June 2024 - U-Boot

[PATCH] Fix Kconfig coding style from spaces to tab
by Anand Moon 06 Jul '24

06 Jul '24

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Anand Moon <linux.amoon(a)gmail.com> --- boot/Kconfig | 8 ++++---- cmd/Kconfig | 20 ++++++++++---------- disk/Kconfig | 2 +- lib/Kconfig | 2 +- net/Kconfig | 4 ++-- 5 files changed, 18 insertions(+), 18 deletions(-) diff --git a/boot/Kconfig b/boot/Kconfig index 6f3096c15a..12148ac3f2 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -150,10 +150,10 @@ config FIT_IMAGE_POST_PROCESS processed before being added to the FIT image). config FIT_PRINT - bool "Support FIT printing" - default y - help - Support printing the content of the fitImage in a verbose manner. + bool "Support FIT printing" + default y + help + Support printing the content of the fitImage in a verbose manner. config SPL_FIT bool "Support Flattened Image Tree within SPL" diff --git a/cmd/Kconfig b/cmd/Kconfig index b026439c77..011f4ad429 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -271,7 +271,7 @@ config CMD_BOOTM_PRE_LOAD depends on CMD_BOOTM depends on IMAGE_PRE_LOAD help - Enable support of stage pre-load for the bootm command. + Enable support of stage pre-load for the bootm command. This stage allow to check or modify the image provided to the bootm command. @@ -897,9 +897,9 @@ config CMD_MX_CYCLIC bool "Enable cyclic md/mw commands" depends on CMD_MEMORY help - Add the "mdc" and "mwc" memory commands. These are cyclic - "md/mw" commands. - Examples: + Add the "mdc" and "mwc" memory commands. These are cyclic + "md/mw" commands. + Examples: => mdc.b 10 4 500 This command will print 4 bytes (10,11,12,13) each 500 ms. @@ -2150,12 +2150,12 @@ config CMD_BLKMAP Example use-cases: - Treat a region of RAM as a block device, i.e. a RAM disk. This let's - you extract files from filesystem images stored in RAM (perhaps as a - result of a TFTP transfer). + you extract files from filesystem images stored in RAM (perhaps as a + result of a TFTP transfer). - Create a virtual partition on an existing device. This let's you - access filesystems that aren't stored at an exact partition - boundary. A common example is a filesystem image embedded in an FIT - image. + access filesystems that aren't stored at an exact partition + boundary. A common example is a filesystem image embedded in an FIT + image. config CMD_BUTTON bool "button" @@ -2934,7 +2934,7 @@ config CMD_UBI_RENAME bool "Enable rename" depends on CMD_UBI help - Enable a "ubi" command to rename ubi volume: + Enable a "ubi" command to rename ubi volume: ubi rename <oldname> <newname> config CMD_UBIFS diff --git a/disk/Kconfig b/disk/Kconfig index 8549695807..ffa835eb35 100644 --- a/disk/Kconfig +++ b/disk/Kconfig @@ -116,7 +116,7 @@ config EFI_PARTITION_ENTRIES_NUMBERS number. config EFI_PARTITION_ENTRIES_OFF - int "Offset (in bytes) of the EFI partition entries" + int "Offset (in bytes) of the EFI partition entries" depends on EFI_PARTITION default 0 help diff --git a/lib/Kconfig b/lib/Kconfig index 189e6eb31a..b8e4f516f9 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -1143,7 +1143,7 @@ config PHANDLE_CHECK_SEQ bool "Enable phandle check while getting sequence number" help When there are multiple device tree nodes with same name, - enable this config option to distinguish them using + enable this config option to distinguish them using phandles in fdtdec_get_alias_seq() function. endmenu diff --git a/net/Kconfig b/net/Kconfig index 5dff633629..7cb80b880a 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -42,8 +42,8 @@ config BOOTP_SEND_HOSTNAME DNS server. To do this, they need the hostname of the DHCP requester. If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content - of the "hostname" environment variable is passed as - option 12 to the DHCP server. + of the "hostname" environment variable is passed as + option 12 to the DHCP server. config NET_RANDOM_ETHADDR bool "Random ethaddr if unset" -- 2.44.0

2 1

[PATCH] configs: Remove duplicate newlines
by Marek Vasut 06 Jul '24

06 Jul '24

Drop all duplicate newlines from config headers. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Cc: Francesco Dolcini <francesco.dolcini(a)toradex.com> Cc: Sean Anderson <seanga2(a)gmail.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Tom Rini <trini(a)konsulko.com> Cc: u-boot(a)lists.denx.de --- include/configs/M5208EVBE.h | 1 - include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 1 - include/configs/M5253DEMO.h | 2 -- include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 1 - include/configs/M5282EVB.h | 1 - include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/P2041RDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/arbel.h | 1 - include/configs/aristainetos2.h | 1 - include/configs/astro_mcf5373l.h | 1 - include/configs/cobra5272.h | 1 - include/configs/display5.h | 1 - include/configs/ds414.h | 1 - include/configs/eb_cpu5282.h | 1 - include/configs/ethernut5.h | 1 - include/configs/ge_bx50v3.h | 1 - include/configs/imx6_logic.h | 1 - include/configs/imx7-cm.h | 1 - include/configs/imx8mm-cl-iot-gate.h | 1 - include/configs/imx8mm_evk.h | 1 - include/configs/imx8mn_evk.h | 1 - include/configs/imx8mp_evk.h | 1 - include/configs/imx8mp_rsb3720.h | 1 - include/configs/imx8mq_cm.h | 1 - include/configs/imx8mq_evk.h | 1 - include/configs/imx8mq_phanbell.h | 1 - include/configs/imx8mq_reform2.h | 1 - include/configs/imx8ulp_evk.h | 2 -- include/configs/j721e_evm.h | 1 - include/configs/kontron_pitx_imx8m.h | 2 -- include/configs/ls1012aqds.h | 1 - include/configs/ls1043a_common.h | 1 - include/configs/ls1088a_common.h | 3 --- include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h | 1 - include/configs/lx2160a_common.h | 1 - include/configs/meson64.h | 1 - include/configs/mt8183.h | 1 - include/configs/mt8516.h | 1 - include/configs/mx53cx9020.h | 1 - include/configs/mx6ullevk.h | 1 - include/configs/mx7ulp_evk.h | 1 - include/configs/phycore_imx8mm.h | 1 - include/configs/phycore_imx8mp.h | 1 - include/configs/pico-imx6ul.h | 1 - include/configs/pico-imx8mq.h | 1 - include/configs/sei510.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/socrates.h | 1 - include/configs/stm32mp15_dh_dhsom.h | 1 - include/configs/stmark2.h | 1 - include/configs/ten64.h | 1 - include/configs/topic_miami.h | 1 - include/configs/warp7.h | 1 - include/configs/x86-common.h | 1 - include/configs/xtfpga.h | 1 - include/configs/zynq-common.h | 1 - 63 files changed, 68 deletions(-) diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index d4c1e066884..a4fda551f1f 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -111,5 +111,4 @@ #define CFG_SYS_CS0_MASK 0x007F0001 #define CFG_SYS_CS0_CTRL 0x00001FA0 - #endif /* _M5208EVBE_H */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index e5428183400..8939c8e7ab9 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -130,5 +130,4 @@ # define CFG_SYS_CS0_CTRL 0x00001D80 #endif - #endif /* _M5329EVB_H */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 2f4743ce50c..4fd539c0174 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -120,5 +120,4 @@ #define CFG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ #define CFG_SYS_GPIO1_LED 0x00400000 /* user led */ - #endif /* M5249 */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 0ff0bfce90b..75c70be7ac4 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -10,7 +10,6 @@ #define CFG_SYS_UART_PORT (0) - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ @@ -132,5 +131,4 @@ #define CFG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ #define CFG_SYS_GPIO1_LED 0x00400000 /* user led */ - #endif /* _M5253DEMO_H */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 98a17181a41..0d332cba61c 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -107,5 +107,4 @@ #define CFG_SYS_PBDAT 0x0000 #define CFG_SYS_PDCNT 0x00000000 - #endif /* _M5272C3_H */ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 77ddf717643..607c5dee2fb 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -116,5 +116,4 @@ #define CFG_SYS_CS1_CTRL 0x00001900 #define CFG_SYS_CS1_MASK 0x00070001 - #endif /* _M5275EVB_H */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index e289a23b800..31699a40b6f 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -127,5 +127,4 @@ #define CFG_SYS_DDRUA 0x05 #define CFG_SYS_PJPAR 0xFF - #endif /* _CONFIG_M5282EVB_H */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index dcc5701ee0b..6359915e09a 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -132,5 +132,4 @@ #define CFG_SYS_CS1_MASK 0x00070001 #define CFG_SYS_CS1_CTRL 0x00001FA0 - #endif /* _M53017EVB_H */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index dd5d4c98023..456135bdc64 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -138,5 +138,4 @@ #define CFG_SYS_CS2_CTRL 0x00001f60 #endif - #endif /* _M5329EVB_H */ diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 4bb99487509..4e8dcb5ef7f 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -136,5 +136,4 @@ #define CFG_SYS_CS2_MASK (16 << 20) #define CFG_SYS_CS2_CTRL 0x00001f60 - #endif /* _M5373EVB_H */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 3967cc28363..a5176d176dc 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -132,7 +132,6 @@ */ #define CFG_SYS_NAND_BASE 0xE0600000 - /* Vitesse 7385 */ #define CFG_SYS_VSC7385_BASE 0xF0000000 diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 28f53ae78a1..7cf6514f148 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -160,7 +160,6 @@ /* I2C */ - /* * RapidIO */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 78e136224ec..c95325e162d 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -355,7 +355,6 @@ #define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR #endif - #define __USB_PHY_TYPE utmi /* diff --git a/include/configs/arbel.h b/include/configs/arbel.h index d8ccc459682..61f6a5e2438 100644 --- a/include/configs/arbel.h +++ b/include/configs/arbel.h @@ -15,7 +15,6 @@ #define CFG_SYS_BAUDRATE_TABLE \ { 9600, 14400, 19200, 38400, 57600, 115200, 230400, 380400, 460800, 921600 } - /* Default environemnt variables */ #define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80400000\0" \ "stdin=serial\0" \ diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 286435d6f84..9d4a4bbdf43 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -22,7 +22,6 @@ #include "mx6_common.h" - /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index f3bfefa835e..65224324fbc 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -184,5 +184,4 @@ #define CFG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ CF_CACR_DCM_P) - #endif /* _CONFIG_ASTRO_MCF5373L_H */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 556705fb09f..cd50ffe98d0 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -184,5 +184,4 @@ configuration */ #define CFG_SYS_PBDAT 0x0000 /* PortB value reg. */ #define CFG_SYS_PDCNT 0x00000000 /* PortD control reg. */ - #endif /* _CONFIG_COBRA5272_H */ diff --git a/include/configs/display5.h b/include/configs/display5.h index 3b96fff7d6f..2005a256d6e 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -119,7 +119,6 @@ "run tftp_mmc_rootfs;" \ "run tftp_mmc_rootfs_bkp;" \ - #define TFTP_UPDATE_RECOVERY_SWU_KERNEL \ "tftp_sf_fitImg_SWU=" \ "if tftp ${loadaddr} ${kernel_file}; then " \ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index f1921dac5e7..6fbcec0898a 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -53,7 +53,6 @@ "tftpboot ${loadaddr} u-boot-with-spl.kwb; " \ "sf update ${loadaddr} 0x0 0xd0000\0" - /* increase autoneg timeout, my NIC sucks */ #endif /* _CONFIG_SYNOLOGY_DS414_H */ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index e2c9d9c43ce..26e4ade34ee 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -138,6 +138,5 @@ #define CFG_SYS_DDRUA 0x05 #define CFG_SYS_PJPAR 0xFF - #endif /* _CONFIG_M5282EVB_H */ /*---------------------------------------------------------------------*/ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 182369def91..807c6963192 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -32,7 +32,6 @@ /* 512kB on-chip NOR flash */ # define CFG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */ - /* bootstrap + u-boot + env + linux in dataflash on CS0 */ /* NAND flash */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 32960fb9325..07b36706e56 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -88,7 +88,6 @@ "run doboot; " \ "run failbootcmd\0" \ - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 85c054451f3..66004a6eb2a 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -17,7 +17,6 @@ #define CFG_SYS_FSL_ESDHC_ADDR 0 #define CFG_SYS_FSL_USDHC_NUM 2 - /* Ethernet Configs */ #define CFG_FEC_MXC_PHYADDR 0 diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index 106fbdb9053..131f18290b9 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -77,7 +77,6 @@ #define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define CFG_SYS_FSL_USDHC_NUM 2 - /* USB Configs */ #define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 0c547027ba6..6442e3d570f 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -126,7 +126,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index d5642b96495..9dd63fc1196 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -56,7 +56,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x200000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index b759b834b80..ca02e26c26e 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -48,7 +48,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x200000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 71452aa2833..741ee39db1a 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -43,7 +43,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - /* Totally 6GB DDR */ #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index 10a166d781e..b82e35f4963 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -126,7 +126,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - /* Totally 6GB or 4G DDR */ #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 7cf482d6de1..2bbd6b1680f 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -48,7 +48,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1 GB DDR */ diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index d2e1649400a..9eefc31dc6f 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -53,7 +53,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */ diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index b66fc18fa5e..cd73a72d2b7 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -86,7 +86,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ diff --git a/include/configs/imx8mq_reform2.h b/include/configs/imx8mq_reform2.h index 3148e8622e1..7fa441a8a83 100644 --- a/include/configs/imx8mq_reform2.h +++ b/include/configs/imx8mq_reform2.h @@ -54,7 +54,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x100000000 /* 4 GiB DDR */ diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 750aef1b597..aa9da19a11f 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -14,7 +14,6 @@ #ifdef CONFIG_SPL_BUILD #define CFG_MALLOC_F_ADDR 0x22040000 - #endif /* ENET Config */ @@ -51,7 +50,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x80000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index c26438c8684..d6853cd339f 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -25,5 +25,4 @@ /* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> - #endif /* __CONFIG_J721E_EVM_H */ diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 101c59141f7..3dda7b66806 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -18,7 +18,6 @@ #define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ - #define CFG_POWER_PFUZE100_I2C_ADDR 0x08 #endif @@ -56,7 +55,6 @@ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV - #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 35e8ff05798..3c4f8b75b18 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -48,7 +48,6 @@ */ #define CFG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ - /* Voltage monitor on channel 2*/ #define I2C_VOL_MONITOR_ADDR 0x40 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index ac2319c1b42..e500a7d80ff 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -159,7 +159,6 @@ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$board\0" - #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 720a95d2f53..34085eeecc7 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -42,7 +42,6 @@ /* I2C */ - /* Serial Port */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2) @@ -84,11 +83,9 @@ unsigned long long get_qixis_addr(void); #define QIXIS_BASE_PHYS 0x20000000 #define QIXIS_BASE_PHYS_EARLY 0xC000000 - #define CFG_SYS_NAND_BASE 0x530000000ULL #define CFG_SYS_NAND_BASE_PHYS 0x30000000 - /* MC firmware */ /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ #define CFG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 084ee064ae6..36e8422c34d 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -16,7 +16,6 @@ #define SPD_EEPROM_ADDRESS 0x51 - /* * IFC Definitions */ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index a1749149e50..8be5febe57b 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -17,7 +17,6 @@ #define SPD_EEPROM_ADDRESS 0x51 - #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CFG_SYS_NOR0_CSPR_EXT (0x0) #define CFG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 6f46ca78d4d..4c1b4bf2b2c 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -37,7 +37,6 @@ * will be udpated later when get_bus_freq(0) is available. */ - /* Serial Port */ #define CFG_PL011_CLOCK (get_bus_freq(0) / 4) #define CFG_SYS_SERIAL0 0x21c0000 diff --git a/include/configs/meson64.h b/include/configs/meson64.h index 65fa5f3d6dd..ccb8ea2e716 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -144,5 +144,4 @@ BOOTENV #endif - #endif /* __MESON64_CONFIG_H */ diff --git a/include/configs/mt8183.h b/include/configs/mt8183.h index 1f973829bba..7c31e219afd 100644 --- a/include/configs/mt8183.h +++ b/include/configs/mt8183.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> - #define CFG_SYS_NS16550_COM1 0x11005200 #define CFG_SYS_NS16550_CLK 26000000 diff --git a/include/configs/mt8516.h b/include/configs/mt8516.h index 73776e3705b..27c3718352d 100644 --- a/include/configs/mt8516.h +++ b/include/configs/mt8516.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> - #define CFG_SYS_NS16550_COM1 0x11005000 #define CFG_SYS_NS16550_CLK 26000000 diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index e995776d30d..dccfdc3a15d 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -21,7 +21,6 @@ /* bootz: zImage/initrd.img support */ - /* USB Configs */ #define CFG_MXC_USB_PORT 1 #define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index 2c3cd32cefa..910140ab4b7 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -7,7 +7,6 @@ #ifndef __MX6ULLEVK_CONFIG_H #define __MX6ULLEVK_CONFIG_H - #include <asm/arch/imx-regs.h> #include <linux/sizes.h> #include <linux/stringify.h> diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 5f4cd930623..d1c1202d061 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> - /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index ce6dc87c69c..dd7cfdba52d 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -63,7 +63,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE SZ_512K - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 299fabc6a99..47c56b50b16 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -18,7 +18,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE SZ_512K - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 4caa8233758..8a22f0134b3 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -7,7 +7,6 @@ #ifndef __PICO_IMX6UL_CONFIG_H #define __PICO_IMX6UL_CONFIG_H - #include <asm/arch/imx-regs.h> #include <linux/sizes.h> #include "mx6_common.h" diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index be31f8a23ca..422b89a3dd3 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -65,7 +65,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0x40000000 #define CFG_SYS_INIT_RAM_SIZE 0x80000 - #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2 GiB DDR */ diff --git a/include/configs/sei510.h b/include/configs/sei510.h index ea91a061577..0f8070b8d31 100644 --- a/include/configs/sei510.h +++ b/include/configs/sei510.h @@ -25,7 +25,6 @@ "name=userdata,size=4820M,uuid=${uuid_gpt_userdata};" \ "name=rootfs,size=-,uuid=" ROOT_UUID - #include <configs/meson64_android.h> #endif /* __CONFIG_H */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 6b1d5caafb1..74b7fe85800 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -40,7 +40,6 @@ #define CFG_SYS_NS16550_COM1 0x44e09000 #define CFG_SYS_NS16550_COM4 0x481a6000 - /* I2C Configuration */ /* Defines for SPL */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 64cc17ca7ca..006d649f6ed 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -48,7 +48,6 @@ /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x50 /* CTLR 0 DIMM 0 */ - /* Hardcoded values, to use instead of SPD */ #define CFG_SYS_DDR_CS0_BNDS 0x0000000f #define CFG_SYS_DDR_CS0_CONFIG 0x80010102 diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index c1fca8359d2..6fe6e7b9b8c 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -53,7 +53,6 @@ "update_sf=run dh_update_sd_to_sf\0" \ "usb_pgood_delay=1000\0" - #include <configs/stm32mp15_common.h> #endif diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index af5da096b7d..c8a39e191a2 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -95,7 +95,6 @@ #define CACR_STATUS (CFG_SYS_INIT_RAM_ADDR + \ CFG_SYS_INIT_RAM_SIZE - 12) - #define CFG_SYS_I2C_0 #endif /* __STMARK2_CONFIG_H */ diff --git a/include/configs/ten64.h b/include/configs/ten64.h index d2bef9b6e52..d5bb2e96c51 100644 --- a/include/configs/ten64.h +++ b/include/configs/ten64.h @@ -9,7 +9,6 @@ #include "ls1088a_common.h" - #define CFG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd" diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 3795e6152fa..06276175455 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -9,7 +9,6 @@ #ifndef __CONFIG_TOPIC_MIAMI_H #define __CONFIG_TOPIC_MIAMI_H - /* Speed up boot time by ignoring the environment which we never used */ #include "zynq-common.h" diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 5d2956a5963..0da9250c3b7 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -92,7 +92,6 @@ #define CFG_SYS_FSL_USDHC_NUM 1 - #define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) /* USB Device Firmware Update support */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 8bd0716c08d..d93a45d5aae 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -36,5 +36,4 @@ "ramdisk_addr_r=0x4000000\0" \ "ramdiskfile=initramfs.gz\0" - #endif /* __CONFIG_H */ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 9655b666eda..468c5b85ab7 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -71,7 +71,6 @@ /* U-Boot autoboot configuration */ /*==============================*/ - /*=========================================*/ /* FPGA Registers (board info and control) */ /*=========================================*/ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 553bb1b45b6..03af859c951 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -185,7 +185,6 @@ #define CFG_SYS_INIT_RAM_ADDR 0xFFFF0000 #define CFG_SYS_INIT_RAM_SIZE 0x2000 - /* Extend size of kernel image for uncompression */ /* Address in RAM where the parameters must be copied by SPL. */ -- 2.43.0

2 1

[PATCH V3 0/4] Low Power Mode: Pakage TIFS Stub on BeaglePlay
by Dhruva Gole 05 Jul '24

05 Jul '24

This series includes the binman related changes required to package tIFS Stub to support Low Power Modes on BeaglePlay. Also, based on comments from previous patch [0] documentation has been added to describe small addition in boot flow as well as tispl image format. I am aware that the new boot flow image will need to be updated in other places like am62a, am62p and even other boards that use am62x. However, I would like to keep this series beagleplay TIFSStub specific and so I will be sending a follow up series to update other places seperately if that's ok. Changelog: * Add new image format for TISPL * Add new changes in boot flow for am62 family of devices. [0] https://lore.kernel.org/u-boot/20240618045610.271884-1-d-gole@ti.com/ Dhruva Gole (4): arm: dts: k3-am625-beagleplay: Package TIFS Stub doc: beagle: am62x_beagleplay: Update the boot flow to show TIFS Stub doc: beagle: am62x_beagleplay: Add TIFS Stub in image format doc: ti: k3: Add TIFS Stub documentation arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 33 +++++++++++++++++++- doc/board/beagle/am62x_beagleplay.rst | 4 +-- doc/board/ti/img/boot_diagram_am62.svg | 4 +++ doc/board/ti/img/tifsstub_dm_tispl.bin.svg | 4 +++ doc/board/ti/k3.rst | 5 +++ 5 files changed, 47 insertions(+), 3 deletions(-) create mode 100644 doc/board/ti/img/boot_diagram_am62.svg create mode 100644 doc/board/ti/img/tifsstub_dm_tispl.bin.svg base-commit: c53b344475734d0d29f522b7b1d80c5b8204442d -- 2.34.1

3 13

[PATCH 0/5] board: rockchip: Add Pine64 Quartz64 and SOQuartz boards
by Jonas Karlman 05 Jul '24

05 Jul '24

This series was created in collaboration with Nicolas Frattaroli and add support for Pine64 Quartz64 and SOQuartz boards with a RK3566 SoC. - Pine64 Quartz64-A Board - Pine64 Quartz64-B Board - Pine64 SOQuartz on Model A - Pine64 SOQuartz on Blade - Pine64 SOQuartz on CM4-IO Device trees have been imported from linux v6.4. This series have loose dependencies on the following series: - rockchip: Fix PCIe and NVMe support on RK3568 [1] - rockchip: rk3568: Use dwc3-generic driver [2] - rockchip: rk3568: Fix alloc space exhausted in SPL [3] - rockchip: rk3568: Device Tree updates [4] - rockchip: rk35xx: Fix SPI Flash alias [5] - board: rockchip: Add Hardkernel ODROID-M1 [6] A copy of this series with above dependencies can be found at [7]. [1] https://patchwork.ozlabs.org/project/uboot/list/?series=365195 [2] https://patchwork.ozlabs.org/project/uboot/list/?series=364127 [3] https://patchwork.ozlabs.org/project/uboot/list/?series=361999 [4] https://patchwork.ozlabs.org/project/uboot/list/?series=362030 [5] https://patchwork.ozlabs.org/project/uboot/list/?series=363527 [6] https://patchwork.ozlabs.org/project/uboot/list/?series=365198 [7] https://github.com/Kwiboo/u-boot-rockchip/commits/rk3568-quartz64-v1 Jonas Karlman (5): board: rockchip: Add Pine64 Quartz64-A Board board: rockchip: Add Pine64 Quartz64-B Board board: rockchip: Add Pine64 SOQuartz on Model A board: rockchip: Add Pine64 SOQuartz on Blade board: rockchip: Add Pine64 SOQuartz on CM4-IO arch/arm/dts/Makefile | 5 + arch/arm/dts/rk3566-quartz64-a-u-boot.dtsi | 55 ++ arch/arm/dts/rk3566-quartz64-a.dts | 839 ++++++++++++++++++ arch/arm/dts/rk3566-quartz64-b-u-boot.dtsi | 47 + arch/arm/dts/rk3566-quartz64-b.dts | 739 +++++++++++++++ .../arm/dts/rk3566-soquartz-blade-u-boot.dtsi | 3 + arch/arm/dts/rk3566-soquartz-blade.dts | 194 ++++ arch/arm/dts/rk3566-soquartz-cm4-u-boot.dtsi | 3 + arch/arm/dts/rk3566-soquartz-cm4.dts | 192 ++++ .../dts/rk3566-soquartz-model-a-u-boot.dtsi | 3 + arch/arm/dts/rk3566-soquartz-model-a.dts | 232 +++++ arch/arm/dts/rk3566-soquartz-u-boot.dtsi | 30 + arch/arm/dts/rk3566-soquartz.dtsi | 688 ++++++++++++++ arch/arm/mach-rockchip/rk3568/Kconfig | 6 + board/pine64/quartz64_rk3566/Kconfig | 15 + board/pine64/quartz64_rk3566/MAINTAINERS | 23 + board/pine64/quartz64_rk3566/Makefile | 3 + .../pine64/quartz64_rk3566/quartz64-rk3566.c | 1 + configs/quartz64-a-rk3566_defconfig | 110 +++ configs/quartz64-b-rk3566_defconfig | 106 +++ configs/soquartz-blade-rk3566_defconfig | 90 ++ configs/soquartz-cm4-rk3566_defconfig | 90 ++ configs/soquartz-model-a-rk3566_defconfig | 90 ++ doc/board/rockchip/rockchip.rst | 5 + include/configs/quartz64_rk3566.h | 10 + 25 files changed, 3579 insertions(+) create mode 100644 arch/arm/dts/rk3566-quartz64-a-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-quartz64-a.dts create mode 100644 arch/arm/dts/rk3566-quartz64-b-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-quartz64-b.dts create mode 100644 arch/arm/dts/rk3566-soquartz-blade-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-soquartz-blade.dts create mode 100644 arch/arm/dts/rk3566-soquartz-cm4-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-soquartz-cm4.dts create mode 100644 arch/arm/dts/rk3566-soquartz-model-a-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-soquartz-model-a.dts create mode 100644 arch/arm/dts/rk3566-soquartz-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-soquartz.dtsi create mode 100644 board/pine64/quartz64_rk3566/Kconfig create mode 100644 board/pine64/quartz64_rk3566/MAINTAINERS create mode 100644 board/pine64/quartz64_rk3566/Makefile create mode 100644 board/pine64/quartz64_rk3566/quartz64-rk3566.c create mode 100644 configs/quartz64-a-rk3566_defconfig create mode 100644 configs/quartz64-b-rk3566_defconfig create mode 100644 configs/soquartz-blade-rk3566_defconfig create mode 100644 configs/soquartz-cm4-rk3566_defconfig create mode 100644 configs/soquartz-model-a-rk3566_defconfig create mode 100644 include/configs/quartz64_rk3566.h -- 2.41.0

3 25

[PATCH 00/11] usb: gadget: Introduce handle_interrupts ops to USB_GADGET_GENERIC uclass
by Marek Vasut 05 Jul '24

05 Jul '24

Introduce .ops for USB_GADGET_GENERIC uclass. The first new ops is .handle_interrupts which must be implemented by DM capable USB gadget controller drivers and must implement interrupt handling similar to dm_usb_gadget_handle_interrupts(). For DM USB gadget drivers this is a replacement for dm_usb_gadget_handle_interrupts(). Convert the DM USB gadget drivers to this new ops instead. DEPENDS: https://patchwork.ozlabs.org/project/uboot/list/?series=410150 Marek Vasut (11): usb: gadget: Introduce handle_interrupts ops to USB_GADGET_GENERIC uclass usb: gadget: cdns3: Convert interrupt handling to usb_gadget_generic_ops usb: gadget: dwc2: Convert interrupt handling to usb_gadget_generic_ops usb: gadget: dwc3: Convert interrupt handling to usb_gadget_generic_ops usb: gadget: max3420: Convert interrupt handling to usb_gadget_generic_ops usb: gadget: mtu3: Convert interrupt handling to usb_gadget_generic_ops usb: gadget: omap2430: Convert interrupt handling to usb_gadget_generic_ops usb: gadget: musb: Convert interrupt handling to usb_gadget_generic_ops usb: gadget: ux500: Convert interrupt handling to usb_gadget_generic_ops usb: gadget: sandbox: Drop dm_usb_gadget_handle_interrupts() usb: gadget: Mark dm_usb_gadget_handle_interrupts as non-weak for DM_USB_GADGET drivers/usb/cdns3/core.c | 24 ++++++++++++++++++++++++ drivers/usb/cdns3/gadget-export.h | 2 ++ drivers/usb/cdns3/gadget.c | 11 +---------- drivers/usb/dwc3/dwc3-generic.c | 23 ++++++++++++++--------- drivers/usb/dwc3/dwc3-layerscape.c | 21 +++++++++++++-------- drivers/usb/gadget/dwc2_udc_otg.c | 20 +++++++++++++++----- drivers/usb/gadget/max3420_udc.c | 19 ++++++++++++------- drivers/usb/gadget/udc/udc-uclass.c | 24 ++++++++++++++++++++++++ drivers/usb/host/usb-sandbox.c | 7 +------ drivers/usb/mtu3/mtu3_plat.c | 23 ++++++++++++++--------- drivers/usb/musb-new/omap2430.c | 26 ++++++++++++++++---------- drivers/usb/musb-new/ti-musb.c | 23 ++++++++++++++--------- drivers/usb/musb-new/ux500.c | 22 ++++++++++++++-------- include/linux/usb/gadget.h | 8 ++++++++ 14 files changed, 172 insertions(+), 81 deletions(-) --- Cc: Alexander Sverdlin <alexander.sverdlin(a)siemens.com> Cc: Felipe Balbi <felipe.balbi(a)linux.intel.com> Cc: Lukasz Majewski <lukma(a)denx.de> Cc: Mattijs Korpershoek <mkorpershoek(a)baylibre.com> Cc: Nishanth Menon <nm(a)ti.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> Cc: Tom Rini <trini(a)konsulko.com> Cc: u-boot(a)lists.denx.de -- 2.43.0

4 25

[PATCH 1/6] usb: gadget: g_dnl: Drop usb_gadget_controller_number()
by Marek Vasut 05 Jul '24

05 Jul '24

The bcdDevice field is defined as |Device release number in binary-coded decimal in the USB 2.0 specification. We use this field to distinguish the UDCs from each other. In theory this could be used on the host side to apply certain quirks if the "special" UDC in combination with this gadget is used. This hasn't been done as far as I am aware. In practice it would be better to fix the UDC driver before shipping since a later release might not need this quirk anymore. This patch converts this gadget to use the U-Boot version instead of a random 2 or 3 plus the UDC number. Linux stopped using this functionality in 2012, remove it from U-Boot as well. Matching Linux kernel commit: ed9cbda63d45 ("usb: gadget: remove usb_gadget_controller_number()") Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Cc: Alexander Sverdlin <alexander.sverdlin(a)siemens.com> Cc: Felipe Balbi <felipe.balbi(a)linux.intel.com> Cc: Lukasz Majewski <lukma(a)denx.de> Cc: Mattijs Korpershoek <mkorpershoek(a)baylibre.com> Cc: Nishanth Menon <nm(a)ti.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> Cc: Tom Rini <trini(a)konsulko.com> Cc: u-boot(a)lists.denx.de --- drivers/usb/gadget/g_dnl.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index b5b5f5d8c11..631969b3405 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -17,10 +17,10 @@ #include <usb_mass_storage.h> #include <dfu.h> #include <thor.h> +#include <version.h> #include <env_callback.h> -#include "gadget_chips.h" #include "composite.c" /* @@ -199,18 +199,6 @@ void g_dnl_clear_detach(void) g_dnl_detach_request = false; } -static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev) -{ - struct usb_gadget *gadget = cdev->gadget; - int gcnum; - - gcnum = usb_gadget_controller_number(gadget); - if (gcnum > 0) - gcnum += 0x200; - - return g_dnl_get_board_bcd_device_number(gcnum); -} - /** * Update internal serial number variable when the "serial#" env var changes. * @@ -261,7 +249,8 @@ static int g_dnl_bind(struct usb_composite_dev *cdev) if (ret) goto error; - gcnum = g_dnl_get_bcd_device_number(cdev); + gcnum = g_dnl_get_board_bcd_device_number((U_BOOT_VERSION_NUM << 4) | + U_BOOT_VERSION_NUM_PATCH); if (gcnum >= 0) device_desc.bcdDevice = cpu_to_le16(gcnum); else { -- 2.43.0

4 15

[PATCH v2 1/1] efi_loader: print device-tree in dtbdump.efi
by Heinrich Schuchardt 05 Jul '24

05 Jul '24

The dtbdump.efi binary can be used for testing the EFI_DT_FIXUP_PROTOCOL. It provides a command to load a file and have it fixed up and a command to save the resulting file. Add a command 'dump' for displaying the device-tree. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- v2: print leading '/dts-v1/;' print memory reservation block allow space in string property value to match dtc logic correct formatting of byte strings --- lib/efi_loader/dtbdump.c | 261 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 261 insertions(+) diff --git a/lib/efi_loader/dtbdump.c b/lib/efi_loader/dtbdump.c index 5f39cf22da7..116593d9e25 100644 --- a/lib/efi_loader/dtbdump.c +++ b/lib/efi_loader/dtbdump.c @@ -40,6 +40,53 @@ static void print(u16 *string) cout->output_string(cout, string); } +/** + * print_char() - print character + * + * 0x00 is replaced by '", "'. + * + * @c: - character + */ +static void print_char(unsigned char c) +{ + u16 out[2] = u"?"; + + if (!c) { + print(u"\", \""); + return; + } + + if (c > 0x1f && c < 0x80) + out[0] = c; + + print(out); +} + +/** + * print_hex_digit() - print hexadecimal digit + * + * @digit: digit to print + */ +static void print_hex_digit(unsigned char digit) +{ + if (digit < 10) + digit += '0'; + else + digit += 'a' - 10; + print_char(digit); +} + +/** + * printx() - print hexadecimal byte + * + * @val: value to print + */ +static void printx(unsigned char val) +{ + print_hex_digit(val >> 4); + print_hex_digit(val & 0xf); +} + /** * error() - print error string * @@ -227,6 +274,7 @@ bool starts_with(u16 *string, u16 *keyword) */ void do_help(void) { + error(u"dump - print device-tree\r\n"); error(u"load <dtb> - load device-tree from file\r\n"); error(u"save <dtb> - save device-tree to file\r\n"); error(u"exit - exit the shell\r\n"); @@ -489,6 +537,217 @@ efi_status_t do_save(u16 *filename) return ret; } +/** + * indent() - print a number of tabstops + * + * @level: indentation level + */ +static void indent(u32 level) +{ + for (; level; --level) + print(u"\t"); +} + +/** + * is_string_value() - determine if property is a string + * + * If a property is a string, an x-string, or a u32 cannot be deducted + * from the device-tree. Therefore a heuristic is used. + * + * @str: pointer to device-tree property + * @len: length of the device-tree property + * Return: 1 for string, 0 otherwise + */ +static int is_string_value(const unsigned char *str, u32 len) +{ + int nonzero_flag = 0; + + /* Zero length or not ending with 0x00 */ + if (!len || str[len - 1]) + return 0; + + for (u32 i = 0; i < len; ++i) { + if (!str[i]) { + /* Zero length string or two consecutive 0x00 */ + if (!nonzero_flag) + return 0; + + nonzero_flag = 0; + + continue; + } + /* Non-printable */ + if (str[i] < 0x20 || str[i] >= 0x80) + return 0; + + nonzero_flag = 1; + } + + return 1; +} + +/** + * print_property() - print device-tree property + * + * If a property is a string, an x-string, or a u32 cannot be deducted + * from the device-tree. Therefore a heuristic is used. + * + * @str: property value + * @len: length of property value + */ +static void print_property(const unsigned char *val, u32 len) +{ + if (is_string_value(val, len)) { + /* string */ + print(u"\""); + for (int i = 0; i < len - 1; ++i) + print_char(val[i]); + print(u"\""); + } else if (len & 0x3) { + /* byte string */ + print(u"["); + for (int i = 0; i < len; ++i) { + if (i) + print(u" "); + printx(val[i]); + } + print(u"]\""); + } else { + /* cell list */ + print(u"<"); + for (u32 i = 0; i < len; ++i) { + if ((i & 0x3) == 0) { + if (i > 0) + print(u" "); + print(u"0x"); + } + printx(val[i]); + } + print(u">"); + } +} + +/** + * print_mem_res_block() - print memory reservation block + * + * @rsvblk: memory reservation block + */ +static void print_mem_res_block(const struct fdt_reserve_entry *rsvblk) +{ + for (; rsvblk->address || rsvblk->size; ++rsvblk) { + const unsigned char *val; + + print(u"/memreserve/ 0x"); + val = (const unsigned char *)&rsvblk->address; + for (u32 i = 0; i < sizeof(u64); ++i) + printx(val[i]); + print(u" 0x"); + val = (const unsigned char *)&rsvblk->size; + for (u32 i = 0; i < sizeof(u64); ++i) + printx(val[i]); + print(u";\r\n"); + } +} + +/** + * do_dump() - print device-tree + */ +static efi_status_t do_dump(void) +{ + const unsigned char *fdt; + struct fdt_header *header; + const u32 *end; + const u32 *pos; + const char *strings; + u32 level = 0; + + fdt = get_dtb(systable); + if (!fdt) { + error(u"DTB not found\r\n"); + return EFI_NOT_FOUND; + } + + header = (struct fdt_header *)fdt; + if (f2h(header->magic) != FDT_MAGIC) { + error(u"Wrong device tree magic\r\n"); + error(u"Not a device-tree\r\n"); + return EFI_LOAD_ERROR; + } + + pos = (u32 *)(fdt + f2h(header->off_dt_struct)); + end = &pos[f2h(header->totalsize) >> 2]; + strings = fdt + f2h(header->off_dt_strings); + + print(u"/dts-v1/;\r\n"); + + print_mem_res_block((const struct fdt_reserve_entry *) + (fdt + f2h(header->off_mem_rsvmap))); + + print(u"/"); + for (; pos < end;) { + switch (f2h(pos[0])) { + case FDT_BEGIN_NODE: { + const char *c = (char *)&pos[1]; + size_t i; + + indent(level); + for (i = 0; c[i]; ++i) + print_char(c[i]); + print(u" {\n\r"); + + ++level; + pos = &pos[2 + (i >> 2)]; + break; + } + case FDT_PROP: { + struct fdt_property *prop = (struct fdt_property *)pos; + const unsigned char *label = &strings[f2h(prop->nameoff)]; + u32 len = f2h(prop->len); + const unsigned char *str = (unsigned char *)&pos[3]; + + indent(level); + for (int i = 0; label[i]; ++i) + print_char(label[i]); + + if (len) { + print(u" = "); + print_property(str, len); + } + print(u";\r\n"); + + pos = &pos[3 + ((f2h(prop->len) + 3) >> 2)]; + break; + } + case FDT_NOP: + ++pos; + break; + case FDT_END_NODE: + if (!level) { + error(u"Extraneous end node\r\n"); + return EFI_LOAD_ERROR; + } + + --level; + indent(level); + print(u"};\n\r"); + ++pos; + break; + case FDT_END: + if (level) { + error(u"Missing end node\r\n"); + return EFI_LOAD_ERROR; + } + return EFI_SUCCESS; + default: + error(u"Invalid device tree token\r\n"); + return EFI_LOAD_ERROR; + } + } + error(u"Overrun\r\n"); + + return EFI_LOAD_ERROR; +} + /** * efi_main() - entry point of the EFI application. * @@ -524,6 +783,8 @@ efi_status_t EFIAPI efi_main(efi_handle_t image_handle, pos = skip_whitespace(command); if (starts_with(pos, u"exit")) break; + else if (starts_with(pos, u"dump")) + do_dump(); else if (starts_with(pos, u"load ")) do_load(pos + 5); else if (starts_with(pos, u"save ")) -- 2.45.2

2 1

[PATCH 1/2] led: Implement software led blinking
by Mikhail Kshevetskiy 05 Jul '24

05 Jul '24

From: Michael Polyntsov <michael.polyntsov(a)iopsys.eu> If hardware (or driver) doesn't support leds blinking, it's now possible to use software implementation of blinking instead. This relies on cyclic functions. Signed-off-by: Michael Polyntsov <michael.polyntsov(a)iopsys.eu> Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy(a)iopsys.eu> --- drivers/led/Kconfig | 9 ++ drivers/led/led-uclass.c | 190 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 195 insertions(+), 4 deletions(-) diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index 9837960198d..4330f014239 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -73,6 +73,15 @@ config LED_BLINK This option enables support for this which adds slightly to the code size. +config LED_SW_BLINK + bool "Support software LED blinking" + depends on LED_BLINK + select CYCLIC + help + Turns on led blinking implemented in the software, useful when + the hardware doesn't support led blinking. Does nothing if + driver supports blinking. + config SPL_LED bool "Enable LED support in SPL" depends on SPL_DM diff --git a/drivers/led/led-uclass.c b/drivers/led/led-uclass.c index a4be56fc258..b35964f2e99 100644 --- a/drivers/led/led-uclass.c +++ b/drivers/led/led-uclass.c @@ -15,6 +15,10 @@ #include <dm/root.h> #include <dm/uclass-internal.h> +#ifdef CONFIG_LED_SW_BLINK +#include <malloc.h> +#endif + int led_bind_generic(struct udevice *parent, const char *driver_name) { struct udevice *dev; @@ -41,6 +45,7 @@ int led_get_by_label(const char *label, struct udevice **devp) ret = uclass_get(UCLASS_LED, &uc); if (ret) return ret; + uclass_foreach_dev(dev, uc) { struct led_uc_plat *uc_plat = dev_get_uclass_plat(dev); @@ -52,14 +57,180 @@ int led_get_by_label(const char *label, struct udevice **devp) return -ENODEV; } -int led_set_state(struct udevice *dev, enum led_state_t state) +#ifdef CONFIG_LED_SW_BLINK + +enum led_sw_blink_state_t { + LED_SW_BLINK_ST_OFF = 0, + LED_SW_BLINK_ST_ON = 1, + LED_SW_BLINK_ST_NONE = 2, +}; + +struct sw_blink_state { + struct udevice *dev; + enum led_sw_blink_state_t cur_blink_state; +}; + +static bool led_driver_supports_hw_blinking(const struct udevice *dev) +{ + struct led_ops *ops = led_get_ops(dev); + + /* + * We assume that if driver supports set_period, then it correctly + * handles all other requests, for example, that + * led_set_state(LEDST_BLINK) works correctly. + */ + return ops->set_period != NULL; +} + +static const char *led_sw_label_to_cyclic_func_name(const char *label) +{ +#define MAX_NAME_LEN 50 + static char cyclic_func_name[MAX_NAME_LEN] = {0}; + + snprintf(cyclic_func_name, MAX_NAME_LEN, "sw_blink_%s", label); + return cyclic_func_name; +#undef MAX_NAME_LEN +} + +static struct cyclic_info *led_sw_find_blinking_led(const char *label) +{ + struct cyclic_info *cyclic; + const char *cyclic_name; + + cyclic_name = led_sw_label_to_cyclic_func_name(label); + + hlist_for_each_entry(cyclic, cyclic_get_list(), list) { + if (strcmp(cyclic->name, cyclic_name) == 0) + return cyclic; + } + + return NULL; +} + +static bool led_sw_is_blinking(struct udevice *dev) +{ + struct led_uc_plat *uc_plat = dev_get_uclass_plat(dev); + struct cyclic_info *cyclic = led_sw_find_blinking_led(uc_plat->label); + + if (cyclic != NULL) { + struct sw_blink_state *state; + + state = (struct sw_blink_state *)cyclic->ctx; + return state->cur_blink_state != LED_SW_BLINK_ST_NONE; + } + + return false; +} + +static void led_sw_blink(void *void_state) +{ + struct sw_blink_state *state = (struct sw_blink_state *)void_state; + struct udevice *dev = state->dev; + struct led_ops *ops = led_get_ops(dev); + + switch (state->cur_blink_state) { + case LED_SW_BLINK_ST_OFF: + state->cur_blink_state = LED_SW_BLINK_ST_ON; + ops->set_state(dev, LEDST_ON); + break; + case LED_SW_BLINK_ST_ON: + state->cur_blink_state = LED_SW_BLINK_ST_OFF; + ops->set_state(dev, LEDST_OFF); + break; + case LED_SW_BLINK_ST_NONE: + /* + * led_set_period has been called, but + * led_set_state(LDST_BLINK) has not yet, + * so doing nothing + */ + break; + } +} + +static void led_sw_free_cyclic(struct cyclic_info *cyclic) +{ + free(cyclic->ctx); + cyclic_unregister(cyclic); +} + +static int led_sw_set_period(struct udevice *dev, int period_ms) +{ + struct cyclic_info *cyclic; + struct sw_blink_state *state; + struct led_uc_plat *uc_plat = dev_get_uclass_plat(dev); + const char *cyclic_func_name; + + state = malloc(sizeof(struct sw_blink_state)); + if (state == NULL) { + printf("Allocating memory for sw_blink_state for %s failed\n", + uc_plat->label); + return -ENOMEM; + } + + state->cur_blink_state = LED_SW_BLINK_ST_NONE; + state->dev = dev; + + /* + * Make sure that there is no cyclic function already + * registered for this label + */ + cyclic = led_sw_find_blinking_led(uc_plat->label); + if (cyclic != NULL) + led_sw_free_cyclic(cyclic); + + cyclic_func_name = led_sw_label_to_cyclic_func_name(uc_plat->label); + + cyclic = cyclic_register(led_sw_blink, period_ms * 1000, + cyclic_func_name, (void *)state); + if (cyclic == NULL) { + printf("Registering of blinking function for %s failed\n", + uc_plat->label); + free(state); + return -ENOMEM; + } + + return 0; +} + +#endif + +int led_set_state(struct udevice *dev, enum led_state_t new_state) { struct led_ops *ops = led_get_ops(dev); if (!ops->set_state) return -ENOSYS; - return ops->set_state(dev, state); +#ifdef CONFIG_LED_SW_BLINK + if (!led_driver_supports_hw_blinking(dev)) { + struct cyclic_info *cyclic; + struct led_uc_plat *uc_plat = dev_get_uclass_plat(dev); + + cyclic = led_sw_find_blinking_led(uc_plat->label); + + if (cyclic != NULL) { + if (new_state == LEDST_BLINK) { + struct sw_blink_state *cur_st; + + cur_st = (struct sw_blink_state *)cyclic->ctx; + + /* + * Next call to led_sw_blink will start blinking + */ + cur_st->cur_blink_state = LED_SW_BLINK_ST_OFF; + return 0; + } + + /* + * Changing current blinking state to + * something else + */ + led_sw_free_cyclic(cyclic); + } + } +#endif + + return ops->set_state(dev, new_state); } enum led_state_t led_get_state(struct udevice *dev) @@ -69,19 +240,31 @@ enum led_state_t led_get_state(struct udevice *dev) if (!ops->get_state) return -ENOSYS; +#ifdef CONFIG_LED_SW_BLINK + if (!led_driver_supports_hw_blinking(dev) && led_sw_is_blinking(dev)) + return LEDST_BLINK; +#endif + return ops->get_state(dev); } #ifdef CONFIG_LED_BLINK + int led_set_period(struct udevice *dev, int period_ms) { struct led_ops *ops = led_get_ops(dev); - if (!ops->set_period) + if (!ops->set_period) { +#ifdef CONFIG_LED_SW_BLINK + return led_sw_set_period(dev, period_ms); +#else return -ENOSYS; +#endif + } return ops->set_period(dev, period_ms); } + #endif static int led_post_bind(struct udevice *dev) @@ -113,7 +296,6 @@ static int led_post_bind(struct udevice *dev) * probe() to configure its default state during startup. */ dev_or_flags(dev, DM_FLAG_PROBE_AFTER_BIND); - return 0; } -- 2.43.0

6 13

[PATCH v2] arm: mvebu: Enable bootstd and other modernization for Synology DS414 (Armada XP) board
by Tony Dinh 05 Jul '24

05 Jul '24

- Switch to standard boot (in include/configs/ds414.h and configs/ds414_defconfig) - Implement board_late_init() to ensure successful enumeration of USB3 devices - Remove unnecessary misc_init_r(), since NET_RANDOM_ETHADDR is now configured in - Remove unnecessary checkboard() - Updated IDENT_STRING to indicate this u-boot supports both Synology DS414 and DS214+ boards - Add SYS_THUMB_BUILD to reduce binary size - Add NET_RANDOM_ETHADDR - Add CONFIG_LBA48 and CONFIG_SYS_64BIT_LBA to support >2TB HDD/SDD Signed-off-by: Tony Dinh <mibodhi(a)gmail.com> --- Changes in v2: - Define EXTRA_ENV_SETTINGS_LEGACY to restore default envs support for booting legacy FW. board/Synology/ds414/ds414.c | 15 ++------- configs/ds414_defconfig | 20 +++++------ include/configs/ds414.h | 65 +++++++++++++++++++++++++----------- 3 files changed, 57 insertions(+), 43 deletions(-) diff --git a/board/Synology/ds414/ds414.c b/board/Synology/ds414/ds414.c index abe6f9eb5e..f0b55fa095 100644 --- a/board/Synology/ds414/ds414.c +++ b/board/Synology/ds414/ds414.c @@ -181,18 +181,9 @@ int board_init(void) return 0; } -int misc_init_r(void) +int board_late_init(void) { - if (!env_get("ethaddr")) { - puts("Incomplete environment, populating from SPI flash\n"); - do_syno_populate(0, NULL); - } - return 0; -} - -int checkboard(void) -{ - puts("Board: DS414\n"); - + /* Do late init to ensure successful enumeration of XHCI devices */ + pci_init(); return 0; } diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig index ecf9501ba5..501ed51129 100644 --- a/configs/ds414_defconfig +++ b/configs/ds414_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_CPU_INIT=y +CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MVEBU=y CONFIG_SUPPORT_PASSING_ATAGS=y CONFIG_CMDLINE_TAG=y @@ -25,44 +26,40 @@ CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xf1012000 CONFIG_DEBUG_UART_CLOCK=250000000 +CONFIG_IDENT_STRING="\nSynology DS214+/DS414 2/4-Bay Diskstation" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_PCI=y CONFIG_DEBUG_UART=y +CONFIG_BOOTSTD_FULL=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1" -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="sf probe; sf read ${loadaddr} 0xd0000 0x2d0000; sf read ${ramdisk_addr_r} 0x3a0000 0x430000; bootm ${loadaddr} ${ramdisk_addr_r}" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_MISC_INIT_R=y +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x1bfd0 CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_I2C=y +CONFIG_SYS_PROMPT="DS414> " CONFIG_SYS_MAXARGS=32 CONFIG_CMD_I2C=y CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_TIME=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_CMD_UBI=y -CONFIG_ISO_PARTITION=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ARP_TIMEOUT=200 CONFIG_NET_RETRY_COUNT=50 +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_OF_TRANSLATE=y +CONFIG_LBA48=y +CONFIG_SYS_64BIT_LBA=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y # CONFIG_MMC is not set @@ -83,4 +80,3 @@ CONFIG_USB_XHCI_HCD=y # CONFIG_USB_XHCI_MVEBU is not set CONFIG_USB_XHCI_PCI=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 9446acba79..89e55bf0d4 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -1,5 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* + * Copyright (C) 2024 Tony Dinh <mibodhi(a)gmail.com> * Copyright (C) 2014 Stefan Roese <sr(a)denx.de> */ @@ -16,14 +17,9 @@ * U-Boot into it. */ -/* I2C */ #define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" +#define PHY_ANEG_TIMEOUT 16000 /* PHY needs a longer aneg time */ /* * Memory layout while starting into the bin_hdr via the @@ -38,23 +34,54 @@ * L2 cache thus cannot be used. */ -/* SPL */ -/* Defines for SPL */ +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define RELOCATION_LIMITS_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" -/* Default Environment */ +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" -#define CFG_EXTRA_ENV_SETTINGS \ - "initrd_high=0xffffffff\0" \ - "ramdisk_addr_r=0x8000000\0" \ - "usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0" \ - "ethmtu=1500\0eth1mtu=1500\0" \ - "update_uboot=sf probe; dhcp; " \ - "mw.b ${loadaddr} 0x0 0xd0000; " \ - "tftpboot ${loadaddr} u-boot-with-spl.kwb; " \ +#ifndef CONFIG_SPL_BUILD + +#define KERNEL_ADDR_R __stringify(0x1000000) +#define FDT_ADDR_R __stringify(0x2000000) +#define RAMDISK_ADDR_R __stringify(0x2200000) +#define SCRIPT_ADDR_R __stringify(0x1800000) +#define PXEFILE_ADDR_R __stringify(0x1900000) + +#define EXTRA_ENV_SETTINGS_LEGACY \ + "bootargs_legacy=console=ttyS0,115200 ip=off initrd=0x8000040,8M " \ + "root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 " \ + "flash_size=8 SataLedSpecial=1 HddHotplug=1\0" \ + "bootcmd_legacy=sf probe; sf read ${loadaddr} 0xd0000 0x2d0000; " \ + "sf read ${ramdisk_addr_r} 0x3a0000 0x430000; " \ + "run bootargs_legacy; " \ + "bootm ${loadaddr} ${ramdisk_addr_r}\0" \ + "usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0" \ + "ethmtu=1500\0eth1mtu=1500\0" \ + "update_uboot=sf probe; dhcp; " \ + "mw.b ${loadaddr} 0x0 0xd0000; " \ + "tftpboot ${loadaddr} u-boot-with-spl.kwb; " \ "sf update ${loadaddr} 0x0 0xd0000\0" +#define LOAD_ADDRESS_ENV_SETTINGS \ + "kernel_addr_r=" KERNEL_ADDR_R "\0" \ + "fdt_addr_r=" FDT_ADDR_R "\0" \ + "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \ + "scriptaddr=" SCRIPT_ADDR_R "\0" \ + "pxefile_addr_r=" PXEFILE_ADDR_R "\0" + +#define CFG_EXTRA_ENV_SETTINGS \ + RELOCATION_LIMITS_ENV_SETTINGS \ + LOAD_ADDRESS_ENV_SETTINGS \ + EXTRA_ENV_SETTINGS_LEGACY \ + "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ + "console=ttyS0,115200\0" -/* increase autoneg timeout, my NIC sucks */ -#define PHY_ANEG_TIMEOUT 16000 +#endif /* CONFIG_SPL_BUILD */ #endif /* _CONFIG_SYNOLOGY_DS414_H */ -- 2.39.2

2 5

[PATCH v3 00/12] xtensa: Enable qemu-xtensa board
by Jiaxun Yang 05 Jul '24

05 Jul '24

Hi all, This series enabled qemu-xtensa board. For dc232b CPU it needs to be built with toolchain[1]. This is a side product of me investigating architectures physical address != virtual address in U-Boot. Now we can get it covered under CI and regular tests. VirtIO devices are not working as expected, due to U-Boot's assumption on VA == PA everywhere, I'm going to get this fixed later. My Xtensa knowledge is pretty limited, Xtensa people please feel free to point out if I got anything wrong. Thanks [1]: https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2… Signed-off-by: Jiaxun Yang <jiaxun.yang(a)flygoat.com> --- Changes in v3: - Wire up CI - Switch to dc233c CPU, which does not have PA != VA issue, to get CI pass first. - Link to v2: https://lore.kernel.org/r/20240522-qemu-xtensa-v2-0-04bf7e42b10b@flygoat.com Changes in v2: - Fix noMMU memory mappings - Addressing Max's comments in other patches - Link to v1: https://lore.kernel.org/r/20240519-qemu-xtensa-v1-0-8fff0cb11c19@flygoat.com --- Jiaxun Yang (12): xtensa: Move dram_init to xtfpga board file xtensa: Correct define of _end symbol xtensa: Implement phys virt conversion for PTP_MMU xtensa: Define PLATFORM_ELFFLAGS xtensa: Bring in semihosting headers and config options drivers: serial: Add xtensa semihosting driver drivers: cpu: Add xtensa CPU driver dts/upsteam: Add Makefile for xtensa board: emulation: New board qemu-xtensa doc: New documentation for qemu-xtensa ci: Wire up qemu_xtensa_dc233c [NFC]: CI Changes .azure-pipelines.yml | 5 +- .gitlab-ci.yml | 6 ++ arch/xtensa/Kconfig | 32 +++++++ arch/xtensa/config.mk | 6 ++ arch/xtensa/cpu/cpu.c | 5 - arch/xtensa/cpu/u-boot.lds | 2 + arch/xtensa/dts/virt-u-boot.dtsi | 17 ++++ arch/xtensa/include/asm/addrspace.h | 2 + arch/xtensa/include/asm/io.h | 32 +++++++ arch/xtensa/include/asm/ldscript.h | 1 - arch/xtensa/include/asm/platform/simcall-gdbio.h | 34 +++++++ arch/xtensa/include/asm/platform/simcall-iss.h | 73 ++++++++++++++ arch/xtensa/include/asm/platform/simcall.h | 110 +++++++++++++++++++++ board/cadence/xtfpga/xtfpga.c | 5 + board/emulation/qemu-xtensa/Kconfig | 43 +++++++++ board/emulation/qemu-xtensa/MAINTAINERS | 8 ++ board/emulation/qemu-xtensa/Makefile | 5 + board/emulation/qemu-xtensa/qemu-xtensa.c | 60 ++++++++++++ configs/qemu-xtensa-dc233c_defconfig | 32 +++++++ doc/board/emulation/index.rst | 1 + doc/board/emulation/qemu-xtensa.rst | 33 +++++++ drivers/cpu/Kconfig | 6 ++ drivers/cpu/Makefile | 1 + drivers/cpu/xtensa_cpu.c | 117 +++++++++++++++++++++++ drivers/serial/Kconfig | 18 +++- drivers/serial/Makefile | 1 + drivers/serial/serial_xtensa_semihosting.c | 92 ++++++++++++++++++ dts/upstream/src/xtensa/Makefile | 14 +++ include/configs/qemu-xtensa.h | 36 +++++++ 29 files changed, 789 insertions(+), 8 deletions(-) --- base-commit: 3be9f399e911cfc437a37ac826441f1d96da1c9b change-id: 20240519-qemu-xtensa-5fb95bb474e9 Best regards, -- Jiaxun Yang <jiaxun.yang(a)flygoat.com>

2 13