rpi/pci.asl | 177 +++++++++ board/raspberrypi/rpi/pep.asl | 90 +++++ board/raspberrypi/rpi/rhpx.asl | 195 +++++++++ board/raspberrypi/rpi/rpi.c | 182 +++++++++ board/raspberrypi/rpi/sdhc.asl | 111 ++++++ board/raspberrypi/rpi/uart.asl | 208 ++++++++++ boot/bootflow.c | 8 +- configs/rpi_4_acpi_defconfig | 79 ++++ drivers/pci/pcie_brcmstb.c | 101 +---- drivers/serial/serial_pl01x.c | 24 ++ include/acpi/acpi_table.h | 107 +++-- include/serial.h | 1 + lib/Kconfig | 15 + lib/acpi/acpi_table.c | 317 ++++++++++++++- 46 files changed, 3414 insertions(+), 472 deletions(-) create mode 100644 arch/arm/cpu/armv8/parking_protocol_v8.S create mode 100644 arch/arm/lib/acpi_table.c create mode 100644 arch/arm/mach-bcm283x/bcm2711_acpi.c create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2711.h create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836.h create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpio.h create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpu.h create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_pwm.h create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdhost.h create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdio.h create mode 100644 arch/sandbox/lib/acpi_table.c create mode 100644 board/raspberrypi/rpi/.gitignore create mode 100644 board/raspberrypi/rpi/acpitables.h create mode 100644 board/raspberrypi/rpi/dsdt.asl create mode 100644 board/raspberrypi/rpi/emmc.asl create mode 100644 board/raspberrypi/rpi/gpudevs.asl create mode 100644 board/raspberrypi/rpi/pci.asl create mode 100644 board/raspberrypi/rpi/pep.asl create mode 100644 board/raspberrypi/rpi/rhpx.asl create mode 100644 board/raspberrypi/rpi/sdhc.asl create mode 100644 board/raspberrypi/rpi/uart.asl create mode 100644 configs/rpi_4_acpi_defconfig -- 2.45.2

4 42

[PATCH v3 00/16] Miscellaneous fixes
by Jerome Forissier 12 Sep '24

12 Sep '24

Miscellaneous fixes made when developing the lwIP series [1]. They are posted separately since they make sense on their own. Subsequent versions of the lwIP series will contain a squashed version of this one. [1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&arc… Changes in v3: - Apply R-b tags from Peter R. - Rework "buildman/toolchain.py: set CROSS_COMPILE only if self.cross is set". Subject changed to "buildman/toolchain.py: do not set CROSS_COMPILE for sandbox", GetEnvArgs function fixed as well, and test cases added. (Simon G.) Changes in v2: - Rebased onto master - "flash: prefix error codes with FL_" Update drivers/mtd/altera_qspi.c too. This was mentioned by Simon G. in my lwIP v9 thread [1]. Tom R./Ilias A./Peter R.: I kept your R-b tags, please shout if it's not OK. - "net: fm: call dtsec_init_phy() only when it is defined" Address Simon G.'s comments: update condition (parentheses, CONFIG_BITBANGMII, if instead of #if). Peter R: I dropped your R-b since the code changed significantly. - New patches: "common: update: UPDATE_COMMON implies CMD_TFTPBOOT" "cmd: pxe: CMD_PXE implies CMD_TFTPBOOT" "buildman/toolchain.py: set CROSS_COMPILE only if self.cross is set" [1] https://lists.denx.de/pipermail/u-boot/2024-August/563497.html Jerome Forissier (16): Makefile: detect HOST_ARCH properly when CROSS_COMPILE is multi-word buildman/toolchain.py: do not set CROSS_COMPILE for sandbox flash: prefix error codes with FL_ at91: rename mem_init() to at91_mem_init() arm: omap2: add missing #include <netdev.h> net: fm: call dtsec_init_phy() only when it is defined net: wget: removed unused function wget_success() net: phy: ncsi: depend on NET net: ftgmac100: depend on NET net: wget: allow EFI boot net: fec_mxc_init(): do not ignore return status of fec_open() test/py: net_boot: fix comment test/py: test_efi_loader: add missing dependency on cmd_tftpboot test/py: test_efi_loader: add HTTP (wget) test for the EFI loader common: update: UPDATE_COMMON implies CMD_TFTPBOOT cmd: pxe: CMD_PXE implies CMD_TFTPBOOT Makefile | 2 +- arch/arm/mach-at91/include/mach/at91_common.h | 2 +- arch/arm/mach-at91/spl_at91.c | 2 +- arch/arm/mach-at91/spl_atmel.c | 2 +- arch/arm/mach-omap2/omap3/emac.c | 1 + .../atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +- board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +- .../atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 2 +- .../sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 2 +- board/atmel/sama5d2_icp/sama5d2_icp.c | 2 +- .../atmel/sama5d2_xplained/sama5d2_xplained.c | 2 +- .../atmel/sama5d3_xplained/sama5d3_xplained.c | 2 +- board/atmel/sama5d3xek/sama5d3xek.c | 2 +- .../atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +- board/atmel/sama5d4ek/sama5d4ek.c | 2 +- board/cobra5272/flash.c | 26 ++++---- .../conclusive/kstr-sama5d27/kstr-sama5d27.c | 2 +- board/freescale/m5253demo/flash.c | 6 +- board/gardena/smart-gateway-at91sam/spl.c | 2 +- board/siemens/corvus/board.c | 2 +- board/siemens/smartweb/smartweb.c | 2 +- board/siemens/taurus/taurus.c | 2 +- cmd/Kconfig | 1 + common/Kconfig | 1 + common/flash.c | 44 ++++++------- drivers/mtd/altera_qspi.c | 4 +- drivers/mtd/cfi_flash.c | 36 +++++------ drivers/net/Kconfig | 1 + drivers/net/fec_mxc.c | 3 +- drivers/net/fm/eth.c | 10 ++- drivers/net/phy/Kconfig | 1 + include/flash.h | 20 +++--- net/wget.c | 11 ++-- test/py/tests/test_efi_loader.py | 62 ++++++++++++++----- test/py/tests/test_net_boot.py | 2 +- tools/buildman/test.py | 46 ++++++++++++++ tools/buildman/toolchain.py | 6 +- 38 files changed, 203 insertions(+), 118 deletions(-) -- 2.40.1

2 22