February 2024 - U-Boot

[PATCH 0/5] Qualcomm DWC3 USB support
by Caleb Connolly 21 Mar '24

21 Mar '24

This series enables support for Qualcomm platforms in the DWC3 driver, adds support for arbitrary sector sizes to the USB mass storage gadget, and fixes an issue with the CDC ACM driver where it wouldn't initialise the USB device. Additionally, it fixes a syntax bug in the Qualcomm SMMU driver, and makes USB_DWC3_GADGET select DM_USB_GADGET to fix compilation with gadget mode. This is part of a larger series enabling DWC3 USB support on Qualcomm platforms, a feature branch with all patches can be found at [1]. [1]: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/tree/b4/dwc3-q… --- Caleb Connolly (5): usb: dwc3-generic: implement Qualcomm wrapper usb: dwc3: select DM_USB_GADGET usb: gadget: CDC ACM: call usb_gadget_initialize usb: gadget: UMS: support multiple sector sizes iommu: qcom-smmu: fix debugging cmd/usb_mass_storage.c | 4 -- drivers/iommu/qcom-hyp-smmu.c | 2 +- drivers/usb/dwc3/Kconfig | 1 + drivers/usb/dwc3/dwc3-generic.c | 99 ++++++++++++++++++++++++++++++++++- drivers/usb/gadget/f_acm.c | 9 ++++ drivers/usb/gadget/f_mass_storage.c | 101 ++++++++++++++++++++---------------- drivers/usb/gadget/storage_common.c | 12 +++-- include/usb_mass_storage.h | 1 - 8 files changed, 174 insertions(+), 55 deletions(-) --- base-commit: 16d331e8f1581de1ac6283365774a57dc1403cbd // Caleb (they/them)

3 18

[PATCH v6] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc
by MD Danish Anwar 21 Mar '24

21 Mar '24

Add APIs to set a firmware_name to a rproc and boot the rproc with the same firmware. Clients can call rproc_set_firmware() API to set firmware_name for a rproc whereas rproc_boot() will load the firmware set by rproc_set_firmware() to a buffer by calling request_firmware_into_buf(). rproc_boot() will then load the firmware file to the remote processor and start the remote processor. Also include "fs-loader.h" and make remoteproc driver select FS_LOADER in Kconfig so that we can call request_firmware_into_buf() from remoteproc driver. Signed-off-by: MD Danish Anwar <danishanwar(a)ti.com> Acked-by: Ravi Gunasekaran <r-gunasekaran(a)ti.com> --- Changes from v5 to v6: *) Collected Acked-by tag from Ravi Gunasekaran <r-gunasekaran(a)ti.com> *) Fixed few typos as pointed out by Roger Quadros <rogerq(a)kernel.org> *) Added if condition to check if uc_pdata->fw_name exists and free it before the strndup as suggested by Roger Quadros <rogerq(a)kernel.org> Changes from v4 to v5: *) Added Kconfig option REMOTEPROC_MAX_FW_SIZE to set max firmware size that can be loaded to a rproc. *) Added freeing of address in rproc_boot() as pointed out by Ravi. *) Allocating the address at a later point in rproc_boot() *) Rebased on latest u-boot/master [commit 9e00b6993f724da9699ef12573307afea8c19284] Changes from v3 to v4: *) No functional change. Splitted the patch out of the series as suggested by Nishant. *) Droppped the RFC tag. v5: https://lore.kernel.org/all/20240217122602.3402774-1-danishanwar@ti.com/ v4: https://lore.kernel.org/all/20240130063322.2345057-1-danishanwar@ti.com/ v3: https://lore.kernel.org/all/20240124064930.1787929-4-danishanwar@ti.com/ drivers/remoteproc/Kconfig | 8 +++ drivers/remoteproc/rproc-uclass.c | 102 ++++++++++++++++++++++++++++++ include/remoteproc.h | 34 ++++++++++ 3 files changed, 144 insertions(+) diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 781de530af..9f9877931c 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -10,6 +10,7 @@ menu "Remote Processor drivers" # All users should depend on DM config REMOTEPROC bool + select FS_LOADER depends on DM # Please keep the configuration alphabetically sorted. @@ -102,4 +103,11 @@ config REMOTEPROC_TI_IPU help Say 'y' here to add support for TI' K3 remoteproc driver. +config REMOTEPROC_MAX_FW_SIZE + hex "Maximum size of firmware file that needs to be loaded to the remote processor" + default 0x10000 + help + Maximum size of the firmware file (elf, binary) that needs to be + loaded to the remote processor. + endmenu diff --git a/drivers/remoteproc/rproc-uclass.c b/drivers/remoteproc/rproc-uclass.c index 28b362c887..f4f22a3851 100644 --- a/drivers/remoteproc/rproc-uclass.c +++ b/drivers/remoteproc/rproc-uclass.c @@ -13,6 +13,7 @@ #include <log.h> #include <malloc.h> #include <virtio_ring.h> +#include <fs_loader.h> #include <remoteproc.h> #include <asm/io.h> #include <dm/device-internal.h> @@ -961,3 +962,104 @@ unsigned long rproc_parse_resource_table(struct udevice *dev, struct rproc *cfg) return 1; } + +int rproc_set_firmware(struct udevice *rproc_dev, const char *fw_name) +{ + struct dm_rproc_uclass_pdata *uc_pdata; + int len; + char *p; + + if (!rproc_dev || !fw_name) + return -EINVAL; + + uc_pdata = dev_get_uclass_plat(rproc_dev); + if (!uc_pdata) + return -EINVAL; + + len = strcspn(fw_name, "\n"); + if (!len) { + debug("invalid firmware name\n"); + return -EINVAL; + } + + if (uc_pdata->fw_name) + free(uc_pdata->fw_name); + + p = strndup(fw_name, len); + if (!p) + return -ENOMEM; + + uc_pdata->fw_name = p; + + return 0; +} + +int rproc_boot(struct udevice *rproc_dev) +{ + struct dm_rproc_uclass_pdata *uc_pdata; + struct udevice *fs_loader; + int core_id, ret = 0; + char *firmware; + void *addr; + + if (!rproc_dev) + return -EINVAL; + + uc_pdata = dev_get_uclass_plat(rproc_dev); + if (!uc_pdata) + return -EINVAL; + + core_id = dev_seq(rproc_dev); + firmware = uc_pdata->fw_name; + if (!firmware) { + debug("No firmware name set for rproc core %d\n", core_id); + return -EINVAL; + } + + /* Initialize all rproc cores */ + if (!rproc_is_initialized()) { + ret = rproc_init(); + if (ret) { + debug("rproc_init() failed: %d\n", ret); + return ret; + } + } + + /* Loading firmware to a given address */ + ret = get_fs_loader(&fs_loader); + if (ret) { + debug("could not get fs loader: %d\n", ret); + return ret; + } + + if (CONFIG_REMOTEPROC_MAX_FW_SIZE) { + addr = malloc(CONFIG_REMOTEPROC_MAX_FW_SIZE); + if (!addr) + return -ENOMEM; + } else { + debug("CONFIG_REMOTEPROC_MAX_FW_SIZE not defined\n"); + return -EINVAL; + } + + ret = request_firmware_into_buf(fs_loader, firmware, addr, CONFIG_REMOTEPROC_MAX_FW_SIZE, + 0); + if (ret < 0) { + debug("could not request %s: %d\n", firmware, ret); + goto free_buffer; + } + + ret = rproc_load(core_id, (ulong)addr, ret); + if (ret) { + debug("failed to load %s to rproc core %d from addr 0x%08lX err %d\n", + uc_pdata->fw_name, core_id, (ulong)addr, ret); + goto free_buffer; + } + + ret = rproc_start(core_id); + if (ret) + debug("failed to start rproc core %d\n", core_id); + +free_buffer: + free(addr); + return ret; +} diff --git a/include/remoteproc.h b/include/remoteproc.h index 91a88791a4..6f8068e149 100644 --- a/include/remoteproc.h +++ b/include/remoteproc.h @@ -403,6 +403,7 @@ enum rproc_mem_type { * @name: Platform-specific way of naming the Remote proc * @mem_type: one of 'enum rproc_mem_type' * @driver_plat_data: driver specific platform data that may be needed. + * @fw_name: firmware name * * This can be accessed with dev_get_uclass_plat() for any UCLASS_REMOTEPROC * device. @@ -412,6 +413,7 @@ struct dm_rproc_uclass_pdata { const char *name; enum rproc_mem_type mem_type; void *driver_plat_data; + char *fw_name; }; /** @@ -705,6 +707,34 @@ unsigned long rproc_parse_resource_table(struct udevice *dev, struct resource_table *rproc_find_resource_table(struct udevice *dev, unsigned int addr, int *tablesz); +/** + * rproc_set_firmware() - assign a new firmware name + * @rproc_dev: device for which new firmware name is being assigned + * @fw_name: new firmware name to be assigned + * + * This function allows remoteproc drivers or clients to configure a custom + * firmware name. The function does not trigger a remote processor boot, + * only sets the firmware name used for a subsequent boot. + * + * This function sets the fw_name field in uclass pdata of the Remote proc + * + * Return: 0 on success or a negative value upon failure + */ +int rproc_set_firmware(struct udevice *rproc_dev, const char *fw_name); + +/** + * rproc_boot() - boot a remote processor + * @rproc_dev: rproc device to boot + * + * Boot a remote processor (i.e. load its firmware, power it on, ...). + * + * This function first loads the firmware set in the uclass pdata of Remote + * processor to a buffer and then loads firmware to the remote processor + * using rproc_load(). + * + * Return: 0 on success, and an appropriate error value otherwise + */ +int rproc_boot(struct udevice *rproc_dev); #else static inline int rproc_init(void) { return -ENOSYS; } static inline int rproc_dev_init(int id) { return -ENOSYS; } @@ -744,6 +774,10 @@ static inline int rproc_elf_load_rsc_table(struct udevice *dev, ulong fw_addr, ulong fw_size, ulong *rsc_addr, ulong *rsc_size) { return -ENOSYS; } +static inline int rproc_set_firmware(struct udevice *rproc_dev, const char *fw_name) +{ return -ENOSYS; } +static inline int rproc_boot(struct udevice *rproc_dev) +{ return -ENOSYS; } #endif #endif /* _RPROC_H_ */ -- 2.34.1

4 12

[PATCH] riscv: Repeat virtio scan
by Łukasz Stelmach 19 Mar '24

19 Mar '24

The first time virtio_init() gets called from board_init() PCI isn't ready. Thus any virtio-over-PCI (e.g. network interfaces) devices can't be detected and used without additional `virtio scan` scan in the shell or a script. Signed-off-by: Łukasz Stelmach <l.stelmach(a)samsung.com> --- The patch works for my but: a) maybe virtio_init() should called only from board_init() the same way as on ARM? b) can a repeated virtio_init() break already detected/initialized devices? board/emulation/qemu-riscv/qemu-riscv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/board/emulation/qemu-riscv/qemu-riscv.c b/board/emulation/qemu-riscv/qemu-riscv.c index 181abbbf97d..567b9dc6170 100644 --- a/board/emulation/qemu-riscv/qemu-riscv.c +++ b/board/emulation/qemu-riscv/qemu-riscv.c @@ -46,6 +46,9 @@ int board_late_init(void) if (CONFIG_IS_ENABLED(USB_KEYBOARD)) usb_init(); + /* Repeat virtio scan to detect PCI attached virtio devices. */ + virtio_init(); + return 0; } -- 2.39.2

2 1

[PATCH 0/2] Reduce the complexity of add_map() and count_required_pts()
by Ying-Chun Liu (PaulLiu) 18 Mar '24

18 Mar '24

Reduce the complexity of add_map() and count_required_pts() to gain better performance. Marc Zyngier (2): arm64: Reduce add_map() complexity arm64: Reduce PT size estimation complexity arch/arm/cpu/armv8/cache_v8.c | 201 +++++++++++++--------------------- 1 file changed, 79 insertions(+), 122 deletions(-) -- 2.39.1

6 18

[PATCH 1/3] mmc: Convert hs400_tuning flag from u8 to bool
by Marek Vasut 17 Mar '24

17 Mar '24

This hs400_tuning is a flag, make it bool. No functional change. This will be useful in the following patch, which adds another more generic flag, where the compiler can better use the space now reserved for the u8 to store more flags in it. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Cc: Hai Pham <hai.pham.ud(a)renesas.com> Cc: Jaehoon Chung <jh80.chung(a)samsung.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> Cc: Paul Barker <paul.barker.ct(a)bp.renesas.com> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Sean Anderson <seanga2(a)gmail.com> Cc: Tom Rini <trini(a)konsulko.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> --- drivers/mmc/mmc.c | 4 ++-- include/mmc.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 83f9ae8bb7d..07d87c993a6 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -2027,9 +2027,9 @@ static int mmc_select_hs400(struct mmc *mmc) mmc_set_clock(mmc, mmc->tran_speed, false); /* execute tuning if needed */ - mmc->hs400_tuning = 1; + mmc->hs400_tuning = true; err = mmc_execute_tuning(mmc, MMC_CMD_SEND_TUNING_BLOCK_HS200); - mmc->hs400_tuning = 0; + mmc->hs400_tuning = false; if (err) { debug("tuning failed\n"); return err; diff --git a/include/mmc.h b/include/mmc.h index 2b9a6aa8ee0..92cffc6a19a 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -736,7 +736,7 @@ struct mmc { * accessing the boot partitions */ u32 quirks; - u8 hs400_tuning; + bool hs400_tuning; enum bus_mode user_speed_mode; /* input speed mode from user */ }; -- 2.43.0

3 8

[PATCH 1/1] Dockerfile: install xilinx-bootgen package
by Heinrich Schuchardt 15 Mar '24

15 Mar '24

Bootgen is used in a binman test. The test is skipped without the binary. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- tools/docker/Dockerfile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/docker/Dockerfile b/tools/docker/Dockerfile index 6122776bc6..884b1089e0 100644 --- a/tools/docker/Dockerfile +++ b/tools/docker/Dockerfile @@ -116,6 +116,7 @@ RUN apt-get update && apt-get install -y \ virtualenv \ vboot-kernel-utils \ vboot-utils \ + xilinx-bootgen \ xxd \ zip \ && rm -rf /var/lib/apt/lists/* -- 2.43.0

2 1

[PATCH 1/1] Dockerfile: build fiptool
by Heinrich Schuchardt 15 Mar '24

15 Mar '24

Fiptool is used in a binman test. The test is skipped without the binary. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- tools/docker/Dockerfile | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tools/docker/Dockerfile b/tools/docker/Dockerfile index 884b1089e0..a5df0847d0 100644 --- a/tools/docker/Dockerfile +++ b/tools/docker/Dockerfile @@ -189,6 +189,16 @@ RUN git clone https://gitlab.com/qemu-project/qemu.git /tmp/qemu && \ make -j$(nproc) all install && \ rm -rf /tmp/qemu +# Build fiptool +RUN git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git /tmp/tf-a && \ + cd /tmp/tf-a/ && \ + git checkout v2.10.0 && \ + cd tools/fiptool && \ + make && \ + mkdir -p /usr/local/bin && \ + cp fiptool /usr/local/bin && \ + rm -rf /tmp/tf-a + # Build genimage (required by some targets to generate disk images) RUN wget -O - https://github.com/pengutronix/genimage/releases/download/v14/genimage-14.t… | tar -C /tmp -xJ && \ cd /tmp/genimage-14 && \ -- 2.43.0

2 1

[PATCH v2 0/4] Add initial support for Microchip SAMA7G54 Curiosity board
by Mihai Sain 14 Mar '24

14 Mar '24

This patch series adds initial support for Microchip SAMA7G54 Curiosity board. Changes in v2: -------------- * Update flexcom 10 node in order to match previous flexcom definitions. * Sort in alphabetical order all nodes and pinctrl. * Remove status okay from leds, nand, eeprom, flash. * Add CONFIG_ENV_SIZE=0x4000 in mmc defconfig. * Set CONFIG_ENV_SECT_SIZE=0x10000 in qspiflash defconfig. Mihai Sain (4): ARM: dts: at91: sama7g5: Add flexcom 10 node ARM: dts: at91: sama7g54_curiosity: Add initial device tree of the board board: at91: sama7g54_curiosity: Add initial board support configs: at91: sama7g54_curiosity: Add initial default configs arch/arm/dts/Makefile | 3 + .../dts/at91-sama7g54_curiosity-u-boot.dtsi | 59 +++++ arch/arm/dts/at91-sama7g54_curiosity.dts | 242 ++++++++++++++++++ arch/arm/dts/sama7g5.dtsi | 24 ++ arch/arm/mach-at91/Kconfig | 10 + board/atmel/sama7g54_curiosity/Kconfig | 15 ++ board/atmel/sama7g54_curiosity/MAINTAINERS | 9 + board/atmel/sama7g54_curiosity/Makefile | 7 + .../sama7g54_curiosity/sama7g54_curiosity.c | 36 +++ configs/sama7g54_curiosity_mmc_defconfig | 123 +++++++++ .../sama7g54_curiosity_nandflash_defconfig | 122 +++++++++ .../sama7g54_curiosity_qspiflash_defconfig | 122 +++++++++ include/configs/sama7g54_curiosity.h | 17 ++ 13 files changed, 789 insertions(+) create mode 100644 arch/arm/dts/at91-sama7g54_curiosity-u-boot.dtsi create mode 100644 arch/arm/dts/at91-sama7g54_curiosity.dts create mode 100644 board/atmel/sama7g54_curiosity/Kconfig create mode 100644 board/atmel/sama7g54_curiosity/MAINTAINERS create mode 100644 board/atmel/sama7g54_curiosity/Makefile create mode 100644 board/atmel/sama7g54_curiosity/sama7g54_curiosity.c create mode 100644 configs/sama7g54_curiosity_mmc_defconfig create mode 100644 configs/sama7g54_curiosity_nandflash_defconfig create mode 100644 configs/sama7g54_curiosity_qspiflash_defconfig create mode 100644 include/configs/sama7g54_curiosity.h -- 2.44.0

2 5

[PATCH] rockchip: board: Add minimal generic RK3588S/RK3588 board
by Jonas Karlman 14 Mar '24

14 Mar '24

Add a minimal generic RK3588S/RK3588 board that only have eMMC and SDMMC enabled. This defconfig can be used to boot from eMMC or SD-card on most RK3588S/RK3588 boards that follow reference board design. Also fix the alphabetical order of RK3588 boards listed in Makefile and documentation. Signed-off-by: Jonas Karlman <jonas(a)kwiboo.se> --- This patch depend on the series "rockchip: rk35xx: Sync device tree with linux v6.8-rc1" [1]. [1] https://patchwork.ozlabs.org/cover/1891669/ --- arch/arm/dts/Makefile | 5 +- arch/arm/dts/rk3588-generic-u-boot.dtsi | 3 ++ arch/arm/dts/rk3588-generic.dts | 44 ++++++++++++++++ board/rockchip/evb_rk3588/MAINTAINERS | 7 +++ configs/generic-rk3588_defconfig | 68 +++++++++++++++++++++++++ doc/board/rockchip/rockchip.rst | 3 +- 6 files changed, 127 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/rk3588-generic-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588-generic.dts create mode 100644 configs/generic-rk3588_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0fcae77cefe3..6361bc5abc37 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -193,13 +193,14 @@ dtb-$(CONFIG_ROCKCHIP_RK3588) += \ rk3588-edgeble-neu6a-io.dtb \ rk3588-edgeble-neu6b-io.dtb \ rk3588-evb1-v10.dtb \ + rk3588-generic.dtb \ rk3588-nanopc-t6.dtb \ rk3588s-orangepi-5.dtb \ rk3588-orangepi-5-plus.dtb \ rk3588-quartzpro64.dtb \ - rk3588-turing-rk1.dtb \ rk3588s-rock-5a.dtb \ - rk3588-rock-5b.dtb + rk3588-rock-5b.dtb \ + rk3588-turing-rk1.dtb dtb-$(CONFIG_ROCKCHIP_RV1108) += \ rv1108-elgin-r1.dtb \ diff --git a/arch/arm/dts/rk3588-generic-u-boot.dtsi b/arch/arm/dts/rk3588-generic-u-boot.dtsi new file mode 100644 index 000000000000..853ed58cfe58 --- /dev/null +++ b/arch/arm/dts/rk3588-generic-u-boot.dtsi @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include "rk3588s-u-boot.dtsi" diff --git a/arch/arm/dts/rk3588-generic.dts b/arch/arm/dts/rk3588-generic.dts new file mode 100644 index 000000000000..e4721d97a87d --- /dev/null +++ b/arch/arm/dts/rk3588-generic.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Minimal generic DT for RK3588S/RK3588 with eMMC and SD-card enabled + */ + +/dts-v1/; +#include "rk3588s.dtsi" + +/ { + model = "Generic RK3588S/RK3588"; + compatible = "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + no-mmc; + no-sdio; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/board/rockchip/evb_rk3588/MAINTAINERS b/board/rockchip/evb_rk3588/MAINTAINERS index 2bd44bc58728..eb771da7b7a0 100644 --- a/board/rockchip/evb_rk3588/MAINTAINERS +++ b/board/rockchip/evb_rk3588/MAINTAINERS @@ -7,6 +7,13 @@ F: configs/evb-rk3588_defconfig F: arch/arm/dts/rk3588-evb1-v10.dts F: arch/arm/dts/rk3588-evb1-v10-u-boot.dtsi +GENERIC-RK3588 +M: Jonas Karlman <jonas(a)kwiboo.se> +S: Maintained +F: configs/generic-rk3588_defconfig +F: arch/arm/dts/rk3588-generic.dts +F: arch/arm/dts/rk3588-generic-u-boot.dtsi + ORANGEPI-5-RK3588 M: Jonas Karlman <jonas(a)kwiboo.se> S: Maintained diff --git a/configs/generic-rk3588_defconfig b/configs/generic-rk3588_defconfig new file mode 100644 index 000000000000..4755b27c1dea --- /dev/null +++ b/configs/generic-rk3588_defconfig @@ -0,0 +1,68 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_TEXT_BASE=0x00a00000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 +CONFIG_DEFAULT_DEVICE_TREE="rk3588-generic" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_TARGET_EVB_RK3588=y +CONFIG_SPL_STACK=0x400000 +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-generic.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_SPL_MMC_HS200_SUPPORT=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SPL_PINCTRL=y +CONFIG_SPL_RAM=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSRESET=y +CONFIG_ERRNO_STR=y diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 9fe69fc9422f..393c84a1309c 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -116,10 +116,11 @@ List of mainline supported Rockchip boards: - Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588) - Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588) - FriendlyElec NanoPC-T6 (nanopc-t6-rk3588) + - Generic RK3588S/RK3588 (generic-rk3588) - Pine64 QuartzPro64 (quartzpro64-rk3588) - - Turing Machines RK1 (turing-rk1-rk3588) - Radxa ROCK 5A (rock5a-rk3588s) - Radxa ROCK 5B (rock5b-rk3588) + - Turing Machines RK1 (turing-rk1-rk3588) - Xunlong Orange Pi 5 (orangepi-5-rk3588s) - Xunlong Orange Pi 5 Plus (orangepi-5-plus-rk3588) -- 2.43.0

2 5

[PATCH] board: rockchip: Add Pine64 PineTab2
by Jonas Karlman 14 Mar '24

14 Mar '24

The Pine64 PineTab2 is a tablet computer based on the Rockchip RK3566 SoC. The table features 4/8 GB LPDDR4 RAM and 64/128 GB eMMC storage. Features tested on a Pine64 PineTab2 8GB v2.0: - SD-card boot - eMMC boot - SPI Flash boot - USB host Device tree is imported from linux maintainer branch v6.9-armsoc/dts64, commit 1b7e19448f8f ("arm64: dts: rockchip: Add devicetree for Pine64 PineTab2"). Signed-off-by: Jonas Karlman <jonas(a)kwiboo.se> --- This patch depend on the series "rockchip: rk35xx: Sync device tree with linux v6.8-rc1" [1]. [1] https://patchwork.ozlabs.org/cover/1891669/ --- arch/arm/dts/Makefile | 2 + arch/arm/dts/rk3566-pinetab2-u-boot.dtsi | 44 + arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi | 3 + arch/arm/dts/rk3566-pinetab2-v0.1.dts | 28 + arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi | 3 + arch/arm/dts/rk3566-pinetab2-v2.0.dts | 48 + arch/arm/dts/rk3566-pinetab2.dtsi | 943 ++++++++++++++++++ board/pine64/quartz64_rk3566/MAINTAINERS | 11 + configs/pinetab2-rk3566_defconfig | 119 +++ doc/board/rockchip/rockchip.rst | 1 + 10 files changed, 1202 insertions(+) create mode 100644 arch/arm/dts/rk3566-pinetab2-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-pinetab2-v0.1.dts create mode 100644 arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-pinetab2-v2.0.dts create mode 100644 arch/arm/dts/rk3566-pinetab2.dtsi create mode 100644 configs/pinetab2-rk3566_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 50f35e3db3f0..825fa1cd368a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -173,6 +173,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ rk3566-anbernic-rgxx3.dtb \ + rk3566-pinetab2-v0.1.dtb \ + rk3566-pinetab2-v2.0.dtb \ rk3566-quartz64-a.dtb \ rk3566-quartz64-b.dtb \ rk3566-radxa-cm3-io.dtb \ diff --git a/arch/arm/dts/rk3566-pinetab2-u-boot.dtsi b/arch/arm/dts/rk3566-pinetab2-u-boot.dtsi new file mode 100644 index 000000000000..4aa6ab1c848c --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-u-boot.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include "rk356x-u-boot.dtsi" + +&fspi_dual_io_pins { + bootph-all; +}; + +&gpio0 { + bootph-all; +}; + +&i2c0 { + bootph-pre-ram; +}; + +&rk817 { + bootph-pre-ram; + + regulators { + bootph-pre-ram; + }; +}; + +&sdhci { + cap-mmc-highspeed; +}; + +&sdmmc_pwren_l { + bootph-all; +}; + +&sfc { + bootph-pre-ram; + u-boot,spl-sfc-no-dma; + + flash@0 { + bootph-pre-ram; + }; +}; + +&vcc3v3_sd { + bootph-pre-ram; +}; diff --git a/arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi b/arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi new file mode 100644 index 000000000000..061dc3c2c375 --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include "rk3566-pinetab2-u-boot.dtsi" diff --git a/arch/arm/dts/rk3566-pinetab2-v0.1.dts b/arch/arm/dts/rk3566-pinetab2-v0.1.dts new file mode 100644 index 000000000000..5fe6ca5da9d3 --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-v0.1.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-pinetab2.dtsi" + +/ { + model = "Pine64 PineTab2 v0.1"; + compatible = "pine64,pinetab2-v0.1", "pine64,pinetab2", "rockchip,rk3566"; +}; + +&lcd { + reset-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>; +}; + +&pinctrl { + lcd0 { + lcd0_rst_l: lcd0-rst-l { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc1 { + vmmc-supply = <&vcc3v3_sys>; +}; diff --git a/arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi b/arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi new file mode 100644 index 000000000000..061dc3c2c375 --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include "rk3566-pinetab2-u-boot.dtsi" diff --git a/arch/arm/dts/rk3566-pinetab2-v2.0.dts b/arch/arm/dts/rk3566-pinetab2-v2.0.dts new file mode 100644 index 000000000000..9349541cbbd0 --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-v2.0.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-pinetab2.dtsi" + +/ { + model = "Pine64 PineTab2 v2.0"; + compatible = "pine64,pinetab2-v2.0", "pine64,pinetab2", "rockchip,rk3566"; +}; + +&gpio_keys { + pinctrl-0 = <&kb_id_det>, <&hall_int_l>; + + event-hall-sensor { + debounce-interval = <20>; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + label = "Hall Sensor"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; +}; + +&lcd { + reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>; +}; + +&pinctrl { + lcd0 { + lcd0_rst_l: lcd0-rst-l { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hall { + hall_int_l: hall-int-l { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc1 { + vmmc-supply = <&vcc_sys>; +}; diff --git a/arch/arm/dts/rk3566-pinetab2.dtsi b/arch/arm/dts/rk3566-pinetab2.dtsi new file mode 100644 index 000000000000..db40281eafbe --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2.dtsi @@ -0,0 +1,943 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/usb/pd.h> +#include "rk3566.dtsi" + +/ { + chassis-type = "tablet"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc0; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <25>; + + button-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <297500>; + }; + + button-vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <1750>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 25000 0>; + brightness-levels = <20 220>; + num-interpolated-steps = <200>; + default-brightness-level = <100>; + power-supply = <&vcc_sys>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <6000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4300000>; + voltage-max-design-microvolt = <4350000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4322000 100>, <4250000 95>, <4192000 90>, <4136000 85>, + <4080000 80>, <4022000 75>, <3972000 70>, <3928000 65>, + <3885000 60>, <3833000 55>, <3798000 50>, <3780000 45>, + <3776000 40>, <3773000 35>, <3755000 30>, <3706000 25>, + <3640000 20>, <3589000 15>, <3535000 10>, <3492000 5>, + <3400000 0>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&kb_id_det>; + + tablet-mode-switch { + debounce-interval = <20>; + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + label = "Tablet Mode"; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + led-0 { + compatible = "regulator-led"; + vled-supply = <&vcc5v0_flashled>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_FLASH; + }; + + rk817-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_l>; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + + simple-audio-card,routing = + "MICR", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amplifier OUTL", + "Internal Speakers", "Speaker Amplifier OUTR", + "Speaker Amplifier INL", "HPOL", + "Speaker Amplifier INR", "HPOR"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>; + simple-audio-card,aux-devs = <&speaker_amp>; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + }; + + speaker_amp: speaker-amplifier { + compatible = "simple-audio-amplifier"; + pinctrl-names = "default"; + pinctrl-0 = <&spk_ctl>; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amplifier"; + VCC-supply = <&vcc_bat>; + }; + + vcc_3v3: vcc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_minipcie: vcc3v3-minipcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwren_h>; + regulator-name = "vcc3v3_minipcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcc3v3_sd: vcc3v3-sd-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwren_l>; + regulator-name = "vcc3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_flashled: vcc5v0-flashled-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&flash_led_en_h>; + regulator-name = "vcc5v0_flashled"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v_midu>; + }; + + vcc5v0_usb_host0: vcc5v0-usb-host0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren1_h>; + regulator-name = "vcc5v0_usb_host0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v_midu>; + }; + + vcc5v0_usb_host2: vcc5v0-usb-host2-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren2_h>; + regulator-name = "vcc5v0_usb_host2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v_midu>; + }; + + vcc_bat: vcc-bat-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_bat"; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_bat>; + }; + + vdd1v2_dvp: vdd1v2-dvp-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd1v2_dvp"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc_3v3>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&cru { + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, <200000000>, <500000000>; + assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>; +}; + +&csi_dphy { + status = "okay"; +}; + +&dsi0 { + status = "okay"; + clock-master; + #address-cells = <1>; + #size-cells = <0>; + + lcd: panel@0 { + compatible = "boe,th101mb31ig002-28a"; + reg = <0>; + backlight = <&backlight>; + enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + rotation = <90>; + power-supply = <&vcc_3v3>; + + port@0 { + panel_in_dsi: endpoint@0 { + remote-endpoint = <&dsi0_out_con>; + }; + }; + }; +}; + +&dsi0_in { + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; +}; + +&dsi0_out { + dsi0_out_con: endpoint { + remote-endpoint = <&panel_in_dsi>; + }; +}; + +&dsi_dphy0 { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_npu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda_0v9_p>; + avdd-1v8-supply = <&vcc_1v8>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc5v_midu>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu_npu: DCDC_REG2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc3v3_sys"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdda_0v9_p: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9_p"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v_midu: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vbus: OTG_SWITCH { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_l_pmuio2>, <&tp_rst_l_pmuio2>; + AVDD28-supply = <&vcc3v3_pmu>; + VDDIO-supply = <&vcca1v8_pmu>; + irq-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c2m1_xfer>; + status = "okay"; + + vcm@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + vcc-supply = <&vcc1v8_dvp>; + }; + + camera@36 { + compatible = "ovti,ov5648"; + reg = <0x36>; + pinctrl-names = "default"; + pinctrl-0 = <&camerab_pdn_l &camerab_rst_l>; + + clocks = <&cru CLK_CIF_OUT>; + assigned-clocks = <&cru CLK_CIF_OUT>; + assigned-clock-rates = <24000000>; + + avdd-supply = <&vcc2v8_dvp>; + dvdd-supply = <&vdd1v2_dvp>; + dovdd-supply = <&vcc1v8_dvp>; + powerdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; + + port { + endpoint { + data-lanes = <1 2>; + remote-endpoint = <0>; + link-frequencies = /bits/ 64 <210000000 168000000>; + }; + }; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + accelerometer@18 { + compatible = "silan,sc7a20"; + reg = <0x18>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int_l>; + st,drdy-int-pin = <1>; + vdd-supply = <&vcc_1v8>; + vddio-supply = <&vcc_1v8>; + mount-matrix = "1", "0", "0", + "0", "0", "1", + "0", "1", "0"; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_minipcie>; + status = "okay"; +}; + +&pinctrl { + camerab { + camerab_pdn_l: camerab-pdn-l { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + camerab_rst_l: camerab-rst-l { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cameraf { + cameraf_pdn_l: cameraf-pdn-l { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cameraf_rst_l: cameraf-rst-l { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + flash { + flash_led_en_h: flash-led-en-h { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fspi { + fspi_dual_io_pins: fspi-dual-io-pins { + rockchip,pins = + /* fspi_clk */ + <1 RK_PD0 1 &pcfg_pull_none>, + /* fspi_cs0n */ + <1 RK_PD3 1 &pcfg_pull_none>, + /* fspi_d0 */ + <1 RK_PD1 1 &pcfg_pull_none>, + /* fspi_d1 */ + <1 RK_PD2 1 &pcfg_pull_none>; + }; + }; + + gsensor { + gsensor_int_l: gsensor-int-l { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + kb { + kb_id_det: kb-id-det { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_pwren_h: lcd-pwren-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_pwren_h: pcie-pwren-h { + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc_pwren_l: sdmmc-pwren-l { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_det_l: hp-det-l { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + spk_ctl: spk-ctl { + rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + tp { + tp_int_l_pmuio2: tp-int-l-pmuio2 { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + tp_rst_l_pmuio2: tp-rst-l-pmuio2 { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usbcc_int_l: usbcc-int-l { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_host_pwren1_h: usb-host-pwren1-h { + rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_host_pwren2_h: usb-host-pwren2-h { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + host_wake_wl: host-wake-wl { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_wake_host_h: wifi-wake-host-h { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcca1v8_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_1v8>; + vccio6-supply = <&vcc1v8_dvp>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs200-1_8v; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 + &emmc_clk + &emmc_cmd + &emmc_datastrobe + &emmc_rstnout>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 + &sdmmc0_clk + &sdmmc0_cmd + &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 + &sdmmc1_cmd + &sdmmc1_clk>; + sd-uhs-sdr104; + vqmmc-supply = <&vcca1v8_pmu>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspi_dual_io_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host0>; + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host2>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/board/pine64/quartz64_rk3566/MAINTAINERS b/board/pine64/quartz64_rk3566/MAINTAINERS index 6b75b35a1243..37b8c1eb78b6 100644 --- a/board/pine64/quartz64_rk3566/MAINTAINERS +++ b/board/pine64/quartz64_rk3566/MAINTAINERS @@ -21,3 +21,14 @@ F: arch/arm/dts/rk3566-soquartz-cm4.dts F: arch/arm/dts/rk3566-soquartz-cm4-u-boot.dtsi F: arch/arm/dts/rk3566-soquartz-model-a.dts F: arch/arm/dts/rk3566-soquartz-model-a-u-boot.dtsi + +PINETAB2-RK3566 +M: Jonas Karlman <jonas(a)kwiboo.se> +S: Maintained +F: configs/pinetab2-rk3566_defconfig +F: arch/arm/dts/rk3566-pinetab2.dtsi +F: arch/arm/dts/rk3566-pinetab2-u-boot.dtsi +F: arch/arm/dts/rk3566-pinetab2-v0.1.dts +F: arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi +F: arch/arm/dts/rk3566-pinetab2-v2.0.dts +F: arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig new file mode 100644 index 000000000000..19b396eef975 --- /dev/null +++ b/configs/pinetab2-rk3566_defconfig @@ -0,0 +1,119 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_TEXT_BASE=0x00a00000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x1000 +CONFIG_DEFAULT_DEVICE_TREE="rk3566-pinetab2-v2.0" +CONFIG_ROCKCHIP_RK3568=y +CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_TARGET_QUARTZ64_RK3566=y +CONFIG_SPL_STACK=0x400000 +CONFIG_DEBUG_UART_BASE=0xFE660000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-pinetab2-v2.0.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_POWEROFF=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_LIST="rk3566-pinetab2-v0.1 rk3566-pinetab2-v2.0" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_BUTTON=y +CONFIG_BUTTON_ADC=y +CONFIG_BUTTON_GPIO=y +CONFIG_SPL_CLK=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SF_DEFAULT_BUS=4 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_SILICONKAISER=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_SPL_PMIC_RK8XX=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_SPL_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_PSCI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_PRODUCT_NUM=0x350a +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=y diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 9fe69fc9422f..fda2282b2c26 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -93,6 +93,7 @@ List of mainline supported Rockchip boards: * rk3566 - Anbernic RGxx3 (anbernic-rgxx3-rk3566) + - Pine64 PineTab2 (pinetab2-rk3566) - Pine64 Quartz64-A Board (quartz64-a-rk3566) - Pine64 Quartz64-B Board (quartz64-b-rk3566) - Pine64 SOQuartz on Blade (soquartz-blade-rk3566) -- 2.43.0

2 4