May 2024 - U-Boot

[PATCH 1/1] andes: Use UCCTLCOMMAND instead of MCCTLCOMMAND
by Leo Yu-Chi Liang 28 May '24

28 May '24

Use CSR_UCCTLCOMMAND instead of CSR_MCCTLCOMMAND to do cache flush operation in M-mode and S-mode. Signed-off-by: Leo Yu-Chi Liang <ycliang(a)andestech.com> --- arch/riscv/cpu/andes/cache.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/riscv/cpu/andes/cache.c b/arch/riscv/cpu/andes/cache.c index 7d3df8722d..bb57498d75 100644 --- a/arch/riscv/cpu/andes/cache.c +++ b/arch/riscv/cpu/andes/cache.c @@ -43,9 +43,7 @@ static void cache_ops(int (*ops)(struct udevice *dev)) void flush_dcache_all(void) { -#if CONFIG_IS_ENABLED(RISCV_MMODE) - csr_write(CSR_MCCTLCOMMAND, CCTL_L1D_WBINVAL_ALL); -#endif + csr_write(CSR_UCCTLCOMMAND, CCTL_L1D_WBINVAL_ALL); } void flush_dcache_range(unsigned long start, unsigned long end) -- 2.34.1

1 0

[PATCH] clock: qcom: ipq4019: add I2C clocks
by Robert Marko 28 May '24

28 May '24

I2C clocks are not initialized by the SBL, so lets add support for clocks required by both of the QUP I2C controllers. BLSP1 AHB clock is already initialized by SBL, but QUP I2C driver is requesting it so we have to add it to the enable list. Based off QCS404 clock driver. Signed-off-by: Robert Marko <robert.marko(a)sartura.hr> --- drivers/clk/qcom/clock-ipq4019.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/clk/qcom/clock-ipq4019.c b/drivers/clk/qcom/clock-ipq4019.c index fca7626ada..73dbd25811 100644 --- a/drivers/clk/qcom/clock-ipq4019.c +++ b/drivers/clk/qcom/clock-ipq4019.c @@ -16,6 +16,12 @@ #include "clock-qcom.h" +/* I2C controller clock control registerss */ +#define BLSP1_QUP1_I2C_APPS_CBCR (0x2008) +#define BLSP1_QUP1_I2C_APPS_CMD_RCGR (0x200C) +#define BLSP1_QUP2_I2C_APPS_CBCR (0x3010) +#define BLSP1_QUP2_I2C_APPS_CMD_RCGR (0x3000) + static ulong ipq4019_clk_set_rate(struct clk *clk, ulong rate) { switch (clk->id) { @@ -29,7 +35,22 @@ static ulong ipq4019_clk_set_rate(struct clk *clk, ulong rate) static int ipq4019_clk_enable(struct clk *clk) { + struct msm_clk_priv *priv = dev_get_priv(clk->dev); + switch (clk->id) { + case GCC_BLSP1_AHB_CLK: + /* This clock is already initialized by SBL1 */ + return 0; + case GCC_BLSP1_QUP1_I2C_APPS_CLK: + clk_enable_cbc(priv->base + BLSP1_QUP1_I2C_APPS_CBCR); + clk_rcg_set_rate(priv->base, BLSP1_QUP1_I2C_APPS_CMD_RCGR, 0, + CFG_CLK_SRC_CXO); + return 0; + case GCC_BLSP1_QUP2_I2C_APPS_CLK: + clk_enable_cbc(priv->base + BLSP1_QUP2_I2C_APPS_CBCR); + clk_rcg_set_rate(priv->base, BLSP1_QUP2_I2C_APPS_CMD_RCGR, 0, + CFG_CLK_SRC_CXO); + return 0; case GCC_BLSP1_QUP1_SPI_APPS_CLK: /*SPI1*/ /* This clock is already initialized by SBL1 */ return 0; -- 2.45.1

1 0

[PATCH] arm: dts: k3-j721e-r5-common-proc-board: Set parent clock for clock ID 342
by Neha Malcom Francis 28 May '24

28 May '24

From: Apurva Nandan <a-nandan(a)ti.com> This virtual clock mux configuration enables the use of dynamic frequency scaling on A72 clock ID 202 by setting up the required register. Signed-off-by: Apurva Nandan <a-nandan(a)ti.com> Signed-off-by: Neha Malcom Francis <n-francis(a)ti.com> --- Boot logs: https://gist.github.com/nehamalcom/138d25fe32d4d80af3e0e4c19c1b18e0 arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts index 9655ca21d02..25e4b4c7663 100644 --- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts @@ -28,7 +28,8 @@ <&k3_pds 4 TI_SCI_PD_EXCLUSIVE>; resets = <&k3_reset 202 0>; clocks = <&k3_clks 61 1>; - assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>; + assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>, <&k3_clks 342 0>; + assigned-clock-parents= <0>, <0>, <&k3_clks 342 2>; assigned-clock-rates = <2000000000>, <200000000>; ti,sci = <&dmsc>; ti,sci-proc-id = <32>; -- 2.34.1

2 2

[PATCH] mmc: return immediately once the dwmci data transfer fails
by linjunbao 28 May '24

28 May '24

Originally, when the host is in dma mode, the return status of dwmci_data_transfer() gets overlapped by the latter DWMCI_IDINTEN query. When the data transfer fails and the query succeeds, the failure gets escaped. Add quick return when data transfer fails. Signed-off-by: linjunbao <meljbao(a)gmail.com> --- drivers/mmc/dw_mmc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index e103664145..e04872c432 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -372,6 +372,10 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, if (data) { ret = dwmci_data_transfer(host, data); + if (ret) { + debug("DWMCI data transfer fail.\n"); + return ret; + } /* only dma mode need it */ if (!host->fifo_mode) { -- 2.25.1

1 0

[PATCH] mmc: return immediately once the dwmci data transfer fails
by linjunbao 28 May '24

28 May '24

Originally, when the host is in dma mode, the return status of dwmci_data_transfer() gets overlapped by the latter DWMCI_IDINTEN query. When the data transfer fails and the query succeeds, the failure gets escaped. Add quick return when data transfer fails. Signed-off-by: linjunbao <meljbao(a)gmail.com> --- drivers/mmc/dw_mmc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index e103664145..e04872c432 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -372,6 +372,10 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, if (data) { ret = dwmci_data_transfer(host, data); + if (ret) { + debug("DWMCI data transfer fail.\n"); + return ret; + } /* only dma mode need it */ if (!host->fifo_mode) { -- 2.25.1

1 0

[PATCH] configs: add mvebu_espressobin_ultra-88f3720_defconfig
by Benjamin Schneider 27 May '24

27 May '24

Add support for a Marvell Armada 3720 device variant Signed-off-by: Benjamin Schneider <ben(a)bens.haus> --- .../mvebu_espressobin_ultra-88f3720_defconfig | 106 ++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 configs/mvebu_espressobin_ultra-88f3720_defconfig diff --git a/configs/mvebu_espressobin_ultra-88f3720_defconfig b/configs/mvebu_espressobin_ultra-88f3720_defconfig new file mode 100644 index 0000000000..d1be090731 --- /dev/null +++ b/configs/mvebu_espressobin_ultra-88f3720_defconfig @@ -0,0 +1,106 @@ +CONFIG_ARM=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_MVEBU=y +CONFIG_TEXT_BASE=0x00000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 +CONFIG_TARGET_MVEBU_ARMADA_37XX=y +CONFIG_SF_DEFAULT_SPEED=40000000 +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0x3F0000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DM_GPIO=y +CONFIG_OF_UPSTREAM=y +CONFIG_DEFAULT_DEVICE_TREE="marvell/armada-3720-espressobin-ultra" +CONFIG_SYS_LOAD_ADDR=0x6000000 +CONFIG_PCI=y +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_DISTRO_DEFAULTS=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_PREBOOT=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SATA=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_WDT=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_BTRFS=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_SQUASHFS=y +CONFIG_CMD_FS_UUID=y +CONFIG_MAC_PARTITION=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ARP_TIMEOUT=200 +CONFIG_NET_RETRY_COUNT=50 +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_AHCI_PCI=y +CONFIG_AHCI_MVEBU=y +CONFIG_LBA48=y +CONFIG_SYS_64BIT_LBA=y +CONFIG_CLK=y +CONFIG_CLK_MVEBU=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MV=y +CONFIG_MISC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_XENON=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_DM_DSA=y +CONFIG_MV88E6XXX=y +CONFIG_MVNETA=y +CONFIG_MVMDIO=y +CONFIG_NVME_PCI=y +CONFIG_PCI_AARDVARK=y +CONFIG_PHY=y +CONFIG_MVEBU_COMPHY_SUPPORT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ARMADA_37XX=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DEFAULT_ENV_IS_RW=y +CONFIG_MVEBU_A3700_UART=y +CONFIG_MVEBU_A3700_SPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_WATCHDOG_AUTOSTART is not set +CONFIG_WDT=y +CONFIG_WDT_ARMADA_37XX=y +CONFIG_SHA1=y +CONFIG_DM_RTC=y +CONFIG_RTC_PCF8563=y +# CONFIG_DEBUG_UART=y +# CONFIG_DEBUG_UART_BASE=0xd0012000 +# CONFIG_DEBUG_UART_CLOCK=25804800 +# CONFIG_DEBUG_UART_SHIFT=2 +# CONFIG_DEBUG_UART_ANNOUNCE=y \ No newline at end of file -- 2.45.1

2 1

Pull request for tpm-master-27052024
by Ilias Apalodimas 27 May '24

27 May '24

Hi Tom I know it's not early in the release and although this contains a new feature apart from fixes, I prefer this going into -master. The added feature is on a TPM cmd and is harmless. If you only want the fixes please let me know and I'll send the rest in -next The following changes since commit a7f0154c412859323396111dd0c09dbafbc153cb: Prepare v2024.07-rc3 (2024-05-20 10:05:16 -0600) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-tpm/ tags/tpm-master-27052024 for you to fetch changes up to 89aa8463cdf3919ca4f04fc24ec8b154ff56d97e: tpm-v2: allow algorithm name to be configured for pcr_read and pcr_extend (2024-05-27 09:00:27 +0300) The CI https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/20873 had no issues Please consider pulling Thanks /Ilias ---------------------------------------------------------------- Tim fixed - An inconsistency in the reported active PCR banks. This was only affecting EFI applications requesting the active PCR banks from the TPM. - Adjusted the error message when a reset GPIO for the TPM was not found. It now prints a reasonable error message, instead of just printing that GPIO was not found - Enhanced the tpm command functionality. We can now define the algorithm(sha1, 256 etc) we want to use while extending or reading PCRs ---------------------------------------------------------------- Tim Harvey (3): tpm: display warning if using gpio reset with TPM tpm-v2: add support for mapping algorithm names to algos tpm-v2: allow algorithm name to be configured for pcr_read and pcr_extend cmd/tpm-v2.c | 49 +++++++++++++++++++-------- drivers/tpm/tpm2_tis_spi.c | 21 +++++++----- include/tpm-v2.h | 77 +++++++++++++++++++++++++++++++++++++++++-- lib/efi_loader/efi_tcg2.c | 6 ++-- lib/tpm-v2.c | 82 +++++++++++++++++++++++++++++----------------- test/py/tests/test_tpm2.py | 2 +- 6 files changed, 177 insertions(+), 60 deletions(-)

3 4

[PATCH v3 0/7] add ArmSoM Sige7 Rk3588 board
by Jianfeng Liu 27 May '24

27 May '24

Devicetree of ArmSoM Sige7 is merged to kernel v6.10-rc1 with USBDP and GPU nodes. So I use update-dts-subtree.sh to pick related commits of rk3588s.dtsi, and then pick the commit of ArmSoM Sige7's devicetree. I also did run command: ./dts/update-dts-subtree.sh pull v6.10-rc1-dts based on my work but there is a merge conflict of file: dts/upstream/Bindings/Makefile I think this should not be related to my work. Changes in v3: - Use update-dts-subtree.sh to pick upstream dts Changes in v2: - Fix alphabetical order of MAINTAINERS - Use arch/arm/dts/rk3588-armsom-sige7* in board MAINTAINERS - Remove spi flash related config - Move kernel dts to dts/upstream/src/arm64/rockchip/ Boris Brezillon (1): arm64: dts: rockchip: Add rk3588 GPU node Diederik de Haas (1): arm64: dts: rockchip: Fix ordering of nodes on rk3588s Jianfeng Liu (2): arm64: dts: rockchip: Add ArmSom Sige7 board board: rockchip: add ArmSoM Sige7 Rk3588 board Sebastian Reichel (3): arm64: dts: rockchip: fix usb2phy nodename for rk3588 arm64: dts: rockchip: add USBDP phys on rk3588 arm64: dts: rockchip: add USB3 DRD controllers on rk3588 MAINTAINERS | 1 + arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 28 + arch/arm/mach-rockchip/rk3588/Kconfig | 26 + board/armsom/sige7-rk3588/Kconfig | 12 + board/armsom/sige7-rk3588/MAINTAINERS | 7 + configs/sige7-rk3588_defconfig | 93 +++ doc/board/rockchip/rockchip.rst | 1 + .../arm64/rockchip/rk3588-armsom-sige7.dts | 721 ++++++++++++++++++ dts/upstream/src/arm64/rockchip/rk3588.dtsi | 72 ++ dts/upstream/src/arm64/rockchip/rk3588s.dtsi | 337 +++++--- include/configs/sige7-rk3588.h | 15 + 11 files changed, 1215 insertions(+), 98 deletions(-) create mode 100644 arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi create mode 100644 board/armsom/sige7-rk3588/Kconfig create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS create mode 100644 configs/sige7-rk3588_defconfig create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts create mode 100644 include/configs/sige7-rk3588.h -- 2.34.1

3 10

[PATCH] riscv: dts: jh7110: Update qspi node with upstream
by matthias.bgg＠kernel.org 27 May '24

27 May '24

From: Matthias Brugger <mbrugger(a)suse.com> Upstream node uses a specific SoC compatible to make the kernel driver work. Copy over the upstream node to fullfill that need. Signed-off-by: Matthias Brugger <mbrugger(a)suse.com> --- .../jh7110-starfive-visionfive-2-u-boot.dtsi | 2 +- .../dts/jh7110-starfive-visionfive-2.dtsi | 29 ++++++++++++++++--- arch/riscv/dts/jh7110.dtsi | 19 +++++++----- 3 files changed, 37 insertions(+), 13 deletions(-) diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2-u-boot.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2-u-boot.dtsi index 3012466b305..a69d8fcb391 100644 --- a/arch/riscv/dts/jh7110-starfive-visionfive-2-u-boot.dtsi +++ b/arch/riscv/dts/jh7110-starfive-visionfive-2-u-boot.dtsi @@ -40,7 +40,7 @@ &qspi { bootph-pre-ram; - nor-flash@0 { + nor_flash@0 { bootph-pre-ram; }; }; diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi index e11babc1cde..375449b73a8 100644 --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi @@ -305,17 +305,38 @@ }; &qspi { - spi-max-frequency = <250000000>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; - nor-flash@0 { + nor_flash: nor_flash@0 { compatible = "jedec,spi-nor"; - reg=<0>; - spi-max-frequency = <100000000>; + reg = <0>; + cdns,read-delay = <5>; + spi-max-frequency = <12000000>; cdns,tshsl-ns = <1>; cdns,tsd2d-ns = <1>; cdns,tchsh-ns = <1>; cdns,tslch-ns = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + spl@0 { + reg = <0x0 0x80000>; + }; + uboot-env@f0000 { + reg = <0xf0000 0x10000>; + }; + uboot@100000 { + reg = <0x100000 0x400000>; + }; + reserved-data@600000 { + reg = <0x600000 0xa00000>; + }; + }; }; }; diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi index 2cdc683d49b..2b331e58497 100644 --- a/arch/riscv/dts/jh7110.dtsi +++ b/arch/riscv/dts/jh7110.dtsi @@ -480,19 +480,22 @@ }; qspi: spi@13010000 { - compatible = "cdns,qspi-nor"; - reg = <0x0 0x13010000 0x0 0x10000 - 0x0 0x21000000 0x0 0x400000>; - clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>; - clock-names = "clk_ref"; + compatible = "starfive,jh7110-qspi", "cdns,qspi-nor"; + reg = <0x0 0x13010000 0x0 0x10000>, + <0x0 0x21000000 0x0 0x400000>; + interrupts = <25>; + clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>, + <&syscrg JH7110_SYSCLK_QSPI_AHB>, + <&syscrg JH7110_SYSCLK_QSPI_APB>; + clock-names = "ref", "ahb", "apb"; resets = <&syscrg JH7110_SYSRST_QSPI_APB>, <&syscrg JH7110_SYSRST_QSPI_AHB>, <&syscrg JH7110_SYSRST_QSPI_REF>; - reset-names = "rst_apb", "rst_ahb", "rst_ref"; + reset-names = "qspi", "qspi-ocp", "rstc_ref"; cdns,fifo-depth = <256>; cdns,fifo-width = <4>; - #address-cells = <1>; - #size-cells = <0>; + cdns,trigger-address = <0x0>; + status = "disabled"; }; syscrg: clock-controller@13020000 { -- 2.44.0

3 2

[PATCH v2] board: rockchip: add ArmSoM Sige7 Rk3588 board
by Jianfeng Liu 27 May '24

27 May '24

ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by ArmSoM. There are two variants depending on the DRAM size : 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16GB memory LPDDR4x Mali G610MC4 GPU 2x MIPI CSI 2 multiple lanes connector 64GB/128GB on board eMMC uSD slot 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C 1x HDMI 2.1 output 2x 2.5 Gbps Ethernet port 40-pin IO header including UART, SPI and I2C USB PD over USB Type-C Size: 92mm x 62mm Kernel commit: 81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board) Note that these commits: - e18e5e8188f2 (arm64: dts: rockchip: add USBDP phys on rk3588) - 6fca4edb93d3 (arm64: dts: rockchip: Add rk3588 GPU node) are not synced to u-boot, so I remove usb3 drd nodes and gpu from kernel devicetree. Signed-off-by: Jianfeng Liu <liujianfeng1994(a)gmail.com> --- Changes in v2: - Fix alphabetical order of MAINTAINERS - Use arch/arm/dts/rk3588-armsom-sige7* in board MAINTAINERS - Remove spi flash related config - Move kernel dts to dts/upstream/src/arm64/rockchip/ MAINTAINERS | 1 + arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi | 28 + arch/arm/mach-rockchip/rk3588/Kconfig | 26 + board/armsom/sige7-rk3588/Kconfig | 12 + board/armsom/sige7-rk3588/MAINTAINERS | 7 + configs/sige7-rk3588_defconfig | 93 +++ doc/board/rockchip/rockchip.rst | 1 + .../arm64/rockchip/rk3588-armsom-sige7.dts | 691 ++++++++++++++++++ include/configs/sige7-rk3588.h | 15 + 9 files changed, 874 insertions(+) create mode 100644 arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi create mode 100644 board/armsom/sige7-rk3588/Kconfig create mode 100644 board/armsom/sige7-rk3588/MAINTAINERS create mode 100644 configs/sige7-rk3588_defconfig create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts create mode 100644 include/configs/sige7-rk3588.h diff --git a/MAINTAINERS b/MAINTAINERS index 638b2fdd44..a2c799cb7d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -533,6 +533,7 @@ F: arch/arm/include/asm/arch-rockchip/ F: arch/arm/mach-rockchip/ F: board/amarula/vyasa-rk3288/ F: board/anbernic/rgxx3_rk3566/ +F: board/armsom/sige7-rk3588/ F: board/chipspark/popmetal_rk3288 F: board/engicam/px30_core/ F: board/firefly/ diff --git a/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi new file mode 100644 index 0000000000..2c984d0147 --- /dev/null +++ b/arch/arm/dts/rk3588-armsom-sige7-u-boot.dtsi @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. + */ + +#include "rk3588-u-boot.dtsi" + +&sdhci { + cap-mmc-highspeed; + mmc-hs200-1_8v; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig index 39049ab35a..4c14b0be1e 100644 --- a/arch/arm/mach-rockchip/rk3588/Kconfig +++ b/arch/arm/mach-rockchip/rk3588/Kconfig @@ -152,6 +152,31 @@ config TARGET_ROCK5B_RK3588 USB PD over USB Type-C Size: 100mm x 72mm (Pico-ITX form factor) +config TARGET_SIGE7_RK3588 + bool "ArmSoM Sige7 RK3588 board" + select BOARD_LATE_INIT + help + ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) + by ArmSoM. + + There are two variants depending on the DRAM size : 8G and 16G. + + Specification: + + Rockchip Rk3588 SoC + 4x ARM Cortex-A76, 4x ARM Cortex-A55 + 8/16GB memory LPDDR4x + Mali G610MC4 GPU + 2x MIPI CSI 2 multiple lanes connector + 64GB/128GB on board eMMC + uSD slot + 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C + 1x HDMI 2.1 output + 2x 2.5 Gbps Ethernet port + 40-pin IO header including UART, SPI and I2C + USB PD over USB Type-C + Size: 92mm x 62mm + config TARGET_QUARTZPRO64_RK3588 bool "Pine64 QuartzPro64 RK3588 board" select BOARD_LATE_INIT @@ -221,6 +246,7 @@ config ROCKCHIP_COMMON_STACK_ADDR config TEXT_BASE default 0x00a00000 +source "board/armsom/sige7-rk3588/Kconfig" source "board/edgeble/neural-compute-module-6/Kconfig" source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" source "board/pine64/quartzpro64-rk3588/Kconfig" diff --git a/board/armsom/sige7-rk3588/Kconfig b/board/armsom/sige7-rk3588/Kconfig new file mode 100644 index 0000000000..793985f531 --- /dev/null +++ b/board/armsom/sige7-rk3588/Kconfig @@ -0,0 +1,12 @@ +if TARGET_SIGE7_RK3588 + +config SYS_BOARD + default "sige7-rk3588" + +config SYS_VENDOR + default "armsom" + +config SYS_CONFIG_NAME + default "sige7-rk3588" + +endif diff --git a/board/armsom/sige7-rk3588/MAINTAINERS b/board/armsom/sige7-rk3588/MAINTAINERS new file mode 100644 index 0000000000..0fba39b76c --- /dev/null +++ b/board/armsom/sige7-rk3588/MAINTAINERS @@ -0,0 +1,7 @@ +SIGE7-RK3588 +M: Jianfeng Liu <liujianfeng1994(a)gmail.com> +S: Maintained +F: board/armsom/sige7-rk3588 +F: include/configs/sige7-rk3588.h +F: configs/sige7-rk3588_defconfig +F: arch/arm/dts/rk3588-armsom-sige7* diff --git a/configs/sige7-rk3588_defconfig b/configs/sige7-rk3588_defconfig new file mode 100644 index 0000000000..d15fc09fc8 --- /dev/null +++ b/configs/sige7-rk3588_defconfig @@ -0,0 +1,93 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-armsom-sige7" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_SIGE7_RK3588=y +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-armsom-sige7.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_PHYLIB=y +CONFIG_RTL8169=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_SPL_USB_DWC3_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_LAN75XX=y +CONFIG_USB_ETHER_LAN78XX=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=y diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 9a726e9cde..6b826b3288 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -118,6 +118,7 @@ List of mainline supported Rockchip boards: - Radxa ROCK 3 Model A (rock-3a-rk3568) * rk3588 + - ArmSoM Sige7 (sige7-rk3588) - Rockchip EVB (evb-rk3588) - Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588) - Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588) diff --git a/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts b/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts new file mode 100644 index 0000000000..c7b46536ec --- /dev/null +++ b/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts @@ -0,0 +1,691 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "rk3588.dtsi" + +/ { + model = "ArmSoM Sige7"; + compatible = "armsom,sige7", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_rgb_g>; + + led_green: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led_red: led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +/* phy1 - right ethernet port */ +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy2 - WiFi */ +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* phy0 - left ethernet port */ +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_rgb_g: led-rgb-g { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led_rgb_r: led-rgb-r { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs200-1_8v; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <200000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/include/configs/sige7-rk3588.h b/include/configs/sige7-rk3588.h new file mode 100644 index 0000000000..fd08da568b --- /dev/null +++ b/include/configs/sige7-rk3588.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2024 ArmSoM Technology Co., Ltd. + */ + +#ifndef __SIGE7_RK3588_H +#define __SIGE7_RK3588_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3588_common.h> + +#endif /* __SIGE7_RK3588_H */ -- 2.34.1

5 6