April 2024 - U-Boot

rk3399 issue: no DMA in Linux with mainline TF-A and U-Boot SPL
by Christoph Fritz 24 Apr '24

24 Apr '24

Hello Kever, on a rk3399, booting current U-Boot SPL with mainline TF-A leads to missing DMA (and no sound) on Linux. However, when using rockchip its so called mini-loader (rk3399_miniloader_v1.26.bin) and their BL31 (rk3399_bl31_v1.35.elf) to boot, DMA works perfectly fine. Tested on a custom rk3399 board and on ROCK Pi4. Attached to this mail are two boot logs with some debug prints: - good_amba_log.txt (DMA works) - no_amba_log.txt (no DMA device) The main difference I can spot between the two logs is that on Linux (drivers/amba/bus.c) AMBA_CID (0xb105f00d) cannot be found. Instead, only some CORESIGHT_CIDs (presumably for debugging) and four 0x00000000 CIDs are detected. As a result, the "PL330 DMAC-241330" driver does not load. My theory is that DMA needs to be allowed somewhere in the undocumented syscon- registers, similar to what U-Boot is already doing for eMMC in arch_cpu_init() (arch/arm/mach-rockchip/rk3399/rk3399.c). Any ideas? Or maybe I'm just missing some configuration? Since multiple software projects are involved (TF-A, OP-TEE, U-Boot, Linux), I Cc'ed a bit. Thanks -- Christoph

4 6

[PATCH v2 0/1] arch: zynqmp: Make zynqmp command more accessible.
by Charlie Johnston 24 Apr '24

24 Apr '24

While working on a third-party board using a ZynqMP, I was unable to use the zynqmp command even with the proper config definitions. While that command appears tied to the architecture, it was being included based on the board selection instead. This patch series moves the command to be accessible to any ZynqMP arch based board. Changes since v1: - Squash into a single commit - Command is now moved into arch tree instead of cmd tree

2 2

[PATCH] xilinx: zynqmp: Clean up xilinx_zynqmp.h
by Michal Simek 24 Apr '24

24 Apr '24

Options are moving to Kconfig by running sed and comments are staying in that's why do clean up and remove useless comments. Signed-off-by: Michal Simek <michal.simek(a)amd.com> --- include/configs/xilinx_zynqmp.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 5bc117e19000..c5cbb76645ef 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -42,8 +42,6 @@ # define PARTS_DEFAULT #endif -/* Console I/O Buffer Size */ - /* Ethernet driver */ #if defined(CONFIG_ZYNQ_GEM) # define PHY_ANEG_TIMEOUT 20000 @@ -204,10 +202,6 @@ # define CFG_SYS_SPI_ARGS_SIZE 0xa0000 #endif -/* u-boot is like dtb */ - -/* ATF is my kernel image */ - #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used" #endif -- 2.44.0

1 2

EFI payload in 64 bit mode?
by Philip Oberfichtner 24 Apr '24

24 Apr '24

Hi, I'm wondering if it is currently possible to have U-Boot run in 64-bit mode as EFI payload. TARGET_EFI_APP64 selects X86_64 to achieve this. TARGET_EFI_PAYLOAD does currently always switch 32-bit mode. Any hints what would have to be done to get it to run in 64-bit mode? Thanks in advance, Philip -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-22 Fax: +49-8142-66989-80 Email: pro(a)denx.de =====================================================================

2 1

[PATCH 1/3] efi_loader: enable QueryVariableInfo at runtime for file backed variables
by Ilias Apalodimas 24 Apr '24

24 Apr '24

Since commit c28d32f946f0 ("efi_loader: conditionally enable SetvariableRT") we are enabling the last bits of missing runtime services. Add support for QueryVariableInfo which we already support at boottime and we just need to mark some fucntions available at runtime and move some checks around. It's worth noting that pointer checks for maxmimum and remaining variable storage aren't when we store variables on the RPMB, since the Secure World backend is already performing them. Signed-off-by: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> --- lib/efi_loader/efi_runtime.c | 4 ++++ lib/efi_loader/efi_var_common.c | 6 ------ lib/efi_loader/efi_variable.c | 18 ++++++++++++------ lib/efi_loader/efi_variable_tee.c | 5 +++++ .../efi_selftest_variables_runtime.c | 14 +++++++++++--- 5 files changed, 32 insertions(+), 15 deletions(-) diff --git a/lib/efi_loader/efi_runtime.c b/lib/efi_loader/efi_runtime.c index 73831c527e00..011bcd04836d 100644 --- a/lib/efi_loader/efi_runtime.c +++ b/lib/efi_loader/efi_runtime.c @@ -129,6 +129,10 @@ efi_status_t efi_init_runtime_supported(void) EFI_RT_SUPPORTED_SET_VIRTUAL_ADDRESS_MAP | EFI_RT_SUPPORTED_CONVERT_POINTER; + if (IS_ENABLED(CONFIG_EFI_VARIABLE_FILE_STORE)) + rt_table->runtime_services_supported |= + EFI_RT_SUPPORTED_QUERY_VARIABLE_INFO; + if (IS_ENABLED(CONFIG_EFI_RT_VOLATILE_STORE)) { u8 s = 0; diff --git a/lib/efi_loader/efi_var_common.c b/lib/efi_loader/efi_var_common.c index 961139f005af..ea8d2a4cf98c 100644 --- a/lib/efi_loader/efi_var_common.c +++ b/lib/efi_loader/efi_var_common.c @@ -1,4 +1,3 @@ -// SPDX-License-Identifier: GPL-2.0+ /* * UEFI runtime variable services * @@ -163,11 +162,6 @@ efi_status_t EFIAPI efi_query_variable_info( EFI_ENTRY("%x %p %p %p", attributes, maximum_variable_storage_size, remaining_variable_storage_size, maximum_variable_size); - if (!maximum_variable_storage_size || - !remaining_variable_storage_size || - !maximum_variable_size) - return EFI_EXIT(EFI_INVALID_PARAMETER); - ret = efi_query_variable_info_int(attributes, maximum_variable_storage_size, remaining_variable_storage_size, diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c index 0cbed53d1dbf..e039cecd82b6 100644 --- a/lib/efi_loader/efi_variable.c +++ b/lib/efi_loader/efi_variable.c @@ -406,12 +406,15 @@ efi_status_t efi_set_variable_int(const u16 *variable_name, return EFI_SUCCESS; } -efi_status_t efi_query_variable_info_int(u32 attributes, - u64 *maximum_variable_storage_size, - u64 *remaining_variable_storage_size, - u64 *maximum_variable_size) +efi_status_t __efi_runtime +efi_query_variable_info_int(u32 attributes, + u64 *maximum_variable_storage_size, + u64 *remaining_variable_storage_size, + u64 *maximum_variable_size) { - if (attributes == 0) + if (!maximum_variable_storage_size || + !remaining_variable_storage_size || + !maximum_variable_size || !attributes) return EFI_INVALID_PARAMETER; /* EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS is deprecated */ @@ -460,7 +463,10 @@ static efi_status_t __efi_runtime EFIAPI efi_query_variable_info_runtime( u64 *remaining_variable_storage_size, u64 *maximum_variable_size) { - return EFI_UNSUPPORTED; + return efi_query_variable_info_int(attributes, + maximum_variable_storage_size, + remaining_variable_storage_size, + maximum_variable_size); } /** diff --git a/lib/efi_loader/efi_variable_tee.c b/lib/efi_loader/efi_variable_tee.c index 4f1aa298da13..8b6b0a390869 100644 --- a/lib/efi_loader/efi_variable_tee.c +++ b/lib/efi_loader/efi_variable_tee.c @@ -873,6 +873,11 @@ efi_status_t efi_query_variable_info_int(u32 attributes, efi_status_t ret; u8 *comm_buf; + if (!max_variable_storage_size || + !remain_variable_storage_size || + !max_variable_size || !attributes) + return EFI_INVALID_PARAMETER; + payload_size = sizeof(*mm_query_info); comm_buf = setup_mm_hdr((void **)&mm_query_info, payload_size, SMM_VARIABLE_FUNCTION_QUERY_VARIABLE_INFO, diff --git a/lib/efi_selftest/efi_selftest_variables_runtime.c b/lib/efi_selftest/efi_selftest_variables_runtime.c index afa91be62c85..5794a7b2d405 100644 --- a/lib/efi_selftest/efi_selftest_variables_runtime.c +++ b/lib/efi_selftest/efi_selftest_variables_runtime.c @@ -60,9 +60,17 @@ static int execute(void) ret = runtime->query_variable_info(EFI_VARIABLE_BOOTSERVICE_ACCESS, &max_storage, &rem_storage, &max_size); - if (ret != EFI_UNSUPPORTED) { - efi_st_error("QueryVariableInfo failed\n"); - return EFI_ST_FAILURE; + + if (IS_ENABLED(CONFIG_EFI_VARIABLE_FILE_STORE)) { + if (ret != EFI_SUCCESS) { + efi_st_error("QueryVariableInfo failed\n"); + return EFI_ST_FAILURE; + } + } else { + if (ret != EFI_UNSUPPORTED) { + efi_st_error("QueryVariableInfo failed\n"); + return EFI_ST_FAILURE; + } } ret = runtime->set_variable(u"efi_st_var0", &guid_vendor0, -- 2.40.1

2 4

[GIT PULL] please pull fsl-qoriq-2024-4-24
by Peng Fan 24 Apr '24

24 Apr '24

Hi Tom, Please pull fsl-qoriq-2024-4-24 ----------------------------------------------- move to OF_UPSTREAM for sl28 ----------------------------------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq/-/pipelines/20501 Thanks, Peng. The following changes since commit 38ea74d6d5c05224acdb03f799897c1bdd56f8cc: Prepare v2024.07-rc1 (2024-04-22 15:10:21 -0600) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git tags/fsl-qoriq-2024-4-24 for you to fetch changes up to 61ff13283c3b3858989c038a5dc57b1370e5d8ce: board: sl28: move to OF_UPSTREAM (2024-04-24 00:22:09 +0800) ---------------------------------------------------------------- Michael Walle (1): board: sl28: move to OF_UPSTREAM arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts | 59 ------------ arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts | 65 ------------- arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts | 15 --- arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts | 47 --------- arch/arm/dts/fsl-ls1028a-kontron-sl28.dts | 308 ----------------------------------------------------------- board/kontron/sl28/spl.c | 11 +-- configs/kontron_sl28_defconfig | 5 +- 7 files changed, 8 insertions(+), 502 deletions(-) delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28.dts

2 1

[PATCH 0/4] sunxi: devicetree updates plus new boards
by Andre Przywara 24 Apr '24

24 Apr '24

This updates the Allwinner related devicetree files from the Linux kernel repository. The files were taken from Linux v6.9-rc4, and adjusted to increase compatibility with older kernels. This also adds board support for two new devices: the old Remix Mini PC, a TV box like "Android desktop" device from 2015, and the Tanix TX1, which is a tiny TV box with an H313 SoC. The DT for the latter is preliminary for now, as it hasn't been merged into Linus' tree yet - though that's supposed to happen in about a few weeks time. Please have a look! Cheers, Andre Andre Przywara (4): sunxi: dts: arm/arm64: update devicetree files from Linux-v6.9-rc4 sunxi: a64: Add Remix Mini PC support [DO NOT MERGE] sunxi: dts: arm64: add Tanix TX1 DT from Linux sunxi: H616: add Tanix TX1 support arch/arm/dts/Makefile | 4 +- arch/arm/dts/sun50i-h313-tanix-tx1.dts | 183 +++++++++ arch/arm/dts/sun50i-h6-beelink-gs1.dts | 2 + arch/arm/dts/sun50i-h6-tanix.dtsi | 2 + arch/arm/dts/sun50i-h6.dtsi | 7 +- .../dts/sun50i-h616-bigtreetech-cb1-manta.dts | 2 +- arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi | 4 +- arch/arm/dts/sun50i-h616-bigtreetech-pi.dts | 2 +- arch/arm/dts/sun50i-h616.dtsi | 155 ++++++++ .../arm/dts/sun50i-h618-longan-module-3h.dtsi | 75 ++++ arch/arm/dts/sun50i-h618-longanpi-3h.dts | 144 +++++++ .../arm/dts/sun50i-h618-transpeed-8k618-t.dts | 23 ++ arch/arm/dts/sun50i-h64-remix-mini-pc.dts | 356 ++++++++++++++++++ arch/arm/dts/sun8i-r40-feta40i.dtsi | 7 + configs/remix-mini-pc_defconfig | 14 + configs/tanix_tx1_defconfig | 25 ++ 16 files changed, 996 insertions(+), 9 deletions(-) create mode 100644 arch/arm/dts/sun50i-h313-tanix-tx1.dts create mode 100644 arch/arm/dts/sun50i-h618-longan-module-3h.dtsi create mode 100644 arch/arm/dts/sun50i-h618-longanpi-3h.dts create mode 100644 arch/arm/dts/sun50i-h64-remix-mini-pc.dts create mode 100644 configs/remix-mini-pc_defconfig create mode 100644 configs/tanix_tx1_defconfig -- 2.35.8

1 4

[PULL] Please pull qcom/qcom-main
by Caleb Connolly 23 Apr '24

23 Apr '24

Overshot the -rc1 deadline, but I hope these can still make in for 2024.07. Support is added for 5 new Qualcomm SoCs: * QCM2290 and SM6115 are low and mid range SoCs used on the RB1 and RB2 respectively. SM6115 is also used in some mid-range smartphones/tablets. Initial support includes buttons and USB (host and gadget). * SM8250 is a flagship SoC from 2020 used on the RB5, as well as many flagship smartphones. The board can boot to a U-Boot prompt, but is missing regulators necessary for USB support. * SM8550, and SM8650 are flagship mobile SoCs from 2023 and 2024 respectively. Found on many high end smartphones. In addition: * Support is added for the Schneider HMIBSC board. * mach-snapdragon switches to OF_UPSTREAM * IPQ40xx gets several regressions fixed and some overall cleanup. * The MSM serial driver gains the ability to generate the bit-clock automatically, no longer relying on a custom DT property. * The Qualcomm SMMU driver gets a generic compatible (so per-SoC compatibles don't need to be added). * Support for the GENI I2C controller is added. * The qcom SPMI driver has SPMI v5 support fixed, and v7 support added. * The qcom sdhci driver gets some fixes for SDCC v5 support. * SDM845 gains sdcard support * Support is added for the Synopsys eUSB2 PHY driver (used on SM8550 and SM8650) * SYS_INIT_SP_BSS_OFFSET is set to 1.5M to give us more space for FDTs. * RB2 gets a work-around to fix the USB dr_mode property before booting Linux. --- The following changes since commit 38ea74d6d5c05224acdb03f799897c1bdd56f8cc: Prepare v2024.07-rc1 (2024-04-22 15:10:21 -0600) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-snapdragon.git qcom-main for you to fetch changes up to ad12acd7a8f5aeea5816d5c2fc37c205c403eee0: configs: qcom_defconfig: enable GENI I2C Driver (2024-04-23 13:29:32 +0200) ---------------------------------------------------------------- Caleb Connolly (32): pinctrl: qcom: add qcm2290 pinctrl driver pinctrl: qcom: add sm6115 pinctrl driver pinctrl: qcom: add sm8250 pinctrl driver qcom_defconfig: enable pinctrl for new qcm2290/sm6115/sm8250 clk/qcom: add driver for qcm2290 GCC clk/qcom: add driver for sm6115 GCC clk/qcom: add driver for sm8250 GCC qcom_defconfig: enable clocks for qcm2290/sm6115/sm8250 mmc: msm_sdhci: correct vendor_spec_cap0 register for v5 mmc: msm_sdhci: use modern DT handling mmc: msm_sdhci: print core version mmc: msm_sdhci: use a more sensible default clock rate clk/qcom: sdm845: enable SDCC2 core clock pinctrl: qcom: sdm845: add special pin names dts: sdm845-db845c-u-boot: adjust MMC clocks MAINTAINERS: add Qualcomm mailing list mmc: msm_sdhci: fix vendor_spec_cap0 registers clk/qcom: apq8016: return valid rate when setting UART clock clk/qcom: ipq4019: return valid rate when setting UART clock serial: msm: calculate bit clock divider mach-snapdragon: use OF_UPSTREAM arm: dts: drop qcom dts files qcom_defconfig: set SYS_INIT_SP_BSS_OFFSET gpio: qcom_pmic: add pm6125 gpio: qcom_pmic: add pm8150l iommu: qcom-smmu: add qcom generic compatible phy: qcom: snps-femto-v2: drop clocks arm: dts: qrb4210-rb2-u-boot: add u-boot fixups mach-snapdragon: implement ft_board_setup() for USB role selection qcom_defconfig: enable OF_BOARD_SETUP qcom_defconfig: define safe default SYS_LOAD_ADDR qcom_defconfig: generate SMBIOS tables Neil Armstrong (17): phy: qcom: add Synopsys eUSB2 PHY driver qcom_defconfig: enable the Qualcomm Synopsys eUSB2 PHY driver pinctrl: qcom: Add SM8550 pinctrl driver pinctrl: qcom: Add SM8650 pinctrl driver qcom_defconfig: enable SM8550 & SM8650 pinctrl driver gpio: qcom_pmic_gpio: add support for pm8550-gpio button: qcom-pmic: move node name checks to btn_data struct button: qcom-pmic: add support for pmk8350 button configs clk: qcom: Add SM8550 clock driver clk: qcom: Add SM8650 clock driver qcom_defconfig: enable SM8550 & SM8650 clock driver spmi: msm: fix version 5 support spmi: msm: properly format command spmi: msm: handle peripheral ownership spmi: msm: support controller version 7 i2c: Add support for Qualcomm Generic Interface (GENI) I2C controller configs: qcom_defconfig: enable GENI I2C Driver Robert Marko (8): serial: allow selecting MSM debug UART with ARCH_IPQ40XX serial: msm_serial: remove .clk_rate from debug UART arm: mach-ipq40xx: dont select SMEM by default pinctrl: qcom: allow selecting with ARCH_IPQ40XX mach-ipq40xx: import GPIO header from mach-snapgradon pinctrl: qcom: ipq4019: adapt pin name lookup to upstream DTS pinctrl: qcom: ipq4019: enable DM_FLAG_PRE_RELOC pinctrl: qcom: ipq4019: support all pin functions Sumit Garg (8): mach-snapdragon: Allow other board vendors apart from Qcom qcom: Don't enable LINUX_KERNEL_IMAGE_HEADER by default apq8016: Add support for UART1 clocks and pinmux serial_msm: Enable RS232 flow control pinctrl: qcom: Add support for driving GPIO pins output pinctrl: qcom: apq8016: Add GPIO pinctrl function arm: dts: qcom: Add Schneider HMIBSC board dts board: add support for Schneider HMIBSC board MAINTAINERS | 6 +- arch/arm/Kconfig | 5 +- arch/arm/dts/Makefile | 6 - ...pq8016-sbc.dts => apq8016-schneider-hmibsc.dts} | 706 +-- arch/arm/dts/apq8096-db820c.dts | 1137 ---- arch/arm/dts/msm8916-pm8916.dtsi | 157 - arch/arm/dts/msm8916.dtsi | 2702 --------- arch/arm/dts/msm8996.dtsi | 3884 ------------- arch/arm/dts/pm8916.dtsi | 178 - arch/arm/dts/pm8994.dtsi | 152 - arch/arm/dts/pm8998.dtsi | 130 - arch/arm/dts/pmi8994.dtsi | 65 - arch/arm/dts/pmi8998.dtsi | 98 - arch/arm/dts/pms405.dtsi | 149 - arch/arm/dts/qcs404-evb-4000.dts | 96 - arch/arm/dts/qcs404-evb.dtsi | 389 -- arch/arm/dts/qcs404.dtsi | 1829 ------- arch/arm/dts/qrb4210-rb2-u-boot.dtsi | 6 + arch/arm/dts/sdm845-db845c-u-boot.dtsi | 7 + arch/arm/dts/sdm845-db845c.dts | 1190 ---- arch/arm/dts/sdm845-samsung-starqltechn.dts | 460 -- arch/arm/dts/sdm845-wcd9340.dtsi | 86 - arch/arm/dts/sdm845.dtsi | 5752 -------------------- arch/arm/mach-ipq40xx/include/mach/gpio.h | 37 +- arch/arm/mach-snapdragon/Kconfig | 14 +- arch/arm/mach-snapdragon/of_fixup.c | 20 + board/schneider/hmibsc/MAINTAINERS | 6 + board/schneider/hmibsc/hmibsc.env | 40 + configs/dragonboard410c_defconfig | 2 +- configs/dragonboard820c_defconfig | 2 +- configs/hmibsc_defconfig | 87 + configs/qcom_defconfig | 20 +- doc/board/index.rst | 1 + doc/board/schneider/hmibsc.rst | 45 + doc/board/schneider/index.rst | 9 + doc/device-tree-bindings/serial/msm-serial.txt | 10 - drivers/button/button-qcom-pmic.c | 99 +- drivers/clk/qcom/Kconfig | 39 + drivers/clk/qcom/Makefile | 5 + drivers/clk/qcom/clock-apq8016.c | 39 +- drivers/clk/qcom/clock-ipq4019.c | 2 +- drivers/clk/qcom/clock-qcm2290.c | 192 + drivers/clk/qcom/clock-qcom.h | 5 + drivers/clk/qcom/clock-sdm845.c | 17 + drivers/clk/qcom/clock-sm6115.c | 199 + drivers/clk/qcom/clock-sm8250.c | 282 + drivers/clk/qcom/clock-sm8550.c | 335 ++ drivers/clk/qcom/clock-sm8650.c | 332 ++ drivers/gpio/qcom_pmic_gpio.c | 20 +- drivers/i2c/Kconfig | 10 + drivers/i2c/Makefile | 1 + drivers/i2c/geni_i2c.c | 575 ++ drivers/iommu/qcom-hyp-smmu.c | 1 + drivers/mmc/msm_sdhci.c | 43 +- drivers/phy/qcom/Kconfig | 8 + drivers/phy/qcom/Makefile | 1 + drivers/phy/qcom/phy-qcom-snps-eusb2.c | 366 ++ drivers/phy/qcom/phy-qcom-snps-femto-v2.c | 14 - drivers/pinctrl/qcom/Kconfig | 36 +- drivers/pinctrl/qcom/Makefile | 5 + drivers/pinctrl/qcom/pinctrl-apq8016.c | 2 + drivers/pinctrl/qcom/pinctrl-ipq4019.c | 311 +- drivers/pinctrl/qcom/pinctrl-qcm2290.c | 70 + drivers/pinctrl/qcom/pinctrl-qcom.c | 25 +- drivers/pinctrl/qcom/pinctrl-sdm845.c | 13 +- drivers/pinctrl/qcom/pinctrl-sm6115.c | 200 + drivers/pinctrl/qcom/pinctrl-sm8250.c | 99 + drivers/pinctrl/qcom/pinctrl-sm8550.c | 75 + drivers/pinctrl/qcom/pinctrl-sm8650.c | 75 + drivers/serial/Kconfig | 2 +- drivers/serial/serial_msm.c | 109 +- drivers/spmi/spmi-msm.c | 152 +- include/configs/hmibsc.h | 16 + include/soc/qcom/geni-se.h | 265 + 74 files changed, 4405 insertions(+), 19118 deletions(-) rename arch/arm/dts/{apq8016-sbc.dts => apq8016-schneider-hmibsc.dts} (50%) delete mode 100644 arch/arm/dts/apq8096-db820c.dts delete mode 100644 arch/arm/dts/msm8916-pm8916.dtsi delete mode 100644 arch/arm/dts/msm8916.dtsi delete mode 100644 arch/arm/dts/msm8996.dtsi delete mode 100644 arch/arm/dts/pm8916.dtsi delete mode 100644 arch/arm/dts/pm8994.dtsi delete mode 100644 arch/arm/dts/pm8998.dtsi delete mode 100644 arch/arm/dts/pmi8994.dtsi delete mode 100644 arch/arm/dts/pmi8998.dtsi delete mode 100644 arch/arm/dts/pms405.dtsi delete mode 100644 arch/arm/dts/qcs404-evb-4000.dts delete mode 100644 arch/arm/dts/qcs404-evb.dtsi delete mode 100644 arch/arm/dts/qcs404.dtsi create mode 100644 arch/arm/dts/qrb4210-rb2-u-boot.dtsi delete mode 100644 arch/arm/dts/sdm845-db845c.dts delete mode 100644 arch/arm/dts/sdm845-samsung-starqltechn.dts delete mode 100644 arch/arm/dts/sdm845-wcd9340.dtsi delete mode 100644 arch/arm/dts/sdm845.dtsi create mode 100644 board/schneider/hmibsc/MAINTAINERS create mode 100644 board/schneider/hmibsc/hmibsc.env create mode 100644 configs/hmibsc_defconfig create mode 100644 doc/board/schneider/hmibsc.rst create mode 100644 doc/board/schneider/index.rst delete mode 100644 doc/device-tree-bindings/serial/msm-serial.txt create mode 100644 drivers/clk/qcom/clock-qcm2290.c create mode 100644 drivers/clk/qcom/clock-sm6115.c create mode 100644 drivers/clk/qcom/clock-sm8250.c create mode 100644 drivers/clk/qcom/clock-sm8550.c create mode 100644 drivers/clk/qcom/clock-sm8650.c create mode 100644 drivers/i2c/geni_i2c.c create mode 100644 drivers/phy/qcom/phy-qcom-snps-eusb2.c create mode 100644 drivers/pinctrl/qcom/pinctrl-qcm2290.c create mode 100644 drivers/pinctrl/qcom/pinctrl-sm6115.c create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250.c create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8550.c create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8650.c create mode 100644 include/configs/hmibsc.h create mode 100644 include/soc/qcom/geni-se.h

2 1

[PATCH] cmd: gpt: initialize partition table
by Kishan Dudhatra 23 Apr '24

23 Apr '24

If partition init is not completed within the gpt write, the gpt partition list will not be updated. Signed-off-by: Kishan Dudhatra <kishan.dudhatra(a)siliconsignals.io> diff --git a/cmd/gpt.c b/cmd/gpt.c index d7e96529a6..2d652f480a 100644 --- a/cmd/gpt.c +++ b/cmd/gpt.c @@ -643,6 +643,10 @@ static int gpt_default(struct blk_desc *blk_dev_desc, const char *str_part) free(str_disk_guid); free(partitions); + /* initialize partition table */ + if ((blk_dev_desc)->uclass_id == UCLASS_MMC) + part_init(blk_dev_desc); + return ret; } -- 2.34.1

2 2

RISC-V u-boot unable to boot QEMU using '-cpu max'
by Daniel Henrique Barboza 23 Apr '24

23 Apr '24

Hi, In QEMU we have a 'max' type CPU that implements (almost) all extensions that QEMU is able to emulate. Recently, in QEMU commit 249e0905d05, we bumped the extensions for this CPU. And after this commit this CPU is now unable to boot a guest using upstream u-boot. Here's the error being thrown: qemu-system-riscv64 \ -machine virt -nographic -m 8G -smp 8 \ -cpu max -kernel uboot.elf (...) (...) initcall sequence 000000008027c3e8 failed at call 000000008021259e (err=-28) ### ERROR ### Please RESET the board ### I can get the guest to boot if I disable the following extensions from the 'max' CPU: -cpu max,zfbfmin=false,zvfbfmin=false,zvfbfwma=false Due to QEMU extension dependencies I'm not able to disable these individually. What I can say is that u-boot isn't playing ball to at least one of them. Is this an u-boot bug? Up to this point I was assuming that u-boot would silently ignore hart extensions that it doesn't support. Thanks, Daniel

4 4